Axial Thrust Load on Bearing given Race Rotation Factor Solution

STEP 0: Pre-Calculation Summary
Formula Used
Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing
Fa = (Peq-(X*V*Fr))/Y
This formula uses 6 Variables
Variables Used
Axial or thrust load acting on bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.
Equivalent dynamic load on bearing - (Measured in Newton) - Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.
Radial Factor - Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.
Race-rotation factor - Race-rotation factor is a factor accounting for the rotation of the races of a bearing.
Radial load acting on bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Thrust Factor for Bearing - Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.
STEP 1: Convert Input(s) to Base Unit
Equivalent dynamic load on bearing: 9650 Newton --> 9650 Newton No Conversion Required
Radial Factor: 0.56 --> No Conversion Required
Race-rotation factor: 1.2 --> No Conversion Required
Radial load acting on bearing: 8050 Newton --> 8050 Newton No Conversion Required
Thrust Factor for Bearing: 1.5 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Fa = (Peq-(X*V*Fr))/Y --> (9650-(0.56*1.2*8050))/1.5
Evaluating ... ...
Fa = 2826.93333333333
STEP 3: Convert Result to Output's Unit
2826.93333333333 Newton --> No Conversion Required
FINAL ANSWER
2826.93333333333 2826.933 Newton <-- Axial or thrust load acting on bearing
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

21 Rolling Contact Bearing Configuration Calculators

Radial Factor of Roller Contact Bearing given Race Rotation Factor
Go Radial Factor = (Equivalent dynamic load on bearing-(Thrust Factor for Bearing*Axial or thrust load acting on bearing))/(Race-rotation factor*Radial load acting on bearing)
Radial Load on Bearing given Race Rotation Factor
Go Radial load acting on bearing = (Equivalent dynamic load on bearing-(Thrust Factor for Bearing*Axial or thrust load acting on bearing))/(Radial Factor*Race-rotation factor)
Race Rotation Factor of Roller Contact Bearing
Go Race-rotation factor = (Equivalent dynamic load on bearing-(Thrust Factor for Bearing*Axial or thrust load acting on bearing))/(Radial Factor*Radial load acting on bearing)
Axial Thrust Load on Bearing given Race Rotation Factor
Go Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing
Thrust factor of Bearing given Race Rotation Factor
Go Thrust Factor for Bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Axial or thrust load acting on bearing
Radial Factor of Roller Contact Bearing
Go Radial Factor = (Equivalent dynamic load on bearing-(Thrust Factor for Bearing*Axial or thrust load acting on bearing))/(Radial load acting on bearing)
Radial Load on Bearing
Go Radial load acting on bearing = (Equivalent dynamic load on bearing-(Thrust Factor for Bearing*Axial or thrust load acting on bearing))/(Radial Factor)
Axial Thrust Load on Bearing given Thrust Factor
Go Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Radial load acting on bearing))/Thrust Factor for Bearing
Thrust factor of Bearing
Go Thrust Factor for Bearing = (Equivalent dynamic load on bearing-(Radial Factor*Radial load acting on bearing))/Axial or thrust load acting on bearing
Number of Bearings required given Reliability
Go Number of Bearings = (log10(Reliability of Bearing System))/(log10(Reliability of Bearing))
Load on Bearing given Moment on bearing
Go Load Acting on Bearing = Friction moment on bearing/(Coefficient of friction for bearing*(Bore Diameter of bearing/2))
Coefficient of Friction of Roller Contact Bearing
Go Coefficient of friction for bearing = 2*Friction moment on bearing/(Bore Diameter of bearing*Load Acting on Bearing)
Friction Moment on Roller Contact Bearing
Go Friction moment on bearing = Coefficient of friction for bearing*Load Acting on Bearing*(Bore Diameter of bearing/2)
Bore Diameter of Bearing
Go Bore Diameter of bearing = 2*Friction moment on bearing/(Coefficient of friction for bearing*Load Acting on Bearing)
Reliability of Bearing
Go Reliability of Bearing = e^(-(Corresponding Life of Bearing/Constant a of Bearing)^Constant b of Bearing)
Train Wheel Diameter considering Bearing Life
Go Train Wheel Diameter = (1000/(pi*Rated Bearing Life))*Nominal Life in Millions of Kilometers
Nominal Life of Roller Contact Bearing
Go Nominal Life in Millions of Kilometers = Rated Bearing Life/(1000/(pi*Train Wheel Diameter))
Speed of Rotation of Bearing
Go Speed of bearing in rpm = Rated Bearing Life*(10^6)/(60*Rated Bearing Life in Hours)
Reliability of Bearing given Number of Bearings
Go Reliability of Bearing = Reliability of Bearing System^(1/Number of Bearings)
Reliability of Complete Bearing System
Go Reliability of Bearing System = Reliability of Bearing^Number of Bearings
Median Life of Roller Contact Bearing
Go Median Life of Bearing = 5*Rated Bearing Life

