Intrados Stresses on Arch Dam Solution

STEP 0: Pre-Calculation Summary
Formula Used
Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2))
S = (F/t)+(6*Mt/(t^2))
This formula uses 4 Variables
Variables Used
Intrados Stresses - (Measured in Pascal) - Intrados Stresses is defined as the stresses on the inner wall of the Arch Dam.
Thrust of Abutments - (Measured in Newton) - Thrust of Abutments refers to the horizontal force exerted by an arch, vault, or similar structure against its supporting abutments.
Horizontal Thickness of an Arch - (Measured in Meter) - Horizontal Thickness of an Arch, also known as the arch thickness or arch rise, refers to the distance between the intrados and the extrados along the horizontal axis.
Moment acting on Arch Dam - (Measured in Joule) - