Atomicity given Internal Molar Energy of Linear Molecule Solution

STEP 0: Pre-Calculation Summary
Formula Used
Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6
N = ((U/(0.5*[R]*T))+5)/6
This formula uses 1 Constants, 3 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324
Variables Used
Atomicity - The Atomicity is defined as the total number of atoms present in a molecule or element.
Internal Molar Energy - (Measured in Joule Per Mole) - The Internal Molar Energy of a thermodynamic system is the energy contained within it. It is the energy necessary to create or prepare the system in any given internal state.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
STEP 1: Convert Input(s) to Base Unit
Internal Molar Energy: 700 Joule Per Mole --> 700 Joule Per Mole No Conversion Required
Temperature: 85 Kelvin --> 85 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
N = ((U/(0.5*[R]*T))+5)/6 --> ((700/(0.5*[R]*85))+5)/6
Evaluating ... ...
N = 1.16349273933297
STEP 3: Convert Result to Output's Unit
1.16349273933297 --> No Conversion Required
FINAL ANSWER
1.16349273933297 1.163493 <-- Atomicity
(Calculation completed in 00.020 seconds)

Credits

Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verified by Prashant Singh
K J Somaiya College of science (K J Somaiya), Mumbai
Prashant Singh has verified this Calculator and 500+ more calculators!

22 Atomicity Calculators

Atomicity given Molar Heat Capacity at Constant Pressure and Volume of Linear Molecule
Go Atomicity = ((2.5*( Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-1.5)/((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-3)
Atomicity given Molar Heat Capacity at Constant Pressure and Volume of Non-Linear Molecule
Go Atomicity = ((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-2)/((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-3)
Atomicity given Molar Heat Capacity at Constant Pressure of Linear Molecule
Go Atomicity = (((Molar Specific Heat Capacity at Constant Pressure-[R])/[R])+2.5)/3
Atomicity given Molar Heat Capacity at Constant Pressure of Non-Linear Molecule
Go Atomicity = (((Molar Specific Heat Capacity at Constant Pressure-[R])/[R])+3)/3
Atomicity given Average Thermal Energy of Linear Polyatomic Gas Molecule
Go Atomicity = ((Internal Molar Energy/(0.5*[BoltZ]*Temperature))+5)/6
Atomicity given Internal Molar Energy of Non-Linear Molecule
Go Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+6)/6
Atomicity given Internal Molar Energy of Linear Molecule
Go Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6
Atomicity given Molar Vibrational Energy of Non-Linear Molecule
Go Atomicity = ((Molar Vibrational Energy/([R]*Temperature))+6)/3
Atomicity given Molar Vibrational Energy of Linear Molecule
Go Atomicity = ((Molar Vibrational Energy/([R]*Temperature))+5)/3
Atomicity given Average Thermal Energy of Non-linear Polyatomic Gas Molecule
Go Atomicity = ((Thermal Energy/(0.5*[BoltZ]*Temperature))+6)/6
Atomicity given Vibrational Energy of Non-Linear Molecule
Go Atomicity = ((Vibrational Energy/([BoltZ]*Temperature))+6)/3
Atomicity given Vibrational Energy of Linear Molecule
Go Atomicity = ((Vibrational Energy/([BoltZ]*Temperature))+5)/3
Atomicity given Ratio of Molar Heat Capacity of Linear Molecule
Go Atomicity = ((2.5*Ratio of Molar Heat Capacity)-1.5)/((3*Ratio of Molar Heat Capacity)-3)
Atomicity given Ratio of Molar Heat Capacity of Non-Linear Molecule
Go Atomicity = ((3*Ratio of Molar Heat Capacity)-2)/((3*Ratio of Molar Heat Capacity)-3)
Atomicity given Molar Heat Capacity at Constant Volume of Linear Molecule
Go Atomicity = ((Molar Specific Heat Capacity at Constant Volume/[R])+2.5)/3
Atomicity given Molar Heat Capacity at Constant Volume of Non-Linear Molecule
Go Atomicity = ((Molar Specific Heat Capacity at Constant Volume/[R])+3)/3
Atomicity given Vibrational Mode of Non-Linear Molecule
Go Atomicity = (Number of Normal modes+6)/3
Atomicity given Vibrational Mode of Linear Molecule
Go Atomicity = (Number of Normal modes+5)/3
Atomicity given Vibrational Degree of Freedom in Non-Linear Molecule
Go Atomicity = (Degree of Freedom+6)/3
Atomicity given Vibrational Degree of Freedom in Linear Molecule
Go Atomicity = (Degree of Freedom+5)/3
Atomicity given Number of modes in Non-Linear Molecule
Go Atomicity = (Number of Modes+6)/6
Atomicity given Number of modes in Linear Molecule
Go Atomicity = (Number of Modes+5)/6

Atomicity given Internal Molar Energy of Linear Molecule Formula

Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6
N = ((U/(0.5*[R]*T))+5)/6

What is the statement of Equipartition Theorem?

