Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient Solution

STEP 0: Pre-Calculation Summary
Formula Used
Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant)
Q = qf*W*(h^3)/(Ap*μl)
This formula uses 6 Variables
Variables Used
Flow of Lubricant - (Measured in Cubic Meter per Second) - The Flow of Lubricant can be defined as the amount of lubricant flowing per unit time between the surfaces.
Flow Coefficient - The Flow Coefficient is a relative measure of the efficiency at allowing fluid flow.
Load Acting on Sliding Bearing - (Measured in Newton) - Load Acting on Sliding Bearing is the force acting onto the sliding journal bearing.
Oil film thickness - (Measured in Meter) - Oil film thickness is defined as the thickness of the oil film between the two parts in relative motion.
Total Projected Area of Bearing Pad - (Measured in Square Meter) - Total projected area of bearing pad is the total area of the bearing pad that is projected onto the bearing surface.
Dynamic Viscosity of Lubricant - (Measured in Pascal Second) - The Dynamic Viscosity of Lubricant is the resistance to movement of one layer of fluid over another.
STEP 1: Convert Input(s) to Base Unit
Flow Coefficient: 11.8 --> No Conversion Required
Load Acting on Sliding Bearing: 1800 Newton --> 1800 Newton No Conversion Required
Oil film thickness: 0.02 Millimeter --> 2E-05 Meter (Check conversion here)
Total Projected Area of Bearing Pad: 450 Square Millimeter --> 0.00045 Square Meter (Check conversion here)
Dynamic Viscosity of Lubricant: 220 Centipoise --> 0.22 Pascal Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Q = qf*W*(h^3)/(Apl) --> 11.8*1800*(2E-05^3)/(0.00045*0.22)
Evaluating ... ...
Q = 1.71636363636364E-06
STEP 3: Convert Result to Output's Unit
1.71636363636364E-06 Cubic Meter per Second -->1716.36363636364 Cubic Millimeter per Second (Check conversion here)
FINAL ANSWER
1716.36363636364 1716.364 Cubic Millimeter per Second <-- Flow of Lubricant
(Calculation completed in 00.035 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

10+ Hydrostatic Step Bearing with Pad Calculators

Length of Slot in Direction of Flow in Terms of Flow of Lubricant
Go Length of slot in direction of flow = Pressure difference between slot sides*Breadth of slot for oil flow*(Oil film thickness^3)/(12*Dynamic Viscosity of Lubricant*Flow of lubricant from slot)
Flow of Lubricant through slot in Terms of Pressure Difference
Go Flow of lubricant from slot = Pressure difference between slot sides*Breadth of slot for oil flow*(Oil film thickness^3)/(12*Dynamic Viscosity of Lubricant*Length of slot in direction of flow)
Dimension b of Slot given Flow of Lubricant
Go Breadth of slot for oil flow = Length of slot in direction of flow*12*Dynamic Viscosity of Lubricant*Flow of lubricant from slot/((Oil film thickness^3)*Pressure difference between slot sides)
Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient
Go Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant)
Total Projected Area of Bearing Pad in Terms of Flow of Lubricant
Go Total Projected Area of Bearing Pad = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Dynamic Viscosity of Lubricant*Flow of Lubricant)
Flow Coefficient in Terms of Flow of Lubricant through Pad
Go Flow Coefficient = Flow of Lubricant*Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant/(Load Acting on Sliding Bearing*(Oil film thickness^3))
Total Projected Area of Bearing Pad in Terms of Load acting on Bearing
Go Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load coefficient for bearing)
Dimension X in Terms of Total Projected Area of Bearing Pad
Go Dimension X of Bearing Pad = Total Projected Area of Bearing Pad/Dimension Y of Bearing Pad
Dimension Y in Terms of Total Projected Area of Bearing Pad
Go Dimension Y of Bearing Pad = Total Projected Area of Bearing Pad/Dimension X of Bearing Pad
Total Projected Area of Bearing Pad
Go Total Projected Area of Bearing Pad = Dimension X of Bearing Pad*Dimension Y of Bearing Pad

Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient Formula

Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant)
Q = qf*W*(h^3)/(Ap*μl)

What is Sliding Contact Bearing?

The sliding contact bearings in which the sliding action is along the circumference of a circle or an arc of a circle and carrying radial loads are known as journal or sleeve bearings.

How to Calculate Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient?

Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient calculator uses Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant) to calculate the Flow of Lubricant, The Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient formula is defined as ratio of product of flow coefficient, load acting on bearing, and cube of film thickness to product of total projected area and viscosity of lubricant. Flow of Lubricant is denoted by Q symbol.

How to calculate Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient using this online calculator? To use this online calculator for Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient, enter Flow Coefficient (qf), Load Acting on Sliding Bearing (W), Oil film thickness (h), Total Projected Area of Bearing Pad (Ap) & Dynamic Viscosity of Lubricant l) and hit the calculate button. Here is how the Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient calculation can be explained with given input values -> 1.7E+12 = 11.8*1800*(2E-05^3)/(0.00045*0.22).

FAQ

What is Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient?
The Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient formula is defined as ratio of product of flow coefficient, load acting on bearing, and cube of film thickness to product of total projected area and viscosity of lubricant and is represented as Q = qf*W*(h^3)/(Apl) or Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant). The Flow Coefficient is a relative measure of the efficiency at allowing fluid flow, Load Acting on Sliding Bearing is the force acting onto the sliding journal bearing, Oil film thickness is defined as the thickness of the oil film between the two parts in relative motion, Total projected area of bearing pad is the total area of the bearing pad that is projected onto the bearing surface & The Dynamic Viscosity of Lubricant is the resistance to movement of one layer of fluid over another.
How to calculate Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient?
The Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient formula is defined as ratio of product of flow coefficient, load acting on bearing, and cube of film thickness to product of total projected area and viscosity of lubricant is calculated using Flow of Lubricant = Flow Coefficient*Load Acting on Sliding Bearing*(Oil film thickness^3)/(Total Projected Area of Bearing Pad*Dynamic Viscosity of Lubricant). To calculate Flow of Lubricating Oil Passing through Pad in Terms of Flow Coefficient, you need Flow Coefficient (qf), Load Acting on Sliding Bearing (W), Oil film thickness (h), Total Projected Area of Bearing Pad (Ap) & Dynamic Viscosity of Lubricant l). With our tool, you need to enter the respective value for Flow Coefficient, Load Acting on Sliding Bearing, Oil film thickness, Total Projected Area of Bearing Pad & Dynamic Viscosity of Lubricant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!