Catchment Area when Recharge from Rainfall is Considered Calculator

✖Recharge from Rainfall in Monsoon Season over a catchment under study.ⓘ Recharge from Rainfall in Monsoon Season [R_rfm]			+10% -10%
✖Rainfall Infiltration Factor for recharge from rainfall is the indirect method for estimating the groundwater recharge.ⓘ Rainfall Infiltration Factor [f]			+10% -10%
✖Normal Rainfall in Monsoon Season is the amount of precipitation that we expect per year (in a given area).ⓘ Normal Rainfall in Monsoon Season [P_nm]			+10% -10%

✖The area of computation for recharge is the recharge area receiving the water from infiltration, rainfall and percolation.ⓘ Catchment Area when Recharge from Rainfall is Considered [A_cr]

⎘ Copy

👎

Formula

✖

Catchment Area when Recharge from Rainfall is Considered

Formula

`"A"_{"cr"} = "R"_{"rfm"}/("f"*"P"_{"nm"})`

Example

`"13.25758m²"="7m³/s"/("22"*"0.024m")`

Calculator

LaTeX

Reset

👍

Download Engineering Hydrology Formula PDF

Catchment Area when Recharge from Rainfall is Considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season)
A_cr = R_rfm/(f*P_nm)
This formula uses 4 Variables

Variables Used

Area of Computation for Recharge - (Measured in Square Meter) - The area of computation for recharge is the recharge area receiving the water from infiltration, rainfall and percolation.
Recharge from Rainfall in Monsoon Season - (Measured in Cubic Meter per Second) - Recharge from Rainfall in Monsoon Season over a catchment under study.
Rainfall Infiltration Factor - Rainfall Infiltration Factor for recharge from rainfall is the indirect method for estimating the groundwater recharge.
Normal Rainfall in Monsoon Season - (Measured in Meter) - Normal Rainfall in Monsoon Season is the amount of precipitation that we expect per year (in a given area).

STEP 1: Convert Input(s) to Base Unit

Recharge from Rainfall in Monsoon Season: 7 Cubic Meter per Second --> 7 Cubic Meter per Second No Conversion Required
Rainfall Infiltration Factor: 22 --> No Conversion Required
Normal Rainfall in Monsoon Season: 0.024 Meter --> 0.024 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_cr = R_rfm/(f*P_nm) --> 7/(22*0.024)

Evaluating ... ...

A_cr = 13.2575757575758

STEP 3: Convert Result to Output's Unit

13.2575757575758 Square Meter --> No Conversion Required

FINAL ANSWER

13.2575757575758 ≈ 13.25758 Square Meter <-- Area of Computation for Recharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Rainfall Infiltration Method » Catchment Area when Recharge from Rainfall is Considered

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 4 Rainfall Infiltration Method Calculators

Rainfall Infiltration Factor when Recharge from Rainfall is Considered

Go Rainfall Infiltration Factor = Recharge from Rainfall in Monsoon Season/(Area of Computation for Recharge*Normal Rainfall in Monsoon Season)

Catchment Area when Recharge from Rainfall is Considered

Go Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season)

Normal Rainfall in Monsoon Season

Go Normal Rainfall in Monsoon Season = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Area of Computation for Recharge)

Recharge from Rainfall in Monsoon Season by Rainfall Infiltration Method

Go Recharge from Rainfall in Monsoon Season = Rainfall Infiltration Factor*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Catchment Area when Recharge from Rainfall is Considered Formula

Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season)
A_cr = R_rfm/(f*P_nm)

What is Recharge in Hydrology?

Groundwater recharge or deep drainage or deep percolation is a hydrologic process, where water moves downward from surface water to groundwater. Recharge is the primary method through which water enters an aquifer.

How to Calculate Catchment Area when Recharge from Rainfall is Considered?

Catchment Area when Recharge from Rainfall is Considered calculator uses Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season) to calculate the Area of Computation for Recharge, The Catchment Area when Recharge from Rainfall is Considered is the area where each drop of precipitation that falls into a catchment area eventually ends up in the same river going to the sea if it doesn't evaporate. Area of Computation for Recharge is denoted by A_cr symbol.

How to calculate Catchment Area when Recharge from Rainfall is Considered using this online calculator? To use this online calculator for Catchment Area when Recharge from Rainfall is Considered, enter Recharge from Rainfall in Monsoon Season (R_rfm), Rainfall Infiltration Factor (f) & Normal Rainfall in Monsoon Season (P_nm) and hit the calculate button. Here is how the Catchment Area when Recharge from Rainfall is Considered calculation can be explained with given input values -> 13.25758 = 7/(22*0.024).

FAQ

What is Catchment Area when Recharge from Rainfall is Considered?

The Catchment Area when Recharge from Rainfall is Considered is the area where each drop of precipitation that falls into a catchment area eventually ends up in the same river going to the sea if it doesn't evaporate and is represented as A_cr = R_rfm/(f*P_nm) or Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season). Recharge from Rainfall in Monsoon Season over a catchment under study, Rainfall Infiltration Factor for recharge from rainfall is the indirect method for estimating the groundwater recharge & Normal Rainfall in Monsoon Season is the amount of precipitation that we expect per year (in a given area).

How to calculate Catchment Area when Recharge from Rainfall is Considered?

The Catchment Area when Recharge from Rainfall is Considered is the area where each drop of precipitation that falls into a catchment area eventually ends up in the same river going to the sea if it doesn't evaporate is calculated using Area of Computation for Recharge = Recharge from Rainfall in Monsoon Season/(Rainfall Infiltration Factor*Normal Rainfall in Monsoon Season). To calculate Catchment Area when Recharge from Rainfall is Considered, you need Recharge from Rainfall in Monsoon Season (R_rfm), Rainfall Infiltration Factor (f) & Normal Rainfall in Monsoon Season (P_nm). With our tool, you need to enter the respective value for Recharge from Rainfall in Monsoon Season, Rainfall Infiltration Factor & Normal Rainfall in Monsoon Season and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search