Depth of Flow given Section Factor for Triangle Channel Calculator

✖Section Factor of Triangular Channel is ratio of normal to critical channel depth.ⓘ Section Factor of Triangular Channel [Z_Δ]			+10% -10%
✖Side Slope of Triangular Channel is how far a channel drops over a horizontal distance.ⓘ Side Slope of Triangular Channel [z_Tri]			+10% -10%

✖Depth of Flow of Triangle Channel is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.ⓘ Depth of Flow given Section Factor for Triangle Channel [d_f(Δ)]

⎘ Copy

👎

Formula

✖

Depth of Flow given Section Factor for Triangle Channel

Formula

`"d"_{"f(Δ)"} = ("Z"_{"Δ"}*sqrt(2)/"z"_{"Tri"})^(2/5)`

Example

`"3.314386m"=("14m^2.5"*sqrt(2)/"0.99")^(2/5)`

Calculator

LaTeX

Reset

👍

Download Geometrical Properties of Triangular Channel Section Formulas PDF

Depth of Flow given Section Factor for Triangle Channel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5)
d_f(Δ) = (Z_Δ*sqrt(2)/z_Tri)^(2/5)
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Depth of Flow of Triangle Channel - (Measured in Meter) - Depth of Flow of Triangle Channel is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.
Section Factor of Triangular Channel - (Measured in Meter^2.5) - Section Factor of Triangular Channel is ratio of normal to critical channel depth.
Side Slope of Triangular Channel - Side Slope of Triangular Channel is how far a channel drops over a horizontal distance.

STEP 1: Convert Input(s) to Base Unit

Section Factor of Triangular Channel: 14 Meter^2.5 --> 14 Meter^2.5 No Conversion Required
Side Slope of Triangular Channel: 0.99 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_f(Δ) = (Z_Δ*sqrt(2)/z_Tri)^(2/5) --> (14*sqrt(2)/0.99)^(2/5)

Evaluating ... ...

d_f(Δ) = 3.3143863795623

STEP 3: Convert Result to Output's Unit

3.3143863795623 Meter --> No Conversion Required

FINAL ANSWER

3.3143863795623 ≈ 3.314386 Meter <-- Depth of Flow of Triangle Channel

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Geometrical Properties of Channel Section » Geometrical Properties of Triangular Channel Section » Depth of Flow given Section Factor for Triangle Channel

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 17 Geometrical Properties of Triangular Channel Section Calculators

Side Slope of Section given Hydraulic Radius

Go Side Slope of Triangular Channel = sqrt((4*(Hydraulic Radius of Triangular Channel^2))/((Depth of Flow of Triangle Channel^2)-(4*Hydraulic Radius of Triangular Channel^2)))

Hydraulic Radius of Flow

Go Hydraulic Radius of Triangular Channel = (Depth of Flow of Triangle Channel*Side Slope of Triangular Channel)/(2*sqrt(Side Slope of Triangular Channel^2+1))

Depth of Flow given Hydraulic Radius for Triangle

Go Depth of Flow of Triangle Channel = Hydraulic Radius of Triangular Channel*2*(sqrt(Side Slope of Triangular Channel^2+1))/Side Slope of Triangular Channel

Wetted Perimeter for Triangular Section

Go Wetted Perimeter of Triangular Channel = 2*Depth of Flow of Triangle Channel*(sqrt(Side Slope of Triangular Channel*Side Slope of Triangular Channel+1))

Side Slope of Section given Wetted Area

Go Side Slope of Triangular Channel = Wetted Surface Area of Triangular Channel/(Depth of Flow of Triangle Channel*Depth of Flow of Triangle Channel)

Depth of Flow for Wetted Perimeter for Triangle

Go Depth of Flow of Triangle Channel = (Wetted Perimeter of Triangular Channel)/(2*(sqrt(Side Slope of Triangular Channel^2+1)))

Side Slope of Section given Wetted Perimeters

Go Side Slope of Triangular Channel = sqrt(((Wetted Perimeter of Triangular Channel/(2*Depth of Flow of Triangle Channel))^2)-1)

Side Slope of Section given Section Factor

Go Side Slope of Triangular Channel = Section Factor of Triangular Channel/(((Depth of Flow of Triangle Channel^2.5))/sqrt(2))

Depth of Flow given Section Factor for Triangle Channel

Go Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5)

Section Factor for Triangle

Go Section Factor of Triangular Channel = (Side Slope of Triangular Channel*(Depth of Flow of Triangle Channel^2.5))/sqrt(2)

