Depression Head given Discharge Calculator

✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%
✖Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area [A_cs]			+10% -10%
✖Percolation intensity coefficient is the constant of the formation around the well.ⓘ Percolation intensity coefficient [C]			+10% -10%

✖Depression Head is the height of the bottom of a well above the datum.ⓘ Depression Head given Discharge [H]

⎘ Copy

👎

Formula

✖

Depression Head given Discharge

Formula

`"H" = ("Q"/("A"_{"cs"}*"C"))`

Example

`"7.769231m"=("1.01m³/s"/("13m²"*"0.01m/s"))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Depression Head given Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient))
H = (Q/(A_cs*C))
This formula uses 4 Variables

Variables Used

Depression Head - (Measured in Meter) - Depression Head is the height of the bottom of a well above the datum.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Cross-Sectional Area - (Measured in Square Meter) - Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Percolation intensity coefficient - (Measured in Meter per Second) - Percolation intensity coefficient is the constant of the formation around the well.

STEP 1: Convert Input(s) to Base Unit

Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Cross-Sectional Area: 13 Square Meter --> 13 Square Meter No Conversion Required
Percolation intensity coefficient: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = (Q/(A_cs*C)) --> (1.01/(13*0.01))

Evaluating ... ...

H = 7.76923076923077

STEP 3: Convert Result to Output's Unit

7.76923076923077 Meter --> No Conversion Required

FINAL ANSWER

7.76923076923077 ≈ 7.769231 Meter <-- Depression Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources : Ground Water » Yield of an Open Well » Constant Level Pumping Test » Depression Head » Depression Head given Discharge

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 5 Depression Head Calculators

Depression Head given Discharge

Go Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient))

Constant Depression Head given Specific Capacity

Go Constant Depression Head = Discharge/(Cross-Sectional Area*Specific Capacity)

Constant Depression Head given Specific Capacity for Clay Soil

Go Constant Depression Head for Clay Soil = Discharge/(Cross-Sectional Area*0.25)

Constant Depression Head given Specific Capacity for Coarse Sand

Go Constant Depression Head for Coarse Sand = Discharge/(Cross-Sectional Area*1)

Constant Depression Head given Specific Capacity for Fine Sand

Go Constant Depression Head for Fine Soil = Discharge/(Cross-Sectional Area*0.5)

Depression Head given Discharge Formula

Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient))
H = (Q/(A_cs*C))

What is discharge ?

The amount of fluid passing a section of a stream in unit time is called the discharge. If v is the mean velocity and A is the cross sectional area, the discharge Q is defined by Q = Av which is known as volume flow rate.

How to Calculate Depression Head given Discharge?

Depression Head given Discharge calculator uses Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient)) to calculate the Depression Head, Depression Head given Discharge calculates value of depression head when we have prior information of other parameters used. Depression Head is denoted by H symbol.

How to calculate Depression Head given Discharge using this online calculator? To use this online calculator for Depression Head given Discharge, enter Discharge (Q), Cross-Sectional Area (A_cs) & Percolation intensity coefficient (C) and hit the calculate button. Here is how the Depression Head given Discharge calculation can be explained with given input values -> 7.692308 = (discharge/(13*0.01)).

FAQ

What is Depression Head given Discharge?

Depression Head given Discharge calculates value of depression head when we have prior information of other parameters used and is represented as H = (Q/(A_cs*C)) or Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient)). Discharge is the rate of flow of a liquid, Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Percolation intensity coefficient is the constant of the formation around the well.

How to calculate Depression Head given Discharge?

Depression Head given Discharge calculates value of depression head when we have prior information of other parameters used is calculated using Depression Head = (Discharge/(Cross-Sectional Area*Percolation intensity coefficient)). To calculate Depression Head given Discharge, you need Discharge (Q), Cross-Sectional Area (A_cs) & Percolation intensity coefficient (C). With our tool, you need to enter the respective value for Discharge, Cross-Sectional Area & Percolation intensity coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search