Constant for Particular Shaft for Torsion Dynamometer Calculator

✖Modulus of rigidity is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is.ⓘ Modulus of Rigidity [G]			+10% -10%
✖Polar Moment of Inertia of Shaft is the measure of object resistance to torsion.ⓘ Polar Moment of Inertia of Shaft [J]			+10% -10%
✖Shaft Length is the distance between two ends of shaft.ⓘ Shaft Length [L_shaft]			+10% -10%

✖Constant for a particular shaft is the value that stays constant for a particular shaft.ⓘ Constant for Particular Shaft for Torsion Dynamometer [k]

⎘ Copy

👎

Formula

✖

Constant for Particular Shaft for Torsion Dynamometer

Formula

`"k" = ("G"*"J")/"L"_{"shaft"}`

Example

`"1095.238"=("40N/m²"*"11.5m⁴")/"0.42m"`

Calculator

LaTeX

Reset

👍

Download Dynamometer Formulas PDF

Constant for Particular Shaft for Torsion Dynamometer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length
k = (G*J)/L_shaft
This formula uses 4 Variables

Variables Used

Constant for a Particular Shaft - Constant for a particular shaft is the value that stays constant for a particular shaft.
Modulus of Rigidity - (Measured in Pascal) - Modulus of rigidity is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is.
Polar Moment of Inertia of Shaft - (Measured in Meter⁴) - Polar Moment of Inertia of Shaft is the measure of object resistance to torsion.
Shaft Length - (Measured in Meter) - Shaft Length is the distance between two ends of shaft.

STEP 1: Convert Input(s) to Base Unit

Modulus of Rigidity: 40 Newton per Square Meter --> 40 Pascal (Check conversion here)
Polar Moment of Inertia of Shaft: 11.5 Meter⁴ --> 11.5 Meter⁴ No Conversion Required
Shaft Length: 0.42 Meter --> 0.42 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

k = (G*J)/L_shaft --> (40*11.5)/0.42

Evaluating ... ...

k = 1095.2380952381

STEP 3: Convert Result to Output's Unit

1095.2380952381 --> No Conversion Required

FINAL ANSWER

1095.2380952381 ≈ 1095.238 <-- Constant for a Particular Shaft

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Dynamometer » Constant for Particular Shaft for Torsion Dynamometer

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 8 Dynamometer Calculators

Tension in Slack Side of Belt for Belt Transmission Dynamometer

Go Tension in Slack Side of Belt = Tension in Tight Side of Belt-(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame)

Tension in Tight Side of Belt for Belt Transmission Dynamometer

Go Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame)

Tangential Effort for Epicyclic-Train Dynamometer

Go Tangential Effort = (Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Center of Gear and Pinion)

Torsion Equation for Torsion Dynamometer using Modulus of Rigidity

Go Total Torque = (Modulus of Rigidity*Angle of Twist*Polar Moment of Inertia of Shaft)/Shaft Length

Constant for Particular Shaft for Torsion Dynamometer

Go Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length

Distance Moved in One Revolution by Rope Brake Dynamometer

Go Distance Moved = pi*(Diameter of Wheel+Diameter of Rope)

Torsion Equation for Torsion Dynamometer

Go Total Torque = Constant for a Particular Shaft*Angle of Twist

Load on Brake for Rope Brake Dynamometer

Go Load Applied = Dead Load-Spring Balance Reading

Constant for Particular Shaft for Torsion Dynamometer Formula

Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length
k = (G*J)/L_shaft

What is torsion bar dynamometer?

Torsion dynamometers are machine components that are usually installed between the motor and driven machine or between the generator and prime mover. They transfer power while measuring torque. Torsion dynamometers measure torque by measuring the torsion angle of a specific.

How to Calculate Constant for Particular Shaft for Torsion Dynamometer?

Constant for Particular Shaft for Torsion Dynamometer calculator uses Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length to calculate the Constant for a Particular Shaft, The Constant for particular shaft for torsion dynamometer formula is defined as the product of modulus of rigidity and polar moment of inertia divided by the length of the shaft. Constant for a Particular Shaft is denoted by k symbol.

How to calculate Constant for Particular Shaft for Torsion Dynamometer using this online calculator? To use this online calculator for Constant for Particular Shaft for Torsion Dynamometer, enter Modulus of Rigidity (G), Polar Moment of Inertia of Shaft (J) & Shaft Length (L_shaft) and hit the calculate button. Here is how the Constant for Particular Shaft for Torsion Dynamometer calculation can be explained with given input values -> 1095.238 = (40*11.5)/0.42.

FAQ

What is Constant for Particular Shaft for Torsion Dynamometer?

The Constant for particular shaft for torsion dynamometer formula is defined as the product of modulus of rigidity and polar moment of inertia divided by the length of the shaft and is represented as k = (G*J)/L_shaft or Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length. Modulus of rigidity is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is, Polar Moment of Inertia of Shaft is the measure of object resistance to torsion & Shaft Length is the distance between two ends of shaft.

How to calculate Constant for Particular Shaft for Torsion Dynamometer?

The Constant for particular shaft for torsion dynamometer formula is defined as the product of modulus of rigidity and polar moment of inertia divided by the length of the shaft is calculated using Constant for a Particular Shaft = (Modulus of Rigidity*Polar Moment of Inertia of Shaft)/Shaft Length. To calculate Constant for Particular Shaft for Torsion Dynamometer, you need Modulus of Rigidity (G), Polar Moment of Inertia of Shaft (J) & Shaft Length (L_shaft). With our tool, you need to enter the respective value for Modulus of Rigidity, Polar Moment of Inertia of Shaft & Shaft Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search