Average Harbor Depth given Portion caused by Filling Solution

STEP 0: Pre-Calculation Summary
Formula Used
Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling
h' = Δh/αf
This formula uses 3 Variables
Variables Used
Average Harbor Depth - (Measured in Meter) - Average Harbor Depth from its nomenclature can be suggested that is different from regular ports in respect of the depth of water.
Difference between High and Low Tide level - (Measured in Meter) - Difference between High and Low Tide level is the difference between the two tide levels.
Portion caused by Filling - Portion caused by Filling influencing the Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.
STEP 1: Convert Input(s) to Base Unit
Difference between High and Low Tide level: 21 Meter --> 21 Meter No Conversion Required
Portion caused by Filling: 3.5 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h' = Δh/αf --> 21/3.5
Evaluating ... ...
h' = 6
STEP 3: Convert Result to Output's Unit
6 Meter --> No Conversion Required
FINAL ANSWER
6 Meter <-- Average Harbor Depth
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

23 Density Currents in Harbors Calculators

Cross-Sectional Area of Entrance given Water Volume exchanged during entire Tide Period
Go Cross Sectional Area of Entrance = Total Water Volume/(Coefficient for Harbors*sqrt(Broad Sense Heritability*Average Harbor Depth))
Total Water Volume Exchanged during entire Tide Period
Go Total Water Volume = Coefficient for Harbors*Cross Sectional Area of Entrance*sqrt(Broad Sense Heritability*Average Harbor Depth)
Average Depth of Harbor for Water Volume Exchanged during Entire Tide Period
Go Average Harbor Depth = ((Total Water Volume/Coefficient for Harbors*Cross Sectional Area of Entrance)^(1/2 ))/Broad Sense Heritability
Total Harbor Volume based upon Depth given difference between High and Low Tide Levels
Go Total Harbor Volume = Tidal Prism Filling Bay/(Difference between High and Low Tide level/Average Harbor Depth)
Tidal Prism of Harbor Basin given Difference between High and Low Tide Levels
Go Tidal Prism Filling Bay = Total Harbor Volume*(Difference between High and Low Tide level/Average Harbor Depth)
Difference between High and Low Tide Levels given Tidal Prism of Harbor Basin
Go Difference between High and Low Tide level = (Tidal Prism Filling Bay/Total Harbor Volume)*Average Harbor Depth
Velocity in Dry Bed Curve
Go Velocity in Dry Bed Curve = 0.45*sqrt(Broad Sense Heritability*[g]*Water Depth)
Average Harbor Depth
Go Average Harbor Depth = (Difference between High and Low Tide level*Total Harbor Volume)/Tidal Prism Filling Bay
Minimum River Density given Relative Density
Go Minimum River Density = -((Broad Sense Heritability*Average River Density)-Maximum River Density)
Average River Density over one Tide Period given Relative Density
Go Average River Density = (Maximum River Density-Minimum River Density)/Broad Sense Heritability
Maximum River Density given Relative Density
Go Maximum River Density = (Broad Sense Heritability*Average River Density)+Minimum River Density
Relative Density given River Density
Go Broad Sense Heritability = (Maximum River Density-Minimum River Density)/Average River Density
Water Depth given Velocity in Dry Bed Curve
Go Water Depth = ((Velocity in Dry Bed Curve/0.45)^2)/(Broad Sense Heritability*[g])
Relative Density given Velocity in Dry Bed Curve
Go Broad Sense Heritability = Velocity in Dry Bed Curve^2/(0.45*[g]*Water Depth)
Difference between High and Low Tide Levels given Portion caused by Filling
Go Difference between High and Low Tide level = Average Harbor Depth*Portion caused by Filling
Portion caused by Filling given Average Harbor Depth
Go Portion caused by Filling = Difference between High and Low Tide level/Average Harbor Depth
Average Harbor Depth given Portion caused by Filling
Go Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling
Portion caused by Filling Evaluated by Comparing Tidal Prism of Harbor to Total Harbor Volume
Go Portion caused by Filling = Tidal Prism Filling Bay/Total Harbor Volume
Total Harbor Volume based upon Depth
Go Total Harbor Volume = Tidal Prism Filling Bay/Portion caused by Filling
Tidal Prism of Harbor Basin
Go Tidal Prism Filling Bay = Portion caused by Filling*Total Harbor Volume
Portion caused by Filling given Ratio of Water Volume Entering Harbor per Tide
Go Portion caused by Filling = Ratio of Water Volume-Density Influence
Density Influence given Ratio of Water Volume entering Harbor per Tide
Go Density Influence = Ratio of Water Volume-Portion caused by Filling
Ratio of Water Volume entering Harbor per Tide to Harbor Volume
Go Ratio of Water Volume = Portion caused by Filling+Density Influence

Average Harbor Depth given Portion caused by Filling Formula

Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling
h' = Δh/αf

What is Density Current?

Density current, any current in either a liquid or a gas that is kept in motion by the force of gravity acting on differences in density. A density difference can exist between two fluids because of a difference in temperature, salinity, or concentration of suspended sediment.

How to Calculate Average Harbor Depth given Portion caused by Filling?

Average Harbor Depth given Portion caused by Filling calculator uses Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling to calculate the Average Harbor Depth, The Average Harbor Depth given Portion caused by Filling formula is defined as it gives ratio of total water exchange volume to harbour volume. Average Harbor Depth is denoted by h' symbol.

How to calculate Average Harbor Depth given Portion caused by Filling using this online calculator? To use this online calculator for Average Harbor Depth given Portion caused by Filling, enter Difference between High and Low Tide level (Δh) & Portion caused by Filling f) and hit the calculate button. Here is how the Average Harbor Depth given Portion caused by Filling calculation can be explained with given input values -> 6 = 21/3.5.

FAQ

What is Average Harbor Depth given Portion caused by Filling?
The Average Harbor Depth given Portion caused by Filling formula is defined as it gives ratio of total water exchange volume to harbour volume and is represented as h' = Δh/αf or Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling. Difference between High and Low Tide level is the difference between the two tide levels & Portion caused by Filling influencing the Ratio of Water Volume entering the Harbor per Tide to the Harbor Volume.
How to calculate Average Harbor Depth given Portion caused by Filling?
The Average Harbor Depth given Portion caused by Filling formula is defined as it gives ratio of total water exchange volume to harbour volume is calculated using Average Harbor Depth = Difference between High and Low Tide level/Portion caused by Filling. To calculate Average Harbor Depth given Portion caused by Filling, you need Difference between High and Low Tide level (Δh) & Portion caused by Filling f). With our tool, you need to enter the respective value for Difference between High and Low Tide level & Portion caused by Filling and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Average Harbor Depth?
In this formula, Average Harbor Depth uses Difference between High and Low Tide level & Portion caused by Filling. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Average Harbor Depth = ((Total Water Volume/Coefficient for Harbors*Cross Sectional Area of Entrance)^(1/2 ))/Broad Sense Heritability
  • Average Harbor Depth = (Difference between High and Low Tide level*Total Harbor Volume)/Tidal Prism Filling Bay
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!