Feed Speed of Workpiece in Slab Milling Calculator

✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate [f]			+10% -10%
✖The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.ⓘ Frequency of Reciprocating Strokes [n_r]			+10% -10%

✖Feed Speed is the Feed given against a workpiece per unit time.ⓘ Feed Speed of Workpiece in Slab Milling [V_f]

⎘ Copy

👎

Formula

✖

Feed Speed of Workpiece in Slab Milling

Formula

`"V"_{"f"} = "f"*"n"_{"r"}`

Example

`"0.00084m/s"="0.70mm/rev"*"1.2Hz"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Feed Speed of Workpiece in Slab Milling Solution

STEP 0: Pre-Calculation Summary

Formula Used

Feed Speed = Feed Rate*Frequency of Reciprocating Strokes
V_f = f*n_r
This formula uses 3 Variables

Variables Used

Feed Speed - (Measured in Meter per Second) - Feed Speed is the Feed given against a workpiece per unit time.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Frequency of Reciprocating Strokes - (Measured in Hertz) - The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

STEP 1: Convert Input(s) to Base Unit

Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Frequency of Reciprocating Strokes: 1.2 Hertz --> 1.2 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_f = f*n_r --> 0.0007*1.2

Evaluating ... ...

V_f = 0.00084

STEP 3: Convert Result to Output's Unit

0.00084 Meter per Second --> No Conversion Required

FINAL ANSWER

0.00084 Meter per Second <-- Feed Speed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Milling Operation » Slab and Slide Milling » Feed Speed of Workpiece in Slab Milling

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 10+ Slab and Slide Milling Calculators

Maximum Chip Thickness obtained in Slab Milling using Depth of Cut

Go Maximum Chip Thickness = 2*Feed Speed*sqrt(Depth of Cut/Diameter of Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency)

Maximum Chip Thickness obtained in Slab Milling using Tool Engagement Angle

Go Maximum Chip Thickness = Feed Speed*sin(Tool Engagement Angle)/(Number of Teeth on Cutting Tool*Rotational Frequency)

Diameter of Tool given Proportion of Edge Engagement for Slab and Side Milling

Go Diameter of A Cutting Tool For Slab = 2*Work Engagement/(sin((Time Proportion of Cutting Edge Engagement-0.25)*2*pi)+1)

Work Engagement given Proportion of Edge Engagement for Slab and Side Milling

Go Work Engagement = (sin((Time Proportion of Cutting Edge Engagement-0.25)*2*pi)+1)*Diameter of A Cutting Tool For Slab/2

Proportion of Cutting Edge Engagement for Slab and Side Milling

Go Time Proportion of Cutting Edge Engagement = 0.25+(asin((2*Work Engagement/Diameter of A Cutting Tool)-1)/(2*pi))

Minimum Length of Approach required in Slab Milling

Go Length of Approach = sqrt(Depth of Cut*(Diameter of Cutting Tool-Depth of Cut))

Tool Engagement Angle in Slab Milling using Depth of Cut

Go Tool Engagement Angle = acos(1-(2*Depth of Cut/Diameter of Cutting Tool))

Depth of Cut in Slab Milling using Tool Engagement Angle

Go Depth of Cut = (1-cos(Tool Engagement Angle))*Diameter of Cutting Tool/2

Feed Speed of Workpiece in Slab Milling

Go Feed Speed = Feed Rate*Frequency of Reciprocating Strokes

Feed in Slab Milling given Feed Speed

Go Feed Rate = Feed Speed/Frequency of Reciprocating Strokes

Feed Speed of Workpiece in Slab Milling Formula

Feed Speed = Feed Rate*Frequency of Reciprocating Strokes
V_f = f*n_r

Define Slab Milling?

Slab Milling, also known as Peripheral Milling is a machining process in which the milling cutter is placed parallel to the workpiece. In other words, the milling cutter is positioned so that the sides of the cutter grind away at the top of the workpiece.

How to Calculate Feed Speed of Workpiece in Slab Milling?

Feed Speed of Workpiece in Slab Milling calculator uses Feed Speed = Feed Rate*Frequency of Reciprocating Strokes to calculate the Feed Speed, The Feed Speed of Workpiece in Slab Milling is defined as the feed given to the Workpiece during machining (Slab Milling) operation per unit time. Feed Speed is denoted by V_f symbol.

How to calculate Feed Speed of Workpiece in Slab Milling using this online calculator? To use this online calculator for Feed Speed of Workpiece in Slab Milling, enter Feed Rate (f) & Frequency of Reciprocating Strokes (n_r) and hit the calculate button. Here is how the Feed Speed of Workpiece in Slab Milling calculation can be explained with given input values -> 0.00084 = 0.0007*1.2.

FAQ

What is Feed Speed of Workpiece in Slab Milling?

The Feed Speed of Workpiece in Slab Milling is defined as the feed given to the Workpiece during machining (Slab Milling) operation per unit time and is represented as V_f = f*n_r or Feed Speed = Feed Rate*Frequency of Reciprocating Strokes. Feed Rate is defined as the tool's distance travelled during one spindle revolution & The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

How to calculate Feed Speed of Workpiece in Slab Milling?

The Feed Speed of Workpiece in Slab Milling is defined as the feed given to the Workpiece during machining (Slab Milling) operation per unit time is calculated using Feed Speed = Feed Rate*Frequency of Reciprocating Strokes. To calculate Feed Speed of Workpiece in Slab Milling, you need Feed Rate (f) & Frequency of Reciprocating Strokes (n_r). With our tool, you need to enter the respective value for Feed Rate & Frequency of Reciprocating Strokes and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search