Angle of Internal Friction given Factor of Safety for Cohesive Soil Solution

STEP 0: Pre-Calculation Summary
Formula Used
Angle of Internal Friction of Soil = atan(((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/Normal Stress)
ฮฆi = atan(((๐œShearstress*fs)-cu)/ฯƒNormal)
This formula uses 2 Functions, 5 Variables
Functions Used
tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
atan - Inverse tan is used to calculate the angle by applying the tangent ratio of the angle, which is the opposite side divided by the adjacent side of the right triangle., atan(Number)
Variables Used
Angle of Internal Friction of Soil - (Measured in Radian) - Angle of Internal Friction of Soil is a shear strength parameter of soils.
Shear Stress for Factor of Safety - (Measured in Pascal) - Shear Stress for Factor of Safety is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
Unit Cohesion - (Measured in Pascal) - Unit Cohesion is the force that holds together molecules or like particles within a soil.
Normal Stress - (Measured in Pascal) - Normal stress is defined as the stress produced by the perpendicular action of a force on a given area.
STEP 1: Convert Input(s) to Base Unit
Shear Stress for Factor of Safety: 5 Pascal --> 5 Pascal No Conversion Required
Factor of Safety: 2.8 --> No Conversion Required
Unit Cohesion: 10 Pascal --> 10 Pascal No Conversion Required
Normal Stress: 0.8 Pascal --> 0.8 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ฮฆi = atan(((๐œShearstress*fs)-cu)/ฯƒNormal) --> atan(((5*2.8)-10)/0.8)
Evaluating ... ...
ฮฆi = 1.37340076694502
STEP 3: Convert Result to Output's Unit
1.37340076694502 Radian -->78.6900675259946 Degree (Check conversion here)
FINAL ANSWER
78.6900675259946 โ‰ˆ 78.69007 Degree <-- Angle of Internal Friction of Soil
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

25 Stability Analysis of Infinite Slopes Calculators

Unit Weight of Soil given Critical Depth for Cohesive Soil
Go Unit Weight of Soil = Cohesion of Soil/(Critical Depth*(tan((Angle of Inclination))-tan((Angle of Internal Friction)))*(cos((Angle of Inclination)))^2)
Cohesion given Critical Depth for Cohesive Soil
Go Cohesion of Soil = (Critical Depth*Unit Weight of Soil*(tan((Angle of Inclination))-tan((Angle of Internal Friction)))*(cos((Angle of Inclination)))^2)
Critical Depth for Cohesive Soil
Go Critical Depth = Cohesion of Soil/(Unit Weight of Soil*(tan((Angle of Inclination))-tan((Angle of Internal Friction)))*(cos((Angle of Inclination)))^2)
Cohesion given Shear Strength of Cohesive Soil
Go Cohesion of Soil = Shear Strength in KN per Cubic Meter-(Normal Stress in Soil Mechanics*tan((Angle of Internal Friction of Soil*pi)/180))
Cohesion of Soil given Factor of Safety for Cohesive Soil
Go Cohesion of Soil = (Shear Stress in Cohesive Soil*Factor of Safety)-(Normal Stress in Soil Mechanics*tan((Angle of Internal Friction)))
Normal Stress given Factor of Safety for Cohesive Soil
Go Normal Stress = ((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/tan((Angle of Internal Friction of Soil))
Shear Stress given Factor of Safety for Cohesive Soil
Go Shear Stress for Factor of Safety = (Unit Cohesion+(Normal Stress*tan((Angle of Internal Friction of Soil))))/Factor of Safety
Shear Strength of Soil given Angle of Internal Friction
Go Shear Strength = (Shear Stress for Factor of Safety*(tan(Angle of Internal Friction of Soil)/tan(Angle of Inclination)))
Shear Stress of Soil given Angle of Internal Friction
Go Shear Stress for Factor of Safety = Shear Strength/(tan((Angle of Internal Friction))/tan((Angle of Inclination)))
Angle of Internal Friction given Shear Strength of Soil
Go Angle of Internal Friction of Soil = atan((Shear Strength/Shear Stress)*tan((Angle of Inclination)))
Normal Stress given Shear Strength of Cohesive Soil
Go Normal Stress in Mega Pascal = (Shear Strength-Cohesion of Soil)/tan((Angle of Internal Friction))
Shear Strength of Cohesive Soil
Go Shear Strength = Cohesion of Soil+(Normal Stress in Mega Pascal*tan((Angle of Internal Friction)))
Factor of Safety against Sliding given Angle of Internal Friction
Go Factor of Safety = (tan((Angle of Internal Friction of Soil))/tan((Angle of Inclination)))
Unit Weight of Soil given Stability Number for Cohesive Soil
Go Unit Weight of Soil = (Cohesion of Soil/(Stability Number*Critical Depth for Stability Number))
Critical Depth given Stability Number for Cohesive Soil
Go Critical Depth for Stability Number = (Cohesion of Soil/(Unit Weight of Soil*Stability Number))
Cohesion given Stability Number for Cohesive Soil
Go Cohesion of Soil = Stability Number*(Unit Weight of Soil*Critical Depth for Stability Number)
Normal Stress given Shear Stress of Cohesionless Soil
Go Normal Stress in Mega Pascal = Shear Stress for Factor of Safety*cot((Angle of Inclination))
Unit Weight of Soil given Mobilised Cohesion
Go Unit Weight of Soil = (Mobilised Cohesion/(Stability Number*Depth at Mobilised Cohesion))
Depth at Mobilised Cohesion
Go Depth at Mobilised Cohesion = (Mobilised Cohesion/(Unit Weight of Soil*Stability Number))
Mobilised Cohesion given Stability Number for Cohesive Soil
Go Mobilised Cohesion = (Stability Number*Unit Weight of Soil*Depth at Mobilised Cohesion)
Normal Stress given Shear Strength of Cohesionless Soil
Go Normal Stress in Mega Pascal = Shear Strength/tan((Angle of Internal Friction))
Shear Strength of Cohesionless Soil
Go Shear Strength = Normal Stress in Mega Pascal*tan((Angle of Internal Friction))
Angle of Internal Friction given Shear Strength of Cohesionless Soil
Go Angle of Internal Friction = atan(Shear Strength/Normal Stress in Mega Pascal)
Cohesion of Soil given Mobilised Cohesion
Go Cohesion of Soil = Mobilised Cohesion*Factor of Safety with respect to Cohesion
Mobilised Cohesion
Go Mobilised Cohesion = Cohesion of Soil/Factor of Safety with respect to Cohesion

