Average output voltage Calculator

Category	Engineering ↺
Engineering	Electronics ↺
Electronics	Power Electronics ↺
Power-Electronics	Controlled rectifiers ↺
Controlled-Rectifiers	Three phase semi-converter ↺

✖Peak input voltage is the peak value of the sinusoidal input voltage V_msin(wt) to the converter.ⓘ Peak input voltage [V_m]			+10% -10%
✖Delay angle of thyristor is the angle at which thyristors are triggered after zero crossingⓘ Delay angle of thyristor [α]			+10% -10%

✖Average output voltage is the average dc value of the output voltage.ⓘ Average output voltage [V_dc]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Devyaani Garg

Shiv Nadar University (SNU), Greater Noida

Devyaani Garg has created this Calculator and 50+ more calculators!

Nikita Suryawanshi

Vellore Institute of Technology (VIT), Vellore

Nikita Suryawanshi has verified this Calculator and 25+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

RMS output voltage of single phase semi-converter with highly inductive load

RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO

RMS output voltage of single phase thyristor converter with resistive load

RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO

Average output voltage of single phase thyristor converter with resistive load

Average output voltage=(Peak input voltage/(2*pi))*(1+cos(Delay angle of thyristor)) GO

Average output voltage of a single phase full converter with highly inductive load

Average output voltage=(2*Peak input voltage/(pi))*(cos(Delay angle of thyristor)) GO

Average output voltage of single phase semi-converter with highly inductive load

Average output voltage=(Peak input voltage/pi)*(1+cos(Delay angle of thyristor)) GO

Normalized output voltage of a single phase semi-converter with highly inductive load

Normalized output voltage=0.5*(1+cos(Delay angle of thyristor)) GO

Normalized voltage of a single phase thyristor converter with resistive load

Normalized output voltage=0.5*(1+cos(Delay angle of thyristor)) GO

Normalized output voltage of single phase full converter with highly inductive load

Normalized output voltage=(cos(Delay angle of thyristor)) GO

Maximum output voltage of a single phase semi-converter with highly inductive load

Maximum output voltage=2*Peak input voltage/pi GO

Maximum output voltage of a single phase full converter with highly inductive load

Maximum output voltage=2*Peak input voltage/pi GO

Maximum output voltage of single phase thyristor converter with resistive load

Maximum output voltage=Peak input voltage/pi GO

< 7 Other formulas that calculate the same Output

DC output voltage of second controller

Average output voltage=2*Peak input voltage*(cos(Delay angle of second converter))/pi GO

Average output voltage of single phase thyristor converter with resistive load

Average output voltage=(Peak input voltage/(2*pi))*(1+cos(Delay angle of thyristor)) GO

DC output voltage for first converter

Average output voltage=2*Peak input voltage*(cos(Delay angle of first converter))/pi GO

Average output voltage of a single phase full converter with highly inductive load

Average output voltage=(2*Peak input voltage/(pi))*(cos(Delay angle of thyristor)) GO

Average output voltage of single phase semi-converter with highly inductive load

Average output voltage=(Peak input voltage/pi)*(1+cos(Delay angle of thyristor)) GO

Average output voltage for continuous load current

Average output voltage=2.6*Peak input voltage*(cos(Delay angle of thyristor))/pi GO

Average output voltage

Average output voltage=5.2*Peak input voltage*(cos(Delay angle of thyristor))/pi GO

Average output voltage Formula

Average output voltage=2.6*Peak input voltage*(1+(cos(Delay angle of thyristor)))/pi
V<sub>dc</sub>=2.6*V<sub>m</sub>*(1+(cos(α)))/pi

More formulas

Maximum average output voltage GO

Normalized average output voltage GO

RMS output voltage GO

Average output current GO

What are three-phase semi-converter?

Three-phase semi-converters are used in industrial applications up to 120 kW level where one quadrant operation is required. The power factor of this converter decreases as the delay angle increases but it is better than that of three-phase half wave converter.

How to Calculate Average output voltage?

Average output voltage calculator uses Average output voltage=2.6*Peak input voltage*(1+(cos(Delay angle of thyristor)))/pi to calculate the Average output voltage, The Average output voltage formula is the average dc value of the output voltage. It is directly proportional to the peak input voltage of the converter. Average output voltage and is denoted by V_dc symbol.

How to calculate Average output voltage using this online calculator? To use this online calculator for Average output voltage, enter Peak input voltage (V_m) and Delay angle of thyristor (α) and hit the calculate button. Here is how the Average output voltage calculation can be explained with given input values -> 15.44333 = 2.6*10*(1+(cos(0.5235987755982)))/pi.

FAQ

What is Average output voltage?

The Average output voltage formula is the average dc value of the output voltage. It is directly proportional to the peak input voltage of the converter and is represented as V_dc=2.6*V_m*(1+(cos(α)))/pi or Average output voltage=2.6*Peak input voltage*(1+(cos(Delay angle of thyristor)))/pi. Peak input voltage is the peak value of the sinusoidal input voltage V_msin(wt) to the converter and Delay angle of thyristor is the angle at which thyristors are triggered after zero crossing.

How to calculate Average output voltage?

The Average output voltage formula is the average dc value of the output voltage. It is directly proportional to the peak input voltage of the converter is calculated using Average output voltage=2.6*Peak input voltage*(1+(cos(Delay angle of thyristor)))/pi. To calculate Average output voltage, you need Peak input voltage (V_m) and Delay angle of thyristor (α). With our tool, you need to enter the respective value for Peak input voltage and Delay angle of thyristor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Average output voltage?

In this formula, Average output voltage uses Peak input voltage and Delay angle of thyristor. We can use 7 other way(s) to calculate the same, which is/are as follows -

Average output voltage=(Peak input voltage/(2*pi))*(1+cos(Delay angle of thyristor))
Average output voltage=(Peak input voltage/pi)*(1+cos(Delay angle of thyristor))
Average output voltage=(2*Peak input voltage/(pi))*(cos(Delay angle of thyristor))
Average output voltage=2*Peak input voltage*(cos(Delay angle of first converter))/pi
Average output voltage=2*Peak input voltage*(cos(Delay angle of second converter))/pi
Average output voltage=2.6*Peak input voltage*(cos(Delay angle of thyristor))/pi
Average output voltage=5.2*Peak input voltage*(cos(Delay angle of thyristor))/pi

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!