Hole Radius of Torus given Radius and Total Surface Area Calculator

✖Radius of Torus is the line connecting the center of the overall Torus to the center of a circular cross-section of the Torus.ⓘ Radius of Torus [r]			+10% -10%
✖Total Surface Area of Torus is the total quantity of two dimensional space enclosed on the entire surface of the Torus.ⓘ Total Surface Area of Torus [TSA]			+10% -10%

✖Hole Radius of Torus is the shortest line connecting the center of the Torus to the nearest point on the circumference of the circular cross-section of the Torus.ⓘ Hole Radius of Torus given Radius and Total Surface Area [r_Hole]

⎘ Copy

👎

Formula

✖

Hole Radius of Torus given Radius and Total Surface Area

Formula

`"r"_{"Hole"} = "r"-("TSA"/(4*pi^2*"r"))`

Example

`"1.894305m"="10m"-("3200m²"/(4*pi^2*"10m"))`

Calculator

LaTeX

Reset

👍

Download Torus Formula PDF

Hole Radius of Torus given Radius and Total Surface Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus))
r_Hole = r-(TSA/(4*pi^2*r))
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Hole Radius of Torus - (Measured in Meter) - Hole Radius of Torus is the shortest line connecting the center of the Torus to the nearest point on the circumference of the circular cross-section of the Torus.
Radius of Torus - (Measured in Meter) - Radius of Torus is the line connecting the center of the overall Torus to the center of a circular cross-section of the Torus.
Total Surface Area of Torus - (Measured in Square Meter) - Total Surface Area of Torus is the total quantity of two dimensional space enclosed on the entire surface of the Torus.

STEP 1: Convert Input(s) to Base Unit

Radius of Torus: 10 Meter --> 10 Meter No Conversion Required
Total Surface Area of Torus: 3200 Square Meter --> 3200 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r_Hole = r-(TSA/(4*pi^2*r)) --> 10-(3200/(4*pi^2*10))

Evaluating ... ...

r_Hole = 1.89430530861298

STEP 3: Convert Result to Output's Unit

1.89430530861298 Meter --> No Conversion Required

FINAL ANSWER

1.89430530861298 ≈ 1.894305 Meter <-- Hole Radius of Torus

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Torus » Radius of Torus » Hole Radius of Torus » Hole Radius of Torus given Radius and Total Surface Area

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< 8 Hole Radius of Torus Calculators

Hole Radius of Torus given Radius of Circular Section and Total Surface Area

Go Hole Radius of Torus = (Total Surface Area of Torus/(4*pi^2*Radius of Circular Section of Torus))-(Radius of Circular Section of Torus)

Hole Radius of Torus given Radius of Circular Section and Volume

Go Hole Radius of Torus = (Volume of Torus/(2*pi^2*Radius of Circular Section of Torus^2))-(Radius of Circular Section of Torus)

Hole Radius of Torus given Radius and Volume

Go Hole Radius of Torus = Radius of Torus-(sqrt(Volume of Torus/(2*pi^2*Radius of Torus)))

Hole Radius of Torus given Radius and Total Surface Area

Go Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus))

Hole Radius of Torus given Radius and Breadth

Go Hole Radius of Torus = Radius of Torus-((Breadth of Torus/2)-Radius of Torus)

Hole Radius of Torus given Radius of Circular Section and Breadth

Go Hole Radius of Torus = (Breadth of Torus/2)-(2*Radius of Circular Section of Torus)

Hole Radius of Torus given Radius and Surface to Volume Ratio

Go Hole Radius of Torus = Radius of Torus-(2/Surface to Volume Ratio of Torus)

Hole Radius of Torus

Go Hole Radius of Torus = Radius of Torus-Radius of Circular Section of Torus

Hole Radius of Torus given Radius and Total Surface Area Formula

Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus))
r_Hole = r-(TSA/(4*pi^2*r))

What is Torus?

In geometry, a Torus (plural tori) is a surface of revolution generated by revolving a circle in three-dimensional space about an axis that is coplanar with the circle. If the axis of revolution does not touch the circle, the surface has a ring shape and is called a torus of revolution. If the axis of revolution is tangent to the circle, the surface is a horn torus. If the axis of revolution passes twice through the circle, the surface is a spindle torus. If the axis of revolution passes through the center of the circle, the surface is a degenerate torus, a double-covered sphere. If the revolved curve is not a circle, the surface is a related shape, a toroid.

How to Calculate Hole Radius of Torus given Radius and Total Surface Area?

Hole Radius of Torus given Radius and Total Surface Area calculator uses Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus)) to calculate the Hole Radius of Torus, Hole Radius of Torus given Radius and Total Surface Area formula is defined as the shortest line connecting the center of Torus to nearest point on circumference of the circular cross section of Torus, calculated using the radius and the total surface area of Torus. Hole Radius of Torus is denoted by r_Hole symbol.

How to calculate Hole Radius of Torus given Radius and Total Surface Area using this online calculator? To use this online calculator for Hole Radius of Torus given Radius and Total Surface Area, enter Radius of Torus (r) & Total Surface Area of Torus (TSA) and hit the calculate button. Here is how the Hole Radius of Torus given Radius and Total Surface Area calculation can be explained with given input values -> 1.894305 = 10-(3200/(4*pi^2*10)).

FAQ

What is Hole Radius of Torus given Radius and Total Surface Area?

Hole Radius of Torus given Radius and Total Surface Area formula is defined as the shortest line connecting the center of Torus to nearest point on circumference of the circular cross section of Torus, calculated using the radius and the total surface area of Torus and is represented as r_Hole = r-(TSA/(4*pi^2*r)) or Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus)). Radius of Torus is the line connecting the center of the overall Torus to the center of a circular cross-section of the Torus & Total Surface Area of Torus is the total quantity of two dimensional space enclosed on the entire surface of the Torus.

How to calculate Hole Radius of Torus given Radius and Total Surface Area?

Hole Radius of Torus given Radius and Total Surface Area formula is defined as the shortest line connecting the center of Torus to nearest point on circumference of the circular cross section of Torus, calculated using the radius and the total surface area of Torus is calculated using Hole Radius of Torus = Radius of Torus-(Total Surface Area of Torus/(4*pi^2*Radius of Torus)). To calculate Hole Radius of Torus given Radius and Total Surface Area, you need Radius of Torus (r) & Total Surface Area of Torus (TSA). With our tool, you need to enter the respective value for Radius of Torus & Total Surface Area of Torus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Hole Radius of Torus?

In this formula, Hole Radius of Torus uses Radius of Torus & Total Surface Area of Torus. We can use 7 other way(s) to calculate the same, which is/are as follows -

Hole Radius of Torus = Radius of Torus-Radius of Circular Section of Torus
Hole Radius of Torus = (Breadth of Torus/2)-(2*Radius of Circular Section of Torus)
Hole Radius of Torus = (Total Surface Area of Torus/(4*pi^2*Radius of Circular Section of Torus))-(Radius of Circular Section of Torus)
Hole Radius of Torus = (Volume of Torus/(2*pi^2*Radius of Circular Section of Torus^2))-(Radius of Circular Section of Torus)
Hole Radius of Torus = Radius of Torus-((Breadth of Torus/2)-Radius of Torus)
Hole Radius of Torus = Radius of Torus-(sqrt(Volume of Torus/(2*pi^2*Radius of Torus)))
Hole Radius of Torus = Radius of Torus-(2/Surface to Volume Ratio of Torus)

Home

FREE PDFs

🔍 Search