Energy Delivered per Spark from Resistance Charging Circuit Solution

STEP 0: Pre-Calculation Summary
Formula Used
Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant))
P = (V0^2*𝜏)/Rc*(1/2-exp(-t/𝜏)+0.5*exp(-2*t/𝜏))
This formula uses 1 Functions, 5 Variables
Functions Used
exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)
Variables Used
Energy Delivered per Spark - (Measured in Watt) - Energy delivered per spark is the energy produced for EDM.
Voltage of Power Supply - (Measured in Volt) - Voltage of power supply is the voltage required to charge a given device within given time.
Time Constant - (Measured in Second) - Time Constant of the response represents the elapsed time required for the system response to decay to zero if the system had continued to decay at the initial rate.
Resistance of the Charging Circuit - (Measured in Ohm) - Resistance of the charging circuit is the resistance of the charging circuit.
Time Elapsed - (Measured in Second) - Time elapsed after a particular task is started.
STEP 1: Convert Input(s) to Base Unit
Voltage of Power Supply: 10 Volt --> 10 Volt No Conversion Required
Time Constant: 100 Second --> 100 Second No Conversion Required
Resistance of the Charging Circuit: 0.18 Ohm --> 0.18 Ohm No Conversion Required
Time Elapsed: 12 Second --> 12 Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = (V0^2*𝜏)/Rc*(1/2-exp(-t/𝜏)+0.5*exp(-2*t/𝜏)) --> (10^2*100)/0.18*(1/2-exp(-12/100)+0.5*exp(-2*12/100))
Evaluating ... ...
P = 355.194100895514
STEP 3: Convert Result to Output's Unit
355.194100895514 Watt --> No Conversion Required
FINAL ANSWER
355.194100895514 355.1941 Watt <-- Energy Delivered per Spark
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

3 Power Delivered per Spark Calculators

Power Supply required for given Spark Power
Go Voltage of Power Supply = sqrt((Energy Delivered per Spark*Resistance of the Charging Circuit)/(Time Constant*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant))))
Energy Delivered per Spark from Resistance Charging Circuit
Go Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant))
Resistance of Charging Circuit from Voltage Supply
Go Resistance of the Charging Circuit = (Voltage of Power Supply^2*Time Constant)/Energy Delivered per Spark*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant))

Energy Delivered per Spark from Resistance Charging Circuit Formula

Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant))
P = (V0^2*𝜏)/Rc*(1/2-exp(-t/𝜏)+0.5*exp(-2*t/𝜏))

How the spark is produced in Electric Discharge Machining ?

A typical circuit used for supplying the power to an EDM machine is named as the relaxation circuit. The circuit consists of a DC power source, which charges the capacitor ‘C’ across a resistance ‘Rc’. Initially when the capacitor is in the uncharged condition, when the power supply is on with a voltage of Vo, a heavy current, ic, will flow in the circuit as shown to charge the capacitor.The relaxation circuit as explained above was used in the early EDM machines. They are limited to the low material removal rates for fine finish, which limits its application. This can be explained from the fact that the time spent on charging the capacitor is quite large during which time, no machining can actually take place. Thus the material removal rates are low.

How to Calculate Energy Delivered per Spark from Resistance Charging Circuit?

Energy Delivered per Spark from Resistance Charging Circuit calculator uses Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant)) to calculate the Energy Delivered per Spark, Energy delivered per spark from resistance charging circuit is the parameter which defines the amount of material removed and the surface finish produced. Energy Delivered per Spark is denoted by P symbol.

How to calculate Energy Delivered per Spark from Resistance Charging Circuit using this online calculator? To use this online calculator for Energy Delivered per Spark from Resistance Charging Circuit, enter Voltage of Power Supply (V0), Time Constant (𝜏), Resistance of the Charging Circuit (Rc) & Time Elapsed (t) and hit the calculate button. Here is how the Energy Delivered per Spark from Resistance Charging Circuit calculation can be explained with given input values -> 355.1941 = (10^2*100)/0.18*(1/2-exp(-12/100)+0.5*exp(-2*12/100)).

FAQ

What is Energy Delivered per Spark from Resistance Charging Circuit?
Energy delivered per spark from resistance charging circuit is the parameter which defines the amount of material removed and the surface finish produced and is represented as P = (V0^2*𝜏)/Rc*(1/2-exp(-t/𝜏)+0.5*exp(-2*t/𝜏)) or Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant)). Voltage of power supply is the voltage required to charge a given device within given time, Time Constant of the response represents the elapsed time required for the system response to decay to zero if the system had continued to decay at the initial rate, Resistance of the charging circuit is the resistance of the charging circuit & Time elapsed after a particular task is started.
How to calculate Energy Delivered per Spark from Resistance Charging Circuit?
Energy delivered per spark from resistance charging circuit is the parameter which defines the amount of material removed and the surface finish produced is calculated using Energy Delivered per Spark = (Voltage of Power Supply^2*Time Constant)/Resistance of the Charging Circuit*(1/2-exp(-Time Elapsed/Time Constant)+0.5*exp(-2*Time Elapsed/Time Constant)). To calculate Energy Delivered per Spark from Resistance Charging Circuit, you need Voltage of Power Supply (V0), Time Constant (𝜏), Resistance of the Charging Circuit (Rc) & Time Elapsed (t). With our tool, you need to enter the respective value for Voltage of Power Supply, Time Constant, Resistance of the Charging Circuit & Time Elapsed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!