Discharge given Aquifer Constant Calculator

✖Aquifer Constant is also known as coefficient of transmissibility.ⓘ Aquifer Constant [T]			+10% -10%
✖Drawdown in well 1 is a peak-to-trough decline during a specific period for well 1.ⓘ Drawdown in well 1 [s₁]			+10% -10%
✖Drawdown in well 2 is a peak-to-trough decline during a specific period for well 2.ⓘ Drawdown in well 2 [s₂]			+10% -10%

✖Discharge is the rate of flow of a liquid.ⓘ Discharge given Aquifer Constant [Q]

⎘ Copy

👎

Formula

✖

Discharge given Aquifer Constant

Formula

`"Q" = "T"/((1)/(2.72*("s"_{"1"}-"s"_{"2"})))`

Example

`"0.939434m³/s"="24.67"/((1)/(2.72*("2.15m"-"2.136m")))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Discharge given Aquifer Constant Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2)))
Q = T/((1)/(2.72*(s₁-s₂)))
This formula uses 4 Variables

Variables Used

Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Aquifer Constant - Aquifer Constant is also known as coefficient of transmissibility.
Drawdown in well 1 - (Measured in Meter) - Drawdown in well 1 is a peak-to-trough decline during a specific period for well 1.
Drawdown in well 2 - (Measured in Meter) - Drawdown in well 2 is a peak-to-trough decline during a specific period for well 2.

STEP 1: Convert Input(s) to Base Unit

Aquifer Constant: 24.67 --> No Conversion Required
Drawdown in well 1: 2.15 Meter --> 2.15 Meter No Conversion Required
Drawdown in well 2: 2.136 Meter --> 2.136 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = T/((1)/(2.72*(s₁-s₂))) --> 24.67/((1)/(2.72*(2.15-2.136)))

Evaluating ... ...

Q = 0.939433599999986

STEP 3: Convert Result to Output's Unit

0.939433599999986 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

0.939433599999986 ≈ 0.939434 Cubic Meter per Second <-- Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources : Ground Water » Confined Aquifers » Discharge And Drawdown in Well » Discharge given Aquifer Constant

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 9 Discharge And Drawdown in Well Calculators

Drawdown in Well 1 given Aquifer Constant

Go Drawdown in well 1 = Drawdown in well 2+((Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(2.72*Aquifer Constant))

Drawdown in Well 2 given Aquifer Constant

Go Drawdown in well 2 = Drawdown in well 1-((Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(2.72*Aquifer Constant))

Discharge given Aquifer Constant

Go Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2)))

Drawdown in Well 1 given Aquifer Constant and Discharge

Go Drawdown in well 1 = Drawdown in well 2+((Discharge)/(2.72*Aquifer Constant))

Drawdown in Well 2 given Aquifer Constant and Discharge

Go Drawdown in well 2 = Drawdown in well 1-((Discharge)/(2.72*Aquifer Constant))

Difference in Drawdowns at Two Wells given Aquifer Constant

Go Difference in Drawdowns = (Discharge/(2.72*Aquifer Constant))

Drawdown in Well 1 given Thickness of Aquifer from Impermeable Layer

Go Drawdown in well 1 = Thickness of aquifer-Depth of Water 1

Discharge given Difference in Drawdowns at Two Wells

Go Discharge = Aquifer Constant*2.72*Difference in Drawdowns

Drawdown in Well 2 given Thickness of Aquifer from Impermeable Layer

Go Drawdown in well 2 = Width of Aquifer-Depth of Water 2

Discharge given Aquifer Constant Formula

Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2)))
Q = T/((1)/(2.72*(s₁-s₂)))

What is Discharge?

The amount of fluid passing a section of a stream in unit time is called the discharge. If v is the mean velocity and A is the cross sectional area, the discharge Q is defined by Q = Av which is known as volume flow rate.

How to Calculate Discharge given Aquifer Constant?

Discharge given Aquifer Constant calculator uses Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2))) to calculate the Discharge, The Discharge given Aquifer Constant is defined as the value of discharge when we have prior information of other parameters used. Discharge is denoted by Q symbol.

How to calculate Discharge given Aquifer Constant using this online calculator? To use this online calculator for Discharge given Aquifer Constant, enter Aquifer Constant (T), Drawdown in well 1 (s₁) & Drawdown in well 2 (s₂) and hit the calculate button. Here is how the Discharge given Aquifer Constant calculation can be explained with given input values -> 3.35512 = 24.67/((1)/(2.72*(2.15-2.136))).

FAQ

What is Discharge given Aquifer Constant?

The Discharge given Aquifer Constant is defined as the value of discharge when we have prior information of other parameters used and is represented as Q = T/((1)/(2.72*(s₁-s₂))) or Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2))). Aquifer Constant is also known as coefficient of transmissibility, Drawdown in well 1 is a peak-to-trough decline during a specific period for well 1 & Drawdown in well 2 is a peak-to-trough decline during a specific period for well 2.

How to calculate Discharge given Aquifer Constant?

The Discharge given Aquifer Constant is defined as the value of discharge when we have prior information of other parameters used is calculated using Discharge = Aquifer Constant/((1)/(2.72*(Drawdown in well 1-Drawdown in well 2))). To calculate Discharge given Aquifer Constant, you need Aquifer Constant (T), Drawdown in well 1 (s₁) & Drawdown in well 2 (s₂). With our tool, you need to enter the respective value for Aquifer Constant, Drawdown in well 1 & Drawdown in well 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge?

In this formula, Discharge uses Aquifer Constant, Drawdown in well 1 & Drawdown in well 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Discharge = Aquifer Constant*2.72*Difference in Drawdowns

Home

FREE PDFs

🔍 Search