Angle of Internal Friction given Factor of Safety for Cohesive Soil Formula

Angle of Internal Friction of Soil = atan(((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/Normal Stress)
ฮฆi = atan(((๐œShearstress*fs)-cu)/ฯƒNormal)

What is Angle of Internal Friction?

The angle of internal friction is a physical property of earth materials or the slope of a linear representation of the shear strength of earth materials.

How to Calculate Angle of Internal Friction given Factor of Safety for Cohesive Soil?

Angle of Internal Friction given Factor of Safety for Cohesive Soil calculator uses Angle of Internal Friction of Soil = atan(((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/Normal Stress) to calculate the Angle of Internal Friction of Soil, The Angle of Internal Friction given Factor of Safety for Cohesive Soil is defined as the slope's angle at which cohesive soil reaches a factor of safety limit. Angle of Internal Friction of Soil is denoted by ฮฆi symbol.

How to calculate Angle of Internal Friction given Factor of Safety for Cohesive Soil using this online calculator? To use this online calculator for Angle of Internal Friction given Factor of Safety for Cohesive Soil, enter Shear Stress for Factor of Safety (๐œShearstress), Factor of Safety (fs), Unit Cohesion (cu) & Normal Stress (ฯƒNormal) and hit the calculate button. Here is how the Angle of Internal Friction given Factor of Safety for Cohesive Soil calculation can be explained with given input values -> 5140.288 = atan(((5*2.8)-10)/0.8).

FAQ

What is Angle of Internal Friction given Factor of Safety for Cohesive Soil?
The Angle of Internal Friction given Factor of Safety for Cohesive Soil is defined as the slope's angle at which cohesive soil reaches a factor of safety limit and is represented as ฮฆi = atan(((๐œShearstress*fs)-cu)/ฯƒNormal) or Angle of Internal Friction of Soil = atan(((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/Normal Stress). Shear Stress for Factor of Safety is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress, Factor of Safety expresses how much stronger a system is than it needs to be for an intended load, Unit Cohesion is the force that holds together molecules or like particles within a soil & Normal stress is defined as the stress produced by the perpendicular action of a force on a given area.
How to calculate Angle of Internal Friction given Factor of Safety for Cohesive Soil?
The Angle of Internal Friction given Factor of Safety for Cohesive Soil is defined as the slope's angle at which cohesive soil reaches a factor of safety limit is calculated using Angle of Internal Friction of Soil = atan(((Shear Stress for Factor of Safety*Factor of Safety)-Unit Cohesion)/Normal Stress). To calculate Angle of Internal Friction given Factor of Safety for Cohesive Soil, you need Shear Stress for Factor of Safety (๐œShearstress), Factor of Safety (fs), Unit Cohesion (cu) & Normal Stress (ฯƒNormal). With our tool, you need to enter the respective value for Shear Stress for Factor of Safety, Factor of Safety, Unit Cohesion & Normal Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Angle of Internal Friction of Soil?
In this formula, Angle of Internal Friction of Soil uses Shear Stress for Factor of Safety, Factor of Safety, Unit Cohesion & Normal Stress. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Angle of Internal Friction of Soil = atan((Shear Strength/Shear Stress)*tan((Angle of Inclination)))
  • Angle of Internal Friction of Soil = atan((Shear Strength-Unit Cohesion)/Normal Stress)
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!