Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors Solution

STEP 0: Pre-Calculation Summary
Formula Used
Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal)
Nc = (qf-((σ`*Nq)+(0.5*γ*B*Nγ*sγ )))/(sc *C)
This formula uses 10 Variables
Variables Used
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Ultimate Bearing Capacity - (Measured in Pascal) - The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Effective Surcharge - (Measured in Pascal) - Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Shape Factor Dependent on Unit Weight - Shape factor dependent on unit weight of soil.
Shape Factor dependent on Cohesion - Shape Factor dependent on Cohesion is defined as ratio of the limit unit base resistance of a footing of any shape bearing on the soil surface to that of a strip footing on the soil surface.
Cohesion in Soil as Kilopascal - (Measured in Pascal) - Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
STEP 1: Convert Input(s) to Base Unit
Ultimate Bearing Capacity: 60 Kilopascal --> 60000 Pascal (Check conversion here)
Effective Surcharge: 10 Pascal --> 10 Pascal No Conversion Required
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Shape Factor Dependent on Unit Weight: 1.6 --> No Conversion Required
Shape Factor dependent on Cohesion: 1.7 --> No Conversion Required
Cohesion in Soil as Kilopascal: 1.27 Kilopascal --> 1270 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Nc = (qf-((σ`*Nq)+(0.5*γ*B*Nγ*sγ )))/(sc *C) --> (60000-((10*2.01)+(0.5*18000*2*1.6*1.6 )))/(1.7 *1270)
Evaluating ... ...
Nc = 6.43811949976841
STEP 3: Convert Result to Output's Unit
6.43811949976841 --> No Conversion Required
FINAL ANSWER
6.43811949976841 6.438119 <-- Bearing Capacity Factor dependent on Cohesion
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

23 Specialization of Terzaghi's Equations Calculators

Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors
Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal)
Cohesion of Soil depending on Shape Factors
Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Bearing Capacity Factor dependent on Cohesion)
Shape Factor Dependent on Cohesion
Go Shape Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Bearing Capacity Factor dependent on Cohesion *Cohesion in Soil as Kilopascal)
Bearing Capacity Factor Dependent on Unit Weight depending on Shape Factors
Go Bearing Capacity Factor dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Shape Factor Dependent on Unit Weight)
Unit Weight of Soil given Shape Factor
Go Unit Weight of Soil = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing*Shape Factor Dependent on Unit Weight)
Shape Factor Dependent on Unit Weight
Go Shape Factor Dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)
Width of Footing given Shape Factor
Go Width of Footing = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Unit Weight of Soil*Shape Factor Dependent on Unit Weight)
Bearing Capacity depending on Shape Factors
Go Ultimate Bearing Capacity = (Shape Factor dependent on Cohesion*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)
Effective Surcharge given Square Footing and Bearing Capacity
Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8 )))/Bearing Capacity Factor dependent on Surcharge
Effective Surcharge given Round Footing and Bearing Capacity
Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.6 )))/Bearing Capacity Factor dependent on Surcharge
Effective Surcharge given Strip Footing and Bearing Capacity
Go Effective Surcharge in KiloPascal = (Ultimate Bearing Capacity-((1 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*1 )))/Bearing Capacity Factor dependent on Surcharge
Unit Weight of Soil given Square Footing and Bearing Capacity
Go Unit Weight of Soil = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing*0.8)
Unit Weight of Soil given Round Footing and Bearing Capacity
Go Unit Weight of Soil = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing*0.6)
Cohesion of Soil given Square Footing and Bearing Capacity
Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8 )))/(1.3*Bearing Capacity Factor dependent on Cohesion)
Width of Footing given Square Footing and Bearing Capacity
Go Width of Footing = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Unit Weight of Soil*0.8)
Cohesion of Soil given Round Footing and Bearing Capacity
Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.6 )))/(1.3*Bearing Capacity Factor dependent on Cohesion)
Width of Footing given Round Footing and Bearing Capacity
Go Width of Footing = (Ultimate Bearing Capacity-((1.3 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Unit Weight of Soil*0.6)
Unit Weight of Soil given Strip Footing and Bearing Capacity
Go Unit Weight of Soil = (Ultimate Bearing Capacity-((1 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing*1)
Cohesion of Soil given Strip Footing and Bearing Capacity
Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*1 )))/(1*Bearing Capacity Factor dependent on Cohesion)
Width of Footing given Strip Footing and Bearing Capacity
Go Width of Footing = (Ultimate Bearing Capacity-((1 *Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Unit Weight of Soil*1)
Bearing Capacity for Square Footing
Go Ultimate Bearing Capacity = (1.3*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.8)
Bearing Capacity for Round Footing
Go Ultimate Bearing Capacity = (1.3*Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*0.6)
Bearing Capacity for Strip Footing
Go Ultimate Bearing Capacity = (Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)

Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors Formula

Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal)
Nc = (qf-((σ`*Nq)+(0.5*γ*B*Nγ*sγ )))/(sc *C)

What is Bearing Capacity?

In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.

How to Calculate Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors?

Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors calculator uses Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal) to calculate the Bearing Capacity Factor dependent on Cohesion, The Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors is defined as the ability of underlying soil to support foundation loads without shear failure. Bearing Capacity Factor dependent on Cohesion is denoted by Nc symbol.

How to calculate Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors using this online calculator? To use this online calculator for Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors, enter Ultimate Bearing Capacity (qf), Effective Surcharge (σ`), Bearing Capacity Factor dependent on Surcharge (Nq), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (Nγ), Shape Factor Dependent on Unit Weight (sγ), Shape Factor dependent on Cohesion (sc) & Cohesion in Soil as Kilopascal (C) and hit the calculate button. Here is how the Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors calculation can be explained with given input values -> 6.438166 = (60000-((10*2.01)+(0.5*18000*2*1.6*1.6 )))/(1.7 *1270).

FAQ

What is Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors?
The Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors is defined as the ability of underlying soil to support foundation loads without shear failure and is represented as Nc = (qf-((σ`*Nq)+(0.5*γ*B*Nγ*sγ )))/(sc *C) or Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal). The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Width of Footing is the shorter dimension of the footing, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil, Shape factor dependent on unit weight of soil, Shape Factor dependent on Cohesion is defined as ratio of the limit unit base resistance of a footing of any shape bearing on the soil surface to that of a strip footing on the soil surface & Cohesion in Soil as Kilopascal is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
How to calculate Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors?
The Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors is defined as the ability of underlying soil to support foundation loads without shear failure is calculated using Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight )))/(Shape Factor dependent on Cohesion *Cohesion in Soil as Kilopascal). To calculate Bearing Capacity Factor Dependent on Cohesion Depending on Shape Factors, you need Ultimate Bearing Capacity (qf), Effective Surcharge (σ`), Bearing Capacity Factor dependent on Surcharge (Nq), Unit Weight of Soil (γ), Width of Footing (B), Bearing Capacity Factor dependent on Unit Weight (Nγ), Shape Factor Dependent on Unit Weight (sγ), Shape Factor dependent on Cohesion (sc) & Cohesion in Soil as Kilopascal (C). With our tool, you need to enter the respective value for Ultimate Bearing Capacity, Effective Surcharge, Bearing Capacity Factor dependent on Surcharge, Unit Weight of Soil, Width of Footing, Bearing Capacity Factor dependent on Unit Weight, Shape Factor Dependent on Unit Weight, Shape Factor dependent on Cohesion & Cohesion in Soil as Kilopascal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!