Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe Calculator

✖Thermal stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered.ⓘ Thermal Stress [σ_t]			+10% -10%
✖Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa.ⓘ Modulus of Elasticity in Gpa [E_gpa]			+10% -10%
✖Final temperature is change in temperature to your substance's original temperature to find its final heat.ⓘ Final Temperature [T_f]			+10% -10%
✖Initial Temperature is the measure of hotness or coldness of a system at its initial state.ⓘ Initial Temperature [t_i]			+10% -10%

✖The Coefficient of Thermal Expansion is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe [α]

⎘ Copy

👎

Formula

✖

Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe

Formula

`"α" = "σ"_{"t"}/("E"_{"gpa"}*("T"_{"f"}-"t"_{"i"}))`

Example

`"0.000434°C⁻¹"="1.4GPa"/("200.0GPa"*("22°C"-"5.87°C"))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature))
α = σ_t/(E_gpa*(T_f-t_i))
This formula uses 5 Variables

Variables Used

Coefficient of Thermal Expansion - (Measured in Per Kelvin) - The Coefficient of Thermal Expansion is a material property that is indicative of the extent to which a material expands upon heating.
Thermal Stress - (Measured in Pascal) - Thermal stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered.
Modulus of Elasticity in Gpa - (Measured in Pascal) - Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa.
Final Temperature - (Measured in Celsius) - Final temperature is change in temperature to your substance's original temperature to find its final heat.
Initial Temperature - (Measured in Celsius) - Initial Temperature is the measure of hotness or coldness of a system at its initial state.

STEP 1: Convert Input(s) to Base Unit

Thermal Stress: 1.4 Gigapascal --> 1400000000 Pascal (Check conversion here)
Modulus of Elasticity in Gpa: 200 Gigapascal --> 200000000000 Pascal (Check conversion here)
Final Temperature: 22 Celsius --> 22 Celsius No Conversion Required
Initial Temperature: 5.87 Celsius --> 5.87 Celsius No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

α = σ_t/(E_gpa*(T_f-t_i)) --> 1400000000/(200000000000*(22-5.87))

Evaluating ... ...

α = 0.000433973961562306

STEP 3: Convert Result to Output's Unit

0.000433973961562306 Per Kelvin -->0.000433973961562306 Per Degree Celsius (Check conversion here)

FINAL ANSWER

0.000433973961562306 ≈ 0.000434 Per Degree Celsius <-- Coefficient of Thermal Expansion

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Conveyance of Water » Stresses in Pipes » Temperature Stresses » Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 9 Temperature Stresses Calculators

Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe

Go Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature))

Initial Temperature of Pipe using Temperature Stress Developed in Water Pipe

Go Initial Temperature = Final Temperature-(Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion))

Modulus of Elasticity of Pipe Material using Initial and Final Temperature

Go Modulus of Elasticity in Gpa = Thermal Stress/(Coefficient of Thermal Expansion*(Final Temperature-Initial Temperature))

Final Temperature of Pipe using Temperature Stress Developed in Water Pipe

Go Final Temperature = (Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion))+Initial Temperature

Temperature Stress using Initial and Final Temperature

Go Thermal Stress = Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion*(Final Temperature-Initial Temperature)

Coefficient of Thermal Expansion using Temperature Variation in Water Pipe

Go Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*Change in Temperature)

Temperature Variation using Thermal Stress Developed in Pipes

Go Change in Temperature = Thermal Stress/(Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion)

Modulus of Elasticity of Pipe Material

Go Modulus of Elasticity in Gpa = Thermal Stress/(Coefficient of Thermal Expansion*Change in Temperature)

Temperature Stress using Temperature Variation in Water Pipe

Go Thermal Stress = Modulus of Elasticity in Gpa*Coefficient of Thermal Expansion*Change in Temperature

Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe Formula

Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature))
α = σ_t/(E_gpa*(T_f-t_i))

What is Coefficient of Thermal Expansion?

The coefficient of thermal expansion describes how the size of an object changes with a change in temperature. Specifically, it measures the fractional change in size per degree change in temperature at a constant pressure, such that lower coefficients describe lower propensity for change in size.

How to Calculate Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe?

Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe calculator uses Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature)) to calculate the Coefficient of Thermal Expansion, The Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe is defined as the relative expansion of the steel pipe divided by the change in temperature for that pipe section. Coefficient of Thermal Expansion is denoted by α symbol.

How to calculate Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe using this online calculator? To use this online calculator for Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe, enter Thermal Stress (σ_t), Modulus of Elasticity in Gpa (E_gpa), Final Temperature (T_f) & Initial Temperature (t_i) and hit the calculate button. Here is how the Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe calculation can be explained with given input values -> 0.000434 = 1400000000/(200000000000*(295.15-279.02)).

FAQ

What is Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe?

The Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe is defined as the relative expansion of the steel pipe divided by the change in temperature for that pipe section and is represented as α = σ_t/(E_gpa*(T_f-t_i)) or Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature)). Thermal stress is the stress produced by any change in the temperature of the material. Thermal stress is induced in a body when the temperature of the body is raised or lowered, Modulus of Elasticity in Gpa is the unit of measurement of an object's or substance's resistance to being deformed elastically when a stress is applied to it in Gpa, Final temperature is change in temperature to your substance's original temperature to find its final heat & Initial Temperature is the measure of hotness or coldness of a system at its initial state.

How to calculate Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe?

The Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe is defined as the relative expansion of the steel pipe divided by the change in temperature for that pipe section is calculated using Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*(Final Temperature-Initial Temperature)). To calculate Coefficient of Thermal Expansion using Initial and Final Temperature of water pipe, you need Thermal Stress (σ_t), Modulus of Elasticity in Gpa (E_gpa), Final Temperature (T_f) & Initial Temperature (t_i). With our tool, you need to enter the respective value for Thermal Stress, Modulus of Elasticity in Gpa, Final Temperature & Initial Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Coefficient of Thermal Expansion?

In this formula, Coefficient of Thermal Expansion uses Thermal Stress, Modulus of Elasticity in Gpa, Final Temperature & Initial Temperature. We can use 1 other way(s) to calculate the same, which is/are as follows -

Coefficient of Thermal Expansion = Thermal Stress/(Modulus of Elasticity in Gpa*Change in Temperature)

Home

FREE PDFs

🔍 Search