Dosage Used given Capacity of Chlorinator at Peak Flow Calculator

✖Chlorine required means pounds of chlorine required per day.ⓘ Chlorine required [Cl₂]			+10% -10%
✖Peaking factor is the ratio of the maximum flow to the average daily flow in a water system.ⓘ Peaking factor [f]			+10% -10%
✖Average flow is measured in terms of discharge.ⓘ Average flow [Q_a]			+10% -10%

✖Dosage used to obtain coliform reduction.ⓘ Dosage Used given Capacity of Chlorinator at Peak Flow [D]

⎘ Copy

👎

Formula

✖

Dosage Used given Capacity of Chlorinator at Peak Flow

Formula

`"D" = ("Cl"_{"2"}/("f"*"Q"_{"a"}*8.34))`

Example

`"0.002313mg/L"=("10kg/d"/("2"*"3m³/s"*8.34))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Dosage Used given Capacity of Chlorinator at Peak Flow Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dosage = (Chlorine required/(Peaking factor*Average flow*8.34))
D = (Cl₂/(f*Q_a*8.34))
This formula uses 4 Variables

Variables Used

Dosage - (Measured in Kilogram per Cubic Meter) - Dosage used to obtain coliform reduction.
Chlorine required - (Measured in Kilogram per Second) - Chlorine required means pounds of chlorine required per day.
Peaking factor - Peaking factor is the ratio of the maximum flow to the average daily flow in a water system.
Average flow - (Measured in Cubic Meter per Second) - Average flow is measured in terms of discharge.

STEP 1: Convert Input(s) to Base Unit

Chlorine required: 10 Kilogram per Day --> 0.000115740740740741 Kilogram per Second (Check conversion here)
Peaking factor: 2 --> No Conversion Required
Average flow: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D = (Cl₂/(f*Q_a*8.34)) --> (0.000115740740740741/(2*3*8.34))

Evaluating ... ...

D = 2.31296444326021E-06

STEP 3: Convert Result to Output's Unit

2.31296444326021E-06 Kilogram per Cubic Meter -->0.00231296444326021 Milligram per Liter (Check conversion here)

FINAL ANSWER

0.00231296444326021 ≈ 0.002313 Milligram per Liter <-- Dosage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Chlorination System for Wastewater Disinfection » Dosage Used given Capacity of Chlorinator at Peak Flow

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 11 Design of a Chlorination System for Wastewater Disinfection Calculators

Residence Time given Number of Coliform Organisms at Any Particular Time

Go Residence time = ((Number of Coliform/Number of coliform)^(1/3)-1)/(0.23*Chlorine residual)

Total Chlorine Residual at Any Particular Time

Go Chlorine residual = ((Number of Coliform/Number of coliform)^(1/3)-1)/(0.23*Residence time)

Number of Coliform Organisms at Any Initial Time

Go Number of Coliform = (Number of coliform/(1+0.23*Chlorine residual*Residence time)^(-3))

Number of Coliform Organisms at Any Particular Time

Go Number of coliform = Number of Coliform*(1+0.23*Chlorine residual*Residence time)^(-3)

Peaking Factor given Capacity of Chlorinator at Peak Flow

Go Peaking factor = (Chlorine required/(Average flow*8.34*Dosage))

Average Flow given Capacity of Chlorinator at Peak Flow

Go Average flow = (Chlorine required/(Dosage*Peaking factor*8.34))

Dosage Used given Capacity of Chlorinator at Peak Flow

Go Dosage = (Chlorine required/(Peaking factor*Average flow*8.34))

Capacity of Chlorinator at Peak Flow

Go Chlorine required = Dosage*Average flow*8.34*Peaking factor

Average Flow given Average Daily Consumption of Chlorine

Go Average flow = (Chlorine required/(Dosage*8.34))

Dosage Used given Average Daily Consumption of Chlorine

Go Dosage = (Chlorine required/(8.34*Average flow))

Average Daily Consumption of Chlorine

Go Chlorine required = Dosage*Average flow*8.34

Dosage Used given Capacity of Chlorinator at Peak Flow Formula

Dosage = (Chlorine required/(Peaking factor*Average flow*8.34))
D = (Cl₂/(f*Q_a*8.34))

What is coliform ?

Coliform bacteria are defined as Rod shaped Gram-negative non-spore forming and motile or non-motile bacteria which can ferment lactose with the production of acid and gas when incubated at 35–37°C.

How to Calculate Dosage Used given Capacity of Chlorinator at Peak Flow?

Dosage Used given Capacity of Chlorinator at Peak Flow calculator uses Dosage = (Chlorine required/(Peaking factor*Average flow*8.34)) to calculate the Dosage, The Dosage Used given Capacity of Chlorinator at Peak Flow calculates the dosage used when we have prior information of chlorine required , average flow and peaking factor . Dosage is denoted by D symbol.

How to calculate Dosage Used given Capacity of Chlorinator at Peak Flow using this online calculator? To use this online calculator for Dosage Used given Capacity of Chlorinator at Peak Flow, enter Chlorine required (Cl₂), Peaking factor (f) & Average flow (Q_a) and hit the calculate button. Here is how the Dosage Used given Capacity of Chlorinator at Peak Flow calculation can be explained with given input values -> 2.312964 = (0.000115740740740741/(2*3*8.34)).

FAQ

What is Dosage Used given Capacity of Chlorinator at Peak Flow?

The Dosage Used given Capacity of Chlorinator at Peak Flow calculates the dosage used when we have prior information of chlorine required , average flow and peaking factor and is represented as D = (Cl₂/(f*Q_a*8.34)) or Dosage = (Chlorine required/(Peaking factor*Average flow*8.34)). Chlorine required means pounds of chlorine required per day, Peaking factor is the ratio of the maximum flow to the average daily flow in a water system & Average flow is measured in terms of discharge.

How to calculate Dosage Used given Capacity of Chlorinator at Peak Flow?

The Dosage Used given Capacity of Chlorinator at Peak Flow calculates the dosage used when we have prior information of chlorine required , average flow and peaking factor is calculated using Dosage = (Chlorine required/(Peaking factor*Average flow*8.34)). To calculate Dosage Used given Capacity of Chlorinator at Peak Flow, you need Chlorine required (Cl₂), Peaking factor (f) & Average flow (Q_a). With our tool, you need to enter the respective value for Chlorine required, Peaking factor & Average flow and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dosage?

In this formula, Dosage uses Chlorine required, Peaking factor & Average flow. We can use 1 other way(s) to calculate the same, which is/are as follows -

Dosage = (Chlorine required/(8.34*Average flow))

Home

FREE PDFs

🔍 Search