Charging Voltage from Resistance Charging Circuit Solution

STEP 0: Pre-Calculation Summary
Formula Used
Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging)))
Vc = V0*(1-exp(-1/(Rc*C*fc)))
This formula uses 1 Functions, 5 Variables
Functions Used
exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)
Variables Used
Voltage at any time t - (Measured in Volt) - Voltage at any time t is the charging voltage in the circuit at any given time.
Voltage of Power Supply - (Measured in Volt) - Voltage of power supply is the voltage required to charge a given device within given time.
Resistance of the Charging Circuit - (Measured in Ohm) - Resistance of the charging circuit is the resistance of the charging circuit.
Capacitance - (Measured in Farad) - Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential.
Frequency of Charging - (Measured in Hertz) - Frequency of charging is the frequency at which the circuit capacitor is charged.
STEP 1: Convert Input(s) to Base Unit
Voltage of Power Supply: 10 Volt --> 10 Volt No Conversion Required
Resistance of the Charging Circuit: 0.18 Ohm --> 0.18 Ohm No Conversion Required
Capacitance: 6.22 Farad --> 6.22 Farad No Conversion Required
Frequency of Charging: 4 Cycle per Second --> 4 Hertz (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vc = V0*(1-exp(-1/(Rc*C*fc))) --> 10*(1-exp(-1/(0.18*6.22*4)))
Evaluating ... ...
Vc = 2.00120376757859
STEP 3: Convert Result to Output's Unit
2.00120376757859 Volt --> No Conversion Required
FINAL ANSWER
2.00120376757859 2.001204 Volt <-- Voltage at any time t
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has verified this Calculator and 200+ more calculators!

5 Frequency of Charging Calculators

Charging Voltage from Resistance Charging Circuit
Go Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging)))
Supply Voltage
Go Voltage of Power Supply = Voltage at any time t/(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging)))
Resistance of Charging Circuit EDM
Go Resistance of the Charging Circuit = -1/(Frequency of Charging*Capacitance*ln(1-Voltage at any time t/Voltage of Power Supply))
Capacitance of Charging Circuit
Go Capacitance = -1/(Resistance of the Charging Circuit*Frequency of Charging*ln(1-Voltage at any time t/Voltage of Power Supply))
Frequency of Charging
Go Frequency of Charging = -1/(Resistance of the Charging Circuit*Capacitance*ln(1-Voltage at any time t/Voltage of Power Supply))

Charging Voltage from Resistance Charging Circuit Formula

Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging)))
Vc = V0*(1-exp(-1/(Rc*C*fc)))

How the spark is produced in Electric Discharge Machining ?

A typical circuit used for supplying the power to an EDM machine is named as the relaxation circuit. The circuit consists of a DC power source, which charges the capacitor ‘C’ across a resistance ‘Rc’. Initially when the capacitor is in the uncharged condition, when the power supply is on with a voltage of Vo, a heavy current, ic, will flow in the circuit as shown to charge the capacitor.The relaxation circuit as explained above was used in the early EDM machines. They are limited to the low material removal rates for fine finish, which limits its application. This can be explained from the fact that the time spent on charging the capacitor is quite large during which time, no machining can actually take place. Thus the material removal rates are low.

How to Calculate Charging Voltage from Resistance Charging Circuit?

Charging Voltage from Resistance Charging Circuit calculator uses Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging))) to calculate the Voltage at any time t, Charging voltage from resistance charging circuit formula is defined as the voltage at which the capacitor of charging circuit is being charged. Voltage at any time t is denoted by Vc symbol.

How to calculate Charging Voltage from Resistance Charging Circuit using this online calculator? To use this online calculator for Charging Voltage from Resistance Charging Circuit, enter Voltage of Power Supply (V0), Resistance of the Charging Circuit (Rc), Capacitance (C) & Frequency of Charging (fc) and hit the calculate button. Here is how the Charging Voltage from Resistance Charging Circuit calculation can be explained with given input values -> 0.022304 = 10*(1-exp(-1/(0.18*6.22*4))).

FAQ

What is Charging Voltage from Resistance Charging Circuit?
Charging voltage from resistance charging circuit formula is defined as the voltage at which the capacitor of charging circuit is being charged and is represented as Vc = V0*(1-exp(-1/(Rc*C*fc))) or Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging))). Voltage of power supply is the voltage required to charge a given device within given time, Resistance of the charging circuit is the resistance of the charging circuit, Capacitance is the ratio of the amount of electric charge stored on a conductor to a difference in electric potential & Frequency of charging is the frequency at which the circuit capacitor is charged.
How to calculate Charging Voltage from Resistance Charging Circuit?
Charging voltage from resistance charging circuit formula is defined as the voltage at which the capacitor of charging circuit is being charged is calculated using Voltage at any time t = Voltage of Power Supply*(1-exp(-1/(Resistance of the Charging Circuit*Capacitance*Frequency of Charging))). To calculate Charging Voltage from Resistance Charging Circuit, you need Voltage of Power Supply (V0), Resistance of the Charging Circuit (Rc), Capacitance (C) & Frequency of Charging (fc). With our tool, you need to enter the respective value for Voltage of Power Supply, Resistance of the Charging Circuit, Capacitance & Frequency of Charging and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!