Infeed given Metal removal rate during Grinding Calculator

✖Metal removal rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as grinding.ⓘ Metal removal rate [Z_w]			+10% -10%
✖Back Engagement in Grinding is defined as the width of the path of the grinding tool.ⓘ Back Engagement in Grinding [A_p]			+10% -10%
✖Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.ⓘ Surface Speed of Workpiece [V_w]			+10% -10%

✖The Infeed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.ⓘ Infeed given Metal removal rate during Grinding [F_infeed]

⎘ Copy

👎

Formula

✖

Infeed given Metal removal rate during Grinding

Formula

`"F"_{"infeed"} = "Z"_{"w"}/("A"_{"p"}*"V"_{"w"})`

Example

`"1.329693mm"="0.00375m³/s"/("478mm"*"5.9m/s")`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Infeed given Metal removal rate during Grinding Solution

STEP 0: Pre-Calculation Summary

Formula Used

Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece)
F_infeed = Z_w/(A_p*V_w)
This formula uses 4 Variables

Variables Used

Infeed - (Measured in Meter) - The Infeed is the distance the cutting tool advances along the length of the work for every revolution of the spindle.
Metal removal rate - (Measured in Cubic Meter per Second) - Metal removal rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as grinding.
Back Engagement in Grinding - (Measured in Meter) - Back Engagement in Grinding is defined as the width of the path of the grinding tool.
Surface Speed of Workpiece - (Measured in Meter per Second) - Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.

STEP 1: Convert Input(s) to Base Unit

Metal removal rate: 0.00375 Cubic Meter per Second --> 0.00375 Cubic Meter per Second No Conversion Required
Back Engagement in Grinding: 478 Millimeter --> 0.478 Meter (Check conversion here)
Surface Speed of Workpiece: 5.9 Meter per Second --> 5.9 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_infeed = Z_w/(A_p*V_w) --> 0.00375/(0.478*5.9)

Evaluating ... ...

F_infeed = 0.00132969292957946

STEP 3: Convert Result to Output's Unit

0.00132969292957946 Meter -->1.32969292957946 Millimeter (Check conversion here)

FINAL ANSWER

1.32969292957946 ≈ 1.329693 Millimeter <-- Infeed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Material Removed » Grain » Infeed given Metal removal rate during Grinding

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< 13 Grain Calculators

Number of active Grains per unit area given Constant for grinding wheel

Go Number of Active Grains per Area on Wheel Surface = 6/(Constant for Particular Grinding Wheel*Grain aspect ratio*sqrt(Diameter of Grinding Wheel))

Grain-aspect Ratio given Constant for grinding wheel

Go Grain aspect ratio = 6/(Number of Active Grains per Area on Wheel Surface*Constant for Particular Grinding Wheel*sqrt(Diameter of Grinding Wheel))

Infeed given constant for grinding wheel

Go Feed = ((Maximum Undeformed Chip Thickness^2)*Surface Speed of Wheel/(Constant for Particular Grinding Wheel*Surface Speed of Workpiece))^2

Material Removal Rate in Plunge-Grinder

Go Maximum Material Removal Rate = pi*Back Engagement*Machined Surface Diameter*Feed Speed in Plunge Grinding

Material Removal Rate in Cylindrical and Internal Grinder

Go Maximum Material Removal Rate = pi*Feed Rate of the Machine Table*Diameter of Work Surface*Traverse Speed

Number of active Grains per unit area on wheel surface

Go Number of Active Grains per Area on Wheel Surface = Number of Chip Produced per Unit Time/(Surface Speed of Wheel*Back Engagement)

Traverse Speed for Cylindrical and Internal Grinder given MRR

Go Traverse Speed of Work-table = pi*Feed Rate*Work Surface Diameter/Metal removal rate

Width of Grinding path given Metal removal rate

Go Back Engagement = Metal removal rate/(Infeed in Grinding Operation*Surface Speed of Workpiece)

Metal removal rate during Grinding

Go Metal removal rate = Infeed in Grinding Operation*Back Engagement*Surface Speed of Workpiece

Infeed given Metal removal rate during Grinding

Go Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece)

Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR

Go Traverse Speed of Work-table = Feed Rate*Depth of Cut/Metal removal rate

Material Removal Rate in Horizontal and Vertical Spindle Surface-Grinder

Go Material Removal Rate = Cross Feed*Back Engagement*Traverse Speed

Grain-aspect Ratio

Go Grain aspect ratio = Maximum Width of Chip/Maximum Undeformed Chip Thickness

Infeed given Metal removal rate during Grinding Formula

Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece)
F_infeed = Z_w/(A_p*V_w)

Why is Grinding used for?

Grinding is a machining process that's used to remove material from a workpiece via a grinding wheel. As the grinding wheel turns, it cuts material off the workpiece while creating a smooth surface texture in the process.

How to Calculate Infeed given Metal removal rate during Grinding?

Infeed given Metal removal rate during Grinding calculator uses Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece) to calculate the Infeed, The Infeed given Metal removal rate during Grinding is the distance the cutting tool advances along the length of the work for every revolution of the spindle. Infeed is denoted by F_infeed symbol.

How to calculate Infeed given Metal removal rate during Grinding using this online calculator? To use this online calculator for Infeed given Metal removal rate during Grinding, enter Metal removal rate (Z_w), Back Engagement in Grinding (A_p) & Surface Speed of Workpiece (V_w) and hit the calculate button. Here is how the Infeed given Metal removal rate during Grinding calculation can be explained with given input values -> 1329.693 = 0.00375/(0.478*5.9).

FAQ

What is Infeed given Metal removal rate during Grinding?

The Infeed given Metal removal rate during Grinding is the distance the cutting tool advances along the length of the work for every revolution of the spindle and is represented as F_infeed = Z_w/(A_p*V_w) or Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece). Metal removal rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as grinding, Back Engagement in Grinding is defined as the width of the path of the grinding tool & Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.

How to calculate Infeed given Metal removal rate during Grinding?

The Infeed given Metal removal rate during Grinding is the distance the cutting tool advances along the length of the work for every revolution of the spindle is calculated using Infeed = Metal removal rate/(Back Engagement in Grinding*Surface Speed of Workpiece). To calculate Infeed given Metal removal rate during Grinding, you need Metal removal rate (Z_w), Back Engagement in Grinding (A_p) & Surface Speed of Workpiece (V_w). With our tool, you need to enter the respective value for Metal removal rate, Back Engagement in Grinding & Surface Speed of Workpiece and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search