Correction to Second Bearing for given Closing Error Solution

STEP 0: Pre-Calculation Summary
Formula Used
Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180)
cn2 = (2*e/NSides)*(pi/180)
This formula uses 1 Constants, 3 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Correction to Second Bearing - (Measured in Radian) - Correction to Second Bearing is the correction done against the second bearing measured during traverse.
Closing Error - (Measured in Meter) - Closing Error is the error formed during traverse surveying.
Number of Sides - The number of sides is used to classify the polygons.
STEP 1: Convert Input(s) to Base Unit
Closing Error: 50 Meter --> 50 Meter No Conversion Required
Number of Sides: 2 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
cn2 = (2*e/NSides)*(pi/180) --> (2*50/2)*(pi/180)
Evaluating ... ...
cn2 = 0.872664625997165
STEP 3: Convert Result to Output's Unit
0.872664625997165 Radian -->50.0000000000094 Degree (Check conversion here)
FINAL ANSWER
50.0000000000094 50 Degree <-- Correction to Second Bearing
(Calculation completed in 00.004 seconds)

Credits

Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

12 Traversing Calculators

Total Error in Latitude if Correction is Known from Bowditch Rule
Go Error in Latitude = Correction to Latitude*Perimeter of Traverse/Latitude of Line
Correction to Latitude by Bowditch Rule
Go Correction to Latitude = Error in Latitude*Latitude of Line/Perimeter of Traverse
Correction of Latitude by Transit Rule
Go Correction to Latitude = Error in Latitude*Latitude of Line/Sum of Latitudes
Correction to Second Bearing for given Closing Error
Go Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180)
Correction to First Bearing for given Closing Error
Go Correction to First Bearing = (Closing Error/Number of Sides)*(pi/180)
Correction to Northing in Transit Rule
Go Closing Error = 0.5*Error in Latitude*Northing/Sum of Northings
Sum of Departures given Closing Error
Go Sum of Departures = sqrt(Closing Error^2-Sum of Latitudes^2)
Sum of Latitudes given Closing Error
Go Sum of Latitudes = sqrt(Closing Error^2-Sum of Departures^2)
Closing Error in Traversing
Go Closing Error = sqrt(Sum of Latitudes^2+Sum of Departures^2)
Sum of Latitudes given Direction of Closing Error
Go Sum of Latitudes = Sum of Departures/Direction of Closing Error
Sum of Departure given Direction of Closing Error
Go Sum of Departures = Direction of Closing Error*Sum of Latitudes
Direction of Closing Error in Traversing
Go Direction of Closing Error = Sum of Departures/Sum of Latitudes

Correction to Second Bearing for given Closing Error Formula

Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180)
cn2 = (2*e/NSides)*(pi/180)

Why is it Important to calculate the Correction to Second Bearing?

It is important to calculate the Correction to Second Bearing in order to ensure the accuracy of the surveying measurements and to correct for any errors that may have been made in the previous bearings. By making the necessary adjustments, the final computed position of the point will be closer to its true position, resulting in a more accurate survey.

How to Calculate Correction to Second Bearing for given Closing Error?

Correction to Second Bearing for given Closing Error calculator uses Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180) to calculate the Correction to Second Bearing, Correction to Second Bearing for given Closing Error is defined as the improvement given to the second bearing measured. This can be used for third bearing, when multiplied by 3. Similarly for last bearing it will be (n*e/n) and hence error itself. Correction to Second Bearing is denoted by cn2 symbol.

How to calculate Correction to Second Bearing for given Closing Error using this online calculator? To use this online calculator for Correction to Second Bearing for given Closing Error, enter Closing Error (e) & Number of Sides (NSides) and hit the calculate button. Here is how the Correction to Second Bearing for given Closing Error calculation can be explained with given input values -> 2864.789 = (2*50/2)*(pi/180).

FAQ

What is Correction to Second Bearing for given Closing Error?
Correction to Second Bearing for given Closing Error is defined as the improvement given to the second bearing measured. This can be used for third bearing, when multiplied by 3. Similarly for last bearing it will be (n*e/n) and hence error itself and is represented as cn2 = (2*e/NSides)*(pi/180) or Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180). Closing Error is the error formed during traverse surveying & The number of sides is used to classify the polygons.
How to calculate Correction to Second Bearing for given Closing Error?
Correction to Second Bearing for given Closing Error is defined as the improvement given to the second bearing measured. This can be used for third bearing, when multiplied by 3. Similarly for last bearing it will be (n*e/n) and hence error itself is calculated using Correction to Second Bearing = (2*Closing Error/Number of Sides)*(pi/180). To calculate Correction to Second Bearing for given Closing Error, you need Closing Error (e) & Number of Sides (NSides). With our tool, you need to enter the respective value for Closing Error & Number of Sides and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!