Drawdown at Well given Radius of Influence Calculator

✖Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.ⓘ Radius of Influence [R_w]			+10% -10%
✖Coefficient of Permeability at Drawdown is the velocity in meters or centimeters per second of water through soils during drawdown at well.ⓘ Coefficient of Permeability at Drawdown [K_dw]			+10% -10%

✖The Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Drawdown at Well given Radius of Influence [s_t]

⎘ Copy

👎

Formula

✖

Drawdown at Well given Radius of Influence

Formula

`"s"_{"t"} = "R"_{"w"}/(3000*sqrt("K"_{"dw"}))`

Example

`"0.90652m"="8.6m"/(3000*sqrt("0.00001cm/s"))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Drawdown at Well given Radius of Influence Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown))
s_t = R_w/(3000*sqrt(K_dw))
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Total Drawdown in Well - (Measured in Meter) - The Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.
Radius of Influence - (Measured in Meter) - Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.
Coefficient of Permeability at Drawdown - (Measured in Centimeter per Second) - Coefficient of Permeability at Drawdown is the velocity in meters or centimeters per second of water through soils during drawdown at well.

STEP 1: Convert Input(s) to Base Unit

Radius of Influence: 8.6 Meter --> 8.6 Meter No Conversion Required
Coefficient of Permeability at Drawdown: 1E-05 Centimeter per Second --> 1E-05 Centimeter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s_t = R_w/(3000*sqrt(K_dw)) --> 8.6/(3000*sqrt(1E-05))

Evaluating ... ...

s_t = 0.906519595914935

STEP 3: Convert Result to Output's Unit

0.906519595914935 Meter --> No Conversion Required

FINAL ANSWER

0.906519595914935 ≈ 0.90652 Meter <-- Total Drawdown in Well

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources : Ground Water » Well Hydraulics » Unconfined Aquifer » Drawdown at well » Drawdown at Well given Radius of Influence

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 1 Drawdown at well Calculators

Drawdown at Well given Radius of Influence

Go Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown))

Drawdown at Well given Radius of Influence Formula

Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown))
s_t = R_w/(3000*sqrt(K_dw))

What is Radius of Influence?

The “Radius of Influence” is defined as the maximum distance at which the drawdowns can be detected with the usual measure devices in the field.

How to Calculate Drawdown at Well given Radius of Influence?

Drawdown at Well given Radius of Influence calculator uses Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown)) to calculate the Total Drawdown in Well, The Drawdown at Well given Radius of Influence is defined as the value of draw down at well when we have prior information of other parameters used. Total Drawdown in Well is denoted by s_t symbol.

How to calculate Drawdown at Well given Radius of Influence using this online calculator? To use this online calculator for Drawdown at Well given Radius of Influence, enter Radius of Influence (R_w) & Coefficient of Permeability at Drawdown (K_dw) and hit the calculate button. Here is how the Drawdown at Well given Radius of Influence calculation can be explained with given input values -> 0.90652 = 8.6/(3000*sqrt(1E-07)).

FAQ

What is Drawdown at Well given Radius of Influence?

The Drawdown at Well given Radius of Influence is defined as the value of draw down at well when we have prior information of other parameters used and is represented as s_t = R_w/(3000*sqrt(K_dw)) or Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown)). Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table & Coefficient of Permeability at Drawdown is the velocity in meters or centimeters per second of water through soils during drawdown at well.

How to calculate Drawdown at Well given Radius of Influence?

The Drawdown at Well given Radius of Influence is defined as the value of draw down at well when we have prior information of other parameters used is calculated using Total Drawdown in Well = Radius of Influence/(3000*sqrt(Coefficient of Permeability at Drawdown)). To calculate Drawdown at Well given Radius of Influence, you need Radius of Influence (R_w) & Coefficient of Permeability at Drawdown (K_dw). With our tool, you need to enter the respective value for Radius of Influence & Coefficient of Permeability at Drawdown and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search