Constant using Line Losses (Single-Phase Two-Wire OS) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2)
K = (4*ρ*(P*L)^2)/(Ploss*(Vm)^2)
This formula uses 6 Variables
Variables Used
Constant Overhead AC - Constant Overhead AC is defined as the constant of line of a Overhead supply system.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Length of Overhead AC Wire - (Measured in Meter) - Length of Overhead AC Wire is the total length of the wire from one end to other end.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead AC line when in use.
Maximum Voltage Overhead AC - (Measured in Volt) - Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
STEP 1: Convert Input(s) to Base Unit
Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Power Transmitted: 890 Watt --> 890 Watt No Conversion Required
Length of Overhead AC Wire: 10.63 Meter --> 10.63 Meter No Conversion Required
Line Losses: 8.23 Watt --> 8.23 Watt No Conversion Required
Maximum Voltage Overhead AC: 62 Volt --> 62 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
K = (4*ρ*(P*L)^2)/(Ploss*(Vm)^2) --> (4*1.7E-05*(890*10.63)^2)/(8.23*(62)^2)
Evaluating ... ...
K = 0.192385457676858
STEP 3: Convert Result to Output's Unit
0.192385457676858 --> No Conversion Required
FINAL ANSWER
0.192385457676858 0.192385 <-- Constant Overhead AC
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

15 Wire Parameters Calculators

Line Losses using Area of X-Section(Single-Phase Two-Wire OS)
Go Line Losses = (4*Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*((cos(Phase Difference))^2))
Length of Wire using Area of X-Section(Single-Phase Two-Wire OS)
Go Length of Overhead AC Wire = (Area of Overhead AC Wire*Maximum Voltage Overhead AC^2*Line Losses*cos(Phase Difference)^2)/(4*Resistivity*(Power Transmitted^2))
Length using Line Losses (Single-Phase Two-Wire OS)
Go Length of Overhead AC Wire = (Line Losses*Area of Overhead AC Wire*(Maximum Voltage Overhead AC*cos(Phase Difference))^2)/(4*(Power Transmitted^2)*Resistivity)
Area of X-Section using Line Losses (Single-Phase Two-Wire OS)
Go Area of Overhead AC Wire = (4*Resistivity*Length of Overhead AC Wire*Power Transmitted^2)/(Line Losses*(Maximum Voltage Overhead AC*cos(Phase Difference))^2)
Area of X-Section(Single-Phase Two-Wire OS)
Go Area of Overhead AC Wire = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(((cos(Phase Difference))^2)*Line Losses*(Voltage Overhead AC^2))
Volume of Conductor Material using Line Losses (Single-Phase Two-Wire OS)
Go Volume of Conductor = (8*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC*cos(Phase Difference))^2)
Constant using Load Current (Single-Phase Two-Wire OS)
Go Constant Overhead AC = (2*Current Overhead AC^2*cos(Phase Difference)^2*Resistivity*Length of Overhead AC Wire^2)/Line Losses
Constant using Line Losses (Single-Phase Two-Wire OS)
Go Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2)
Constant(Single-Phase Two-Wire OS)
Go Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))
Length using Load Current (Single-Phase Two-Wire OS)
Go Length of Overhead AC Wire = (Line Losses*Area of Overhead AC Wire)/(2*(Current Overhead AC)^2*Resistivity)
Volume of Conductor Material using Load Current (Single-Phase Two-Wire OS)
Go Volume of Conductor = (4*(Current Overhead AC^2)*Resistivity*(Length of Overhead AC Wire^2))/(Line Losses)
Area of X-Section using Load Current (Single-Phase Two-Wire OS)
Go Area of Overhead AC Wire = (2*Current Overhead AC^2*Resistivity*Length of Overhead AC Wire)/(Line Losses)
Volume of Conductor Material(Single-Phase Two-Wire OS)
Go Volume of Conductor = 2*Area of Overhead AC Wire*Length of Overhead AC Wire
Line Losses(Single-Phase Two-Wire OS)
Go Line Losses = (2)*((Current Overhead AC)^2)*Resistance Overhead AC
Line Losses using Load Current (Single-Phase Two-Wire OS)
Go Line Losses = 2*Resistance Overhead AC*(Current Overhead AC)^2

Constant using Line Losses (Single-Phase Two-Wire OS) Formula

Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2)
K = (4*ρ*(P*L)^2)/(Ploss*(Vm)^2)

What is the value of maximum voltage and volume of conductor material in 1-phase 2-wire system?

The volume of conductor material required in this system is 2/cos2θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is vm so that r.m.s. value of voltage between them is vm/√2.

How to Calculate Constant using Line Losses (Single-Phase Two-Wire OS)?

Constant using Line Losses (Single-Phase Two-Wire OS) calculator uses Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2) to calculate the Constant Overhead AC, Constant using Line Losses (single-Phase two-Wire OS) formula is defined as the total constant of a single-phase two-wire overhead system. it is represented by K. Constant Overhead AC is denoted by K symbol.

How to calculate Constant using Line Losses (Single-Phase Two-Wire OS) using this online calculator? To use this online calculator for Constant using Line Losses (Single-Phase Two-Wire OS), enter Resistivity (ρ), Power Transmitted (P), Length of Overhead AC Wire (L), Line Losses (Ploss) & Maximum Voltage Overhead AC (Vm) and hit the calculate button. Here is how the Constant using Line Losses (Single-Phase Two-Wire OS) calculation can be explained with given input values -> 0.192385 = (4*1.7E-05*(890*10.63)^2)/(8.23*(62)^2).

FAQ

What is Constant using Line Losses (Single-Phase Two-Wire OS)?
Constant using Line Losses (single-Phase two-Wire OS) formula is defined as the total constant of a single-phase two-wire overhead system. it is represented by K and is represented as K = (4*ρ*(P*L)^2)/(Ploss*(Vm)^2) or Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2). Resistivity is the measure of how strongly a material opposes the flow of current through them, Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end, Length of Overhead AC Wire is the total length of the wire from one end to other end, Line Losses is defined as the total losses occurring in an Overhead AC line when in use & Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
How to calculate Constant using Line Losses (Single-Phase Two-Wire OS)?
Constant using Line Losses (single-Phase two-Wire OS) formula is defined as the total constant of a single-phase two-wire overhead system. it is represented by K is calculated using Constant Overhead AC = (4*Resistivity*(Power Transmitted*Length of Overhead AC Wire)^2)/(Line Losses*(Maximum Voltage Overhead AC)^2). To calculate Constant using Line Losses (Single-Phase Two-Wire OS), you need Resistivity (ρ), Power Transmitted (P), Length of Overhead AC Wire (L), Line Losses (Ploss) & Maximum Voltage Overhead AC (Vm). With our tool, you need to enter the respective value for Resistivity, Power Transmitted, Length of Overhead AC Wire, Line Losses & Maximum Voltage Overhead AC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Constant Overhead AC?
In this formula, Constant Overhead AC uses Resistivity, Power Transmitted, Length of Overhead AC Wire, Line Losses & Maximum Voltage Overhead AC. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Constant Overhead AC = (4*(Power Transmitted^2)*Resistivity*Length of Overhead AC Wire)/(Line Losses*(Voltage Overhead AC^2))
  • Constant Overhead AC = (2*Current Overhead AC^2*cos(Phase Difference)^2*Resistivity*Length of Overhead AC Wire^2)/Line Losses
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!