Depth of Flow given Wetted Area for Triangle

Go Depth of Flow of Triangle Channel = sqrt(Wetted Surface Area of Triangular Channel/Side Slope of Triangular Channel)

Wetted Area for Triangular

Go Wetted Surface Area of Triangular Channel = Side Slope of Triangular Channel*Depth of Flow of Triangle Channel^2

Side Slope of Section given Top Width for Triangle

Go Side Slope of Triangular Channel = Top Width of Triangular Channel/(2*Depth of Flow of Triangle Channel)

Depth of Flow given Top Width for Triangle

Go Depth of Flow of Triangle Channel = Top Width of Triangular Channel/(2*Side Slope of Triangular Channel)

Top Width for Triangle

Go Top Width of Triangular Channel = 2*Depth of Flow of Triangle Channel*Side Slope of Triangular Channel

Hydraulic Depth for Triangle

Go Hydraulic Depth of Triangular Channel = 0.5*Depth of Flow of Triangle Channel

Depth of Flow given Hydraulic Depth for Triangle

Go Depth of Flow of Triangle Channel = Hydraulic Depth of Triangular Channel*2

Depth of Flow given Section Factor for Triangle Channel Formula

Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5)
d_f(Δ) = (Z_Δ*sqrt(2)/z_Tri)^(2/5)

What is Depth of Flow?

Normal depth is the depth of flow in a channel or culvert when the slope of the water surface and channel bottom is the same and the water depth remains constant. Note: Flow at normal depth in culverts often presents the highest average velocities and shallowest depths at that flow.

How to Calculate Depth of Flow given Section Factor for Triangle Channel?

Depth of Flow given Section Factor for Triangle Channel calculator uses Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5) to calculate the Depth of Flow of Triangle Channel, The Depth of Flow given Section Factor for Triangle Channel formula is defined as the amount of water in channel at any section. Depth of Flow of Triangle Channel is denoted by d_f(Δ) symbol.

How to calculate Depth of Flow given Section Factor for Triangle Channel using this online calculator? To use this online calculator for Depth of Flow given Section Factor for Triangle Channel, enter Section Factor of Triangular Channel (Z_Δ) & Side Slope of Triangular Channel (z_Tri) and hit the calculate button. Here is how the Depth of Flow given Section Factor for Triangle Channel calculation can be explained with given input values -> 3.300957 = (14*sqrt(2)/0.99)^(2/5).

FAQ

What is Depth of Flow given Section Factor for Triangle Channel?

The Depth of Flow given Section Factor for Triangle Channel formula is defined as the amount of water in channel at any section and is represented as d_f(Δ) = (Z_Δ*sqrt(2)/z_Tri)^(2/5) or Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5). Section Factor of Triangular Channel is ratio of normal to critical channel depth & Side Slope of Triangular Channel is how far a channel drops over a horizontal distance.

How to calculate Depth of Flow given Section Factor for Triangle Channel?

The Depth of Flow given Section Factor for Triangle Channel formula is defined as the amount of water in channel at any section is calculated using Depth of Flow of Triangle Channel = (Section Factor of Triangular Channel*sqrt(2)/Side Slope of Triangular Channel)^(2/5). To calculate Depth of Flow given Section Factor for Triangle Channel, you need Section Factor of Triangular Channel (Z_Δ) & Side Slope of Triangular Channel (z_Tri). With our tool, you need to enter the respective value for Section Factor of Triangular Channel & Side Slope of Triangular Channel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Flow of Triangle Channel?

In this formula, Depth of Flow of Triangle Channel uses Section Factor of Triangular Channel & Side Slope of Triangular Channel. We can use 5 other way(s) to calculate the same, which is/are as follows -

Depth of Flow of Triangle Channel = sqrt(Wetted Surface Area of Triangular Channel/Side Slope of Triangular Channel)
Depth of Flow of Triangle Channel = (Wetted Perimeter of Triangular Channel)/(2*(sqrt(Side Slope of Triangular Channel^2+1)))
Depth of Flow of Triangle Channel = Hydraulic Radius of Triangular Channel*2*(sqrt(Side Slope of Triangular Channel^2+1))/Side Slope of Triangular Channel
Depth of Flow of Triangle Channel = Top Width of Triangular Channel/(2*Side Slope of Triangular Channel)
Depth of Flow of Triangle Channel = Hydraulic Depth of Triangular Channel*2

Home

FREE PDFs

🔍 Search