Indicated Power of Two-stroke Engine Solution

STEP 0: Pre-Calculation Summary
Formula Used
Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed))
IP = (k*MEP*L*A*(N))
This formula uses 6 Variables
Variables Used
Indicated Power - (Measured in Watt) - Indicated power is the total power produced due to combustion of fuel within the IC engine's cylinder in one complete cycle neglecting any losses.
Number of Cylinders - Number of Cylinders is the count of the cylinders that are present on the engine.
Mean Effective Pressure - (Measured in Pascal) - Mean Effective Pressure is used to measure the performance of a combustion engine.
Stroke Length - (Measured in Meter) - Stroke Length is the distance travelled by the piston during each cycle.
Area of Cross Section - (Measured in Square Meter) - Area of cross section is the enclosed surface area, product of length and breadth.
Engine Speed - (Measured in Radian per Second) - Engine Speed is the speed at which the crankshaft of the engine rotates.
STEP 1: Convert Input(s) to Base Unit
Number of Cylinders: 4 --> No Conversion Required
Mean Effective Pressure: 0.07 Kilopascal --> 70 Pascal (Check conversion here)
Stroke Length: 8.8 Centimeter --> 0.088 Meter (Check conversion here)
Area of Cross Section: 30 Square Centimeter --> 0.003 Square Meter (Check conversion here)
Engine Speed: 4000 Revolution per Minute --> 418.879020457308 Radian per Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
IP = (k*MEP*L*A*(N)) --> (4*70*0.088*0.003*(418.879020457308))
Evaluating ... ...
IP = 30.9635371922042
STEP 3: Convert Result to Output's Unit
30.9635371922042 Watt -->0.0309635371922042 Kilowatt (Check conversion here)
FINAL ANSWER
0.0309635371922042 0.030964 Kilowatt <-- Indicated Power
(Calculation completed in 00.004 seconds)

Credits

Indian Institute of Technology (IIT (ISM) ), Dhanbad, Jharkhand
Aditya Prakash Gautam has created this Calculator and 25+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

2 For 2 Stroke Engine Calculators

Indicated Power of Two-stroke Engine
Go Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed))
Brake Mean Effective Pressure of 2S engines given Brake power
Go Brake Mean Effective Pressure = (Brake Power)/(Stroke Length*Area of Cross Section*(Engine Speed))

Indicated Power of Two-stroke Engine Formula

Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed))
IP = (k*MEP*L*A*(N))

What is the number of cycles per minute in two stroke IC engines ?

In two stroke IC engines, one cycle will be completed in exactly one revolution of the crank shaft. Therefore the work will be produced in each revolution of the crank shaft. Thus the number of cycles per minute will be equal to the number of revolutions per minute.

How to Calculate Indicated Power of Two-stroke Engine?

Indicated Power of Two-stroke Engine calculator uses Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed)) to calculate the Indicated Power, The Indicated Power of Two-stroke Engine formula is defined as the power developed by combustion of fuel in the cylinder of engine. Indicated Power is denoted by IP symbol.

How to calculate Indicated Power of Two-stroke Engine using this online calculator? To use this online calculator for Indicated Power of Two-stroke Engine, enter Number of Cylinders (k), Mean Effective Pressure (MEP), Stroke Length (L), Area of Cross Section (A) & Engine Speed (N) and hit the calculate button. Here is how the Indicated Power of Two-stroke Engine calculation can be explained with given input values -> 3.1E-5 = (4*70*0.088*0.003*(418.879020457308)).

FAQ

What is Indicated Power of Two-stroke Engine?
The Indicated Power of Two-stroke Engine formula is defined as the power developed by combustion of fuel in the cylinder of engine and is represented as IP = (k*MEP*L*A*(N)) or Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed)). Number of Cylinders is the count of the cylinders that are present on the engine, Mean Effective Pressure is used to measure the performance of a combustion engine, Stroke Length is the distance travelled by the piston during each cycle, Area of cross section is the enclosed surface area, product of length and breadth & Engine Speed is the speed at which the crankshaft of the engine rotates.
How to calculate Indicated Power of Two-stroke Engine?
The Indicated Power of Two-stroke Engine formula is defined as the power developed by combustion of fuel in the cylinder of engine is calculated using Indicated Power = (Number of Cylinders*Mean Effective Pressure*Stroke Length*Area of Cross Section*(Engine Speed)). To calculate Indicated Power of Two-stroke Engine, you need Number of Cylinders (k), Mean Effective Pressure (MEP), Stroke Length (L), Area of Cross Section (A) & Engine Speed (N). With our tool, you need to enter the respective value for Number of Cylinders, Mean Effective Pressure, Stroke Length, Area of Cross Section & Engine Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!