Axial Thrust Load on Bearing given Race Rotation Factor Formula

Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing
Fa = (Peq-(X*V*Fr))/Y

What is a rolling contact bearing?

The term rolling contact bearings refers to the wide variety of bearings that use spherical balls or some other type of roller between the stationary and the moving elements. • The most common type of bearing supports a rotating shaft, resisting purely radial loads or a combination of radial and axial (thrust) loads

How to Calculate Axial Thrust Load on Bearing given Race Rotation Factor?

Axial Thrust Load on Bearing given Race Rotation Factor calculator uses Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing to calculate the Axial or thrust load acting on bearing, Axial Thrust Load on Bearing given Race Rotation Factor is the thrust load acting onto the bearing in the axial direction to the bearing. Axial or thrust load acting on bearing is denoted by Fa symbol.

How to calculate Axial Thrust Load on Bearing given Race Rotation Factor using this online calculator? To use this online calculator for Axial Thrust Load on Bearing given Race Rotation Factor, enter Equivalent dynamic load on bearing (Peq), Radial Factor (X), Race-rotation factor (V), Radial load acting on bearing (Fr) & Thrust Factor for Bearing (Y) and hit the calculate button. Here is how the Axial Thrust Load on Bearing given Race Rotation Factor calculation can be explained with given input values -> 2826.933 = (9650-(0.56*1.2*8050))/1.5.

FAQ

What is Axial Thrust Load on Bearing given Race Rotation Factor?
Axial Thrust Load on Bearing given Race Rotation Factor is the thrust load acting onto the bearing in the axial direction to the bearing and is represented as Fa = (Peq-(X*V*Fr))/Y or Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing. Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing, Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load, Race-rotation factor is a factor accounting for the rotation of the races of a bearing, Radial load acting on bearing is the amount of load onto the bearing acting radially & Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.
How to calculate Axial Thrust Load on Bearing given Race Rotation Factor?
Axial Thrust Load on Bearing given Race Rotation Factor is the thrust load acting onto the bearing in the axial direction to the bearing is calculated using Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Race-rotation factor*Radial load acting on bearing))/Thrust Factor for Bearing. To calculate Axial Thrust Load on Bearing given Race Rotation Factor, you need Equivalent dynamic load on bearing (Peq), Radial Factor (X), Race-rotation factor (V), Radial load acting on bearing (Fr) & Thrust Factor for Bearing (Y). With our tool, you need to enter the respective value for Equivalent dynamic load on bearing, Radial Factor, Race-rotation factor, Radial load acting on bearing & Thrust Factor for Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Axial or thrust load acting on bearing?
In this formula, Axial or thrust load acting on bearing uses Equivalent dynamic load on bearing, Radial Factor, Race-rotation factor, Radial load acting on bearing & Thrust Factor for Bearing. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Axial or thrust load acting on bearing = (Equivalent dynamic load on bearing-(Radial Factor*Radial load acting on bearing))/Thrust Factor for Bearing
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!