Force on Lever of Simple Band Brake for Clockwise Rotation of Drum Solution

STEP 0: Pre-Calculation Summary
Formula Used
Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever
P = (T1*b)/l
This formula uses 4 Variables
Variables Used
Force applied at the end of the lever - (Measured in Newton) - Force applied at the end of the lever is any interaction that, when unopposed, will change the motion of an object.
Tension in Tight Side of the Band - (Measured in Newton) - Tension in tight side of the band is described as the pulling force transmitted axially by the means of a string, a cable, chain etc.
Perpendicular distance from fulcrum - (Measured in Meter) - The perpendicular distance from fulcrum is the distance from the fulcrum to the line of action of tension in the tight side or tension in the slack side.
Distance b/w fulcrum and end of lever - (Measured in Meter) - Distance b/w fulcrum and end of lever is a numerical measurement of how far apart objects or points are.
STEP 1: Convert Input(s) to Base Unit
Tension in Tight Side of the Band: 720 Newton --> 720 Newton No Conversion Required
Perpendicular distance from fulcrum: 0.05 Meter --> 0.05 Meter No Conversion Required
Distance b/w fulcrum and end of lever: 1.1 Meter --> 1.1 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = (T1*b)/l --> (720*0.05)/1.1
Evaluating ... ...
P = 32.7272727272727
STEP 3: Convert Result to Output's Unit
32.7272727272727 Newton --> No Conversion Required
FINAL ANSWER
32.7272727272727 32.72727 Newton <-- Force applied at the end of the lever
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Dipto Mandal
Indian Institute of Information Technology (IIIT), Guwahati
Dipto Mandal has verified this Calculator and 400+ more calculators!

10+ Force Calculators

Total Braking Force Acting at Front Wheels (when Brakes are Applied to Front Wheels only)
Go Braking force = Mass of vehicle*Retardation of vehicle-Mass of vehicle*Acceleration due to Gravity*sin(Angle of inclination of plane to horizontal)
Total Braking Force Acting at Rear Wheels when Brakes are Applied to Rear Wheels only
Go Braking force = Mass of vehicle*Retardation of vehicle-Mass of vehicle*Acceleration due to Gravity*sin(Angle of inclination of plane to horizontal)
Force on Lever of Simple Band Brake for Anticlockwise Rotation of Drum
Go Force applied at the end of the lever = (Tension in the slack side of band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever
Force on Lever of Simple Band Brake for Clockwise Rotation of Drum
Go Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever
Brake Clamp Load
Go Brake Clamp Load = Brake torque/(Effective radius*Disc coefficient of friction*No. of friction faces)
Tangential Braking Force given Normal Force on Brake Block
Go Tangential Braking Force = Coefficient of Friction for Brake*Normal force pressing the brake block on the wheel*Radius of Wheel
Tangential Braking Force Acting at Contact Surface of Block and Wheel for Shoe Brake
Go Tangential Braking Force = Coefficient of Friction for Brake*Normal force pressing the brake block on the wheel
Maximum Braking Force Acting at Front Wheels when Brakes are Applied to Front Wheels only
Go Braking force = Coefficient of Friction for Brake*Normal reaction between ground and front wheel
Maximum Value of Total Braking Force Acting at Rear Wheels when Brakes Applied to Rear Wheels only
Go Braking force = Coefficient of Friction for Brake*Normal reaction between ground and rear wheel
Braking Force on Drum for Simple Band Brake
Go Braking force = Tension in Tight Side of the Band-Tension in the slack side of band

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum Formula

Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever
P = (T1*b)/l

What is simple band brake?

A simple band brake in which one end of the band is attached to a fixed pin or fulcrum of the lever while the other end is attached to the lever at a distance b from the fulcrum.

How to Calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum calculator uses Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever to calculate the Force applied at the end of the lever, The Force on lever of simple band brake for clockwise rotation of drum formula is defined as any interaction that, when unopposed, will change the motion of an object. Force applied at the end of the lever is denoted by P symbol.

How to calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum using this online calculator? To use this online calculator for Force on Lever of Simple Band Brake for Clockwise Rotation of Drum, enter Tension in Tight Side of the Band (T1), Perpendicular distance from fulcrum (b) & Distance b/w fulcrum and end of lever (l) and hit the calculate button. Here is how the Force on Lever of Simple Band Brake for Clockwise Rotation of Drum calculation can be explained with given input values -> 32.72727 = (720*0.05)/1.1.

FAQ

What is Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?
The Force on lever of simple band brake for clockwise rotation of drum formula is defined as any interaction that, when unopposed, will change the motion of an object and is represented as P = (T1*b)/l or Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever. Tension in tight side of the band is described as the pulling force transmitted axially by the means of a string, a cable, chain etc, The perpendicular distance from fulcrum is the distance from the fulcrum to the line of action of tension in the tight side or tension in the slack side & Distance b/w fulcrum and end of lever is a numerical measurement of how far apart objects or points are.
How to calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum?
The Force on lever of simple band brake for clockwise rotation of drum formula is defined as any interaction that, when unopposed, will change the motion of an object is calculated using Force applied at the end of the lever = (Tension in Tight Side of the Band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever. To calculate Force on Lever of Simple Band Brake for Clockwise Rotation of Drum, you need Tension in Tight Side of the Band (T1), Perpendicular distance from fulcrum (b) & Distance b/w fulcrum and end of lever (l). With our tool, you need to enter the respective value for Tension in Tight Side of the Band, Perpendicular distance from fulcrum & Distance b/w fulcrum and end of lever and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Force applied at the end of the lever?
In this formula, Force applied at the end of the lever uses Tension in Tight Side of the Band, Perpendicular distance from fulcrum & Distance b/w fulcrum and end of lever. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Force applied at the end of the lever = (Tension in the slack side of band*Perpendicular distance from fulcrum)/Distance b/w fulcrum and end of lever
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!