G12 Parameter given Current-1 (G-Parameter) Calculator

✖Current in port 1 is the magnitude of current flowing through port 1.ⓘ Current in Port 1 [I₁]			+10% -10%
✖G11 Parameter is input admittance.ⓘ G11 Parameter [g₁₁]			+10% -10%
✖Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.ⓘ Voltage Port 1 [V₁]			+10% -10%
✖Current in port 2 is the magnitude of current flowing through port 2.ⓘ Current in Port 2 [I₂]			+10% -10%

✖G12 Parameter is short circuit current ratio.ⓘ G12 Parameter given Current-1 (G-Parameter) [g₁₂]

⎘ Copy

👎

Formula

✖

G12 Parameter given Current-1 (G-Parameter)

Formula

`"g"_{"12"} = ("I"_{"1"}-("g"_{"11"}*"V"_{"1"}))/"I"_{"2"}`

Example

`"-0.078431"=("0.8A"-("0.002℧"*"440V"))/"1.02A"`

Calculator

LaTeX

Reset

👍

Download Two-Port Network Formula PDF

G12 Parameter given Current-1 (G-Parameter) Solution

STEP 0: Pre-Calculation Summary

Formula Used

G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2
g₁₂ = (I₁-(g₁₁*V₁))/I₂
This formula uses 5 Variables

Variables Used

G12 Parameter - G12 Parameter is short circuit current ratio.
Current in Port 1 - (Measured in Ampere) - Current in port 1 is the magnitude of current flowing through port 1.
G11 Parameter - (Measured in Siemens) - G11 Parameter is input admittance.
Voltage Port 1 - (Measured in Volt) - Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.
Current in Port 2 - (Measured in Ampere) - Current in port 2 is the magnitude of current flowing through port 2.

STEP 1: Convert Input(s) to Base Unit

Current in Port 1: 0.8 Ampere --> 0.8 Ampere No Conversion Required
G11 Parameter: 0.002 Mho --> 0.002 Siemens (Check conversion here)
Voltage Port 1: 440 Volt --> 440 Volt No Conversion Required
Current in Port 2: 1.02 Ampere --> 1.02 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

g₁₂ = (I₁-(g₁₁*V₁))/I₂ --> (0.8-(0.002*440))/1.02

Evaluating ... ...

g₁₂ = -0.0784313725490196

STEP 3: Convert Result to Output's Unit

-0.0784313725490196 --> No Conversion Required

FINAL ANSWER

-0.0784313725490196 ≈ -0.078431 <-- G12 Parameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two-Port Network » G-Parameters » G12 Parameter given Current-1 (G-Parameter)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 16 G-Parameters Calculators

G12 Parameter given Current-1 (G-Parameter)

Go G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2

G11 Parameter given Current-1 (G-Parameter)

Go G11 Parameter = (Current in Port 1-(G12 Parameter*Current in Port 2))/Voltage Port 1

Current-1 (G-Parameter)

Go Current in Port 1 = (G11 Parameter*Voltage Port 1)+(G12 Parameter*Current in Port 2)

Current-2 given Voltage-2 (G-Parameter)

Go Current in Port 2 = (Voltage Port 2-(G21 Parameter*Voltage Port 1))/G22 Parameter

G12 Parameter (G-Parameter)

Go G12 Parameter = Current in Port 1/Current in Port 2

Current-1 given G11 Parameter (G-Parameter)

Go Current in Port 1 = Voltage Port 1*G11 Parameter

G11 Parameter (G-Parameter)

Go G11 Parameter = Current in Port 1/Voltage Port 1

Delta-G given A' Parameter

Go Delta-G = (-1)*G12 Parameter*A Inverse Parameter

G21 Parameter (G-Parameter)

Go G21 Parameter = Voltage Port 2/Voltage Port 1

G21 Parameter in Terms of Y Parameters

Go G21 Parameter = -Y21 Parameter/Y22 Parameter

G21 Parameter in Terms of Z Parameters

Go G21 Parameter = Z21 Parameter/Z11 Parameter

G11 Parameter in Terms of T Parameters

Go G11 Parameter = C Parameter/A Parameter

G22 Parameter in Terms of Z Parameters

Go G22 Parameter = Delta-Z/Z11 Parameter

G11 Parameter in Terms of Y Parameters

Go G11 Parameter = Delta-Y/Y22 Parameter

G22 Parameter in Terms of Y Parameters

Go G22 Parameter = 1/Y22 Parameter

G21 Parameter in Terms of T Parameters

Go G21 Parameter = 1/A Parameter

G12 Parameter given Current-1 (G-Parameter) Formula

G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2
g₁₂ = (I₁-(g₁₁*V₁))/I₂

What is inverse hybrid parameter?

We will get the set of two equations by considering the variables I1 & V2 as dependent and V1 & I2 as independent. The coefficients of independent variables, V1 and I2 are called g-parameters. g-parameters are called inverse hybrid parameters.

How to Calculate G12 Parameter given Current-1 (G-Parameter)?

G12 Parameter given Current-1 (G-Parameter) calculator uses G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2 to calculate the G12 Parameter, The G12 Parameter given Current-1 (G-parameter) formula is defined as the short circuit current ratio of a two-port network of the inverse hybrid parameters. G12 Parameter is denoted by g₁₂ symbol.

How to calculate G12 Parameter given Current-1 (G-Parameter) using this online calculator? To use this online calculator for G12 Parameter given Current-1 (G-Parameter), enter Current in Port 1 (I₁), G11 Parameter (g₁₁), Voltage Port 1 (V₁) & Current in Port 2 (I₂) and hit the calculate button. Here is how the G12 Parameter given Current-1 (G-Parameter) calculation can be explained with given input values -> -0.078431 = (0.8-(0.002*440))/1.02.

FAQ

What is G12 Parameter given Current-1 (G-Parameter)?

The G12 Parameter given Current-1 (G-parameter) formula is defined as the short circuit current ratio of a two-port network of the inverse hybrid parameters and is represented as g₁₂ = (I₁-(g₁₁*V₁))/I₂ or G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2. Current in port 1 is the magnitude of current flowing through port 1, G11 Parameter is input admittance, Voltage port 1 is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light & Current in port 2 is the magnitude of current flowing through port 2.

How to calculate G12 Parameter given Current-1 (G-Parameter)?

The G12 Parameter given Current-1 (G-parameter) formula is defined as the short circuit current ratio of a two-port network of the inverse hybrid parameters is calculated using G12 Parameter = (Current in Port 1-(G11 Parameter*Voltage Port 1))/Current in Port 2. To calculate G12 Parameter given Current-1 (G-Parameter), you need Current in Port 1 (I₁), G11 Parameter (g₁₁), Voltage Port 1 (V₁) & Current in Port 2 (I₂). With our tool, you need to enter the respective value for Current in Port 1, G11 Parameter, Voltage Port 1 & Current in Port 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate G12 Parameter?

In this formula, G12 Parameter uses Current in Port 1, G11 Parameter, Voltage Port 1 & Current in Port 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

G12 Parameter = Current in Port 1/Current in Port 2

Home

FREE PDFs

🔍 Search