Boiling Point using Trouton's Rule in terms of Specific Latent Heat Solution

STEP 0: Pre-Calculation Summary
Formula Used
Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
bp = (Lspecific*MW)/(10.5*[R])
This formula uses 1 Constants, 3 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324 Joule / Kelvin * Mole
Variables Used
Boiling Point - (Measured in Kelvin) - Boiling Point is the temperature at which a liquid starts to boil and transforms to vapor.
Specific Latent Heat - (Measured in Joule per Kilogram) - The Specific Latent Heat is energy released or absorbed, by a body or a thermodynamic system, during a constant-temperature process.
Molecular Weight - (Measured in Kilogram) - Molecular Weight is the mass of a given molecule.
STEP 1: Convert Input(s) to Base Unit
Specific Latent Heat: 15 Joule per Kilogram --> 15 Joule per Kilogram No Conversion Required
Molecular Weight: 1.2 Kilogram --> 1.2 Kilogram No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
bp = (Lspecific*MW)/(10.5*[R]) --> (15*1.2)/(10.5*[R])
Evaluating ... ...
bp = 0.206181180073245
STEP 3: Convert Result to Output's Unit
0.206181180073245 Kelvin --> No Conversion Required
FINAL ANSWER
0.206181180073245 Kelvin <-- Boiling Point
(Calculation completed in 00.015 seconds)

Credits

Created by Prerana Bakli
National Institute of Technology (NIT), Meghalaya
Prerana Bakli has created this Calculator and 800+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

10+ Clausius-Clapeyron Equation Calculators

Enthalpy using integrated form of Clausius-Clapeyron Equation
Change in Enthalpy = (-ln(Final Pressure of System/Initial Pressure of System)*[R])/((1/Final Temperature)-(1/Initial Temperature)) Go
Initial Pressure using Integrated Form of Clausius-Clapeyron Equation
Initial Pressure of System = Final Pressure of System/(exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R])) Go
Final Pressure using integrated form of Clausius-Clapeyron Equation
Final Pressure of System = (exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R]))*Initial Pressure of System Go
Final Temperature using integrated form of Clausius-Clapeyron Equation
Final Temperature = 1/((-(ln(Final Pressure of System/Initial Pressure of System)*[R])/Latent Heat)+(1/Initial Temperature)) Go
Initial Temperature using integrated form of Clausius-Clapeyron Equation
Initial Temperature = 1/(((ln(Final Pressure of System/Initial Pressure of System)*[R])/Latent Heat)+(1/Final Temperature)) Go
Ratio of vapour pressure using integrated form of Clausius-Clapeyron Equation
Ratio of Vapor Pressure = exp(-(Latent Heat*((1/Final Temperature)-(1/Initial Temperature)))/[R]) Go
Specific latent heat of evaporation of water near standard temperature and pressure
Specific Latent Heat = (Slope of coexistence curve of Water Vapor*[R]*(Temperature^2))/Saturation Vapor Pressure Go
Temperature for transitions
Temperature = -Latent Heat/((ln(Pressure)-Integration constant)* [R]) Go
Pressure for transitions between gas and condensed phase
Pressure = exp(-Latent Heat/([R]*Temperature))+Integration constant Go
August Roche Magnus Formula
Saturation Vapour Pressure = 6.1094*exp((17.625*Temperature)/(Temperature+243.04)) Go

Boiling Point using Trouton's Rule in terms of Specific Latent Heat Formula

Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R])
bp = (Lspecific*MW)/(10.5*[R])

What does Trouton's Rule state?

Trouton’s rule states that the entropy of vaporization is almost the same value, about 85–88 J K−1 mol−1, for various kinds of liquids at their boiling points. The entropy of vaporization is defined as the ratio between the enthalpy of vaporization and the boiling temperature. It is named after Frederick Thomas Trouton.

How to Calculate Boiling Point using Trouton's Rule in terms of Specific Latent Heat?

Boiling Point using Trouton's Rule in terms of Specific Latent Heat calculator uses Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R]) to calculate the Boiling Point, The Boiling Point using Trouton's Rule in terms of Specific Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor. Boiling Point is denoted by bp symbol.

How to calculate Boiling Point using Trouton's Rule in terms of Specific Latent Heat using this online calculator? To use this online calculator for Boiling Point using Trouton's Rule in terms of Specific Latent Heat, enter Specific Latent Heat (Lspecific) & Molecular Weight (MW) and hit the calculate button. Here is how the Boiling Point using Trouton's Rule in terms of Specific Latent Heat calculation can be explained with given input values -> 0.206181 = (15*1.2)/(10.5*[R]).

FAQ

What is Boiling Point using Trouton's Rule in terms of Specific Latent Heat?
The Boiling Point using Trouton's Rule in terms of Specific Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor and is represented as bp = (Lspecific*MW)/(10.5*[R]) or Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R]). The Specific Latent Heat is energy released or absorbed, by a body or a thermodynamic system, during a constant-temperature process & Molecular Weight is the mass of a given molecule.
How to calculate Boiling Point using Trouton's Rule in terms of Specific Latent Heat?
The Boiling Point using Trouton's Rule in terms of Specific Latent Heat is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor is calculated using Boiling Point = (Specific Latent Heat*Molecular Weight)/(10.5*[R]). To calculate Boiling Point using Trouton's Rule in terms of Specific Latent Heat, you need Specific Latent Heat (Lspecific) & Molecular Weight (MW). With our tool, you need to enter the respective value for Specific Latent Heat & Molecular Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Boiling Point?
In this formula, Boiling Point uses Specific Latent Heat & Molecular Weight. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Boiling Point = Enthalpy/(10.5*[R])
  • Boiling Point = Latent Heat/(10.5*[R])
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!