The original concept of equipartition was that the total kinetic energy of a system is shared equally among all of its independent parts, on the average, once the system has reached thermal equilibrium. Equipartition also makes quantitative predictions for these energies. The key point is that the kinetic energy is quadratic in the velocity. The equipartition theorem shows that in thermal equilibrium, any degree of freedom (such as a component of the position or velocity of a particle) which appears only quadratically in the energy has an average energy of ​1⁄2kBT and therefore contributes ​1⁄2kB to the system's heat capacity.

How to Calculate Atomicity given Internal Molar Energy of Linear Molecule?

Atomicity given Internal Molar Energy of Linear Molecule calculator uses Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6 to calculate the Atomicity, The Atomicity given Internal Molar Energy of Linear Molecule is defined as the total number of atoms present in a molecule of a element. Atomicity is denoted by N symbol.

How to calculate Atomicity given Internal Molar Energy of Linear Molecule using this online calculator? To use this online calculator for Atomicity given Internal Molar Energy of Linear Molecule, enter Internal Molar Energy (U) & Temperature (T) and hit the calculate button. Here is how the Atomicity given Internal Molar Energy of Linear Molecule calculation can be explained with given input values -> 1.163493 = ((700/(0.5*[R]*85))+5)/6.

FAQ

What is Atomicity given Internal Molar Energy of Linear Molecule?
The Atomicity given Internal Molar Energy of Linear Molecule is defined as the total number of atoms present in a molecule of a element and is represented as N = ((U/(0.5*[R]*T))+5)/6 or Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6. The Internal Molar Energy of a thermodynamic system is the energy contained within it. It is the energy necessary to create or prepare the system in any given internal state & Temperature is the degree or intensity of heat present in a substance or object.
How to calculate Atomicity given Internal Molar Energy of Linear Molecule?
The Atomicity given Internal Molar Energy of Linear Molecule is defined as the total number of atoms present in a molecule of a element is calculated using Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+5)/6. To calculate Atomicity given Internal Molar Energy of Linear Molecule, you need Internal Molar Energy (U) & Temperature (T). With our tool, you need to enter the respective value for Internal Molar Energy & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Atomicity?
In this formula, Atomicity uses Internal Molar Energy & Temperature. We can use 21 other way(s) to calculate the same, which is/are as follows -
  • Atomicity = (((Molar Specific Heat Capacity at Constant Pressure-[R])/[R])+2.5)/3
  • Atomicity = (((Molar Specific Heat Capacity at Constant Pressure-[R])/[R])+3)/3
  • Atomicity = ((Molar Specific Heat Capacity at Constant Volume/[R])+2.5)/3
  • Atomicity = ((Molar Specific Heat Capacity at Constant Volume/[R])+3)/3
  • Atomicity = ((Internal Molar Energy/(0.5*[BoltZ]*Temperature))+5)/6
  • Atomicity = ((Thermal Energy/(0.5*[BoltZ]*Temperature))+6)/6
  • Atomicity = ((Internal Molar Energy/(0.5*[R]*Temperature))+6)/6
  • Atomicity = ((2.5*( Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-1.5)/((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-3)
  • Atomicity = ((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-2)/((3*(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))-3)
  • Atomicity = ((Molar Vibrational Energy/([R]*Temperature))+5)/3
  • Atomicity = ((Molar Vibrational Energy/([R]*Temperature))+6)/3
  • Atomicity = (Number of Modes+5)/6
  • Atomicity = (Number of Modes+6)/6
  • Atomicity = ((2.5*Ratio of Molar Heat Capacity)-1.5)/((3*Ratio of Molar Heat Capacity)-3)
  • Atomicity = ((3*Ratio of Molar Heat Capacity)-2)/((3*Ratio of Molar Heat Capacity)-3)
  • Atomicity = (Degree of Freedom+5)/3
  • Atomicity = (Degree of Freedom+6)/3
  • Atomicity = ((Vibrational Energy/([BoltZ]*Temperature))+5)/3
  • Atomicity = ((Vibrational Energy/([BoltZ]*Temperature))+6)/3
  • Atomicity = (Number of Normal modes+5)/3
  • Atomicity = (Number of Normal modes+6)/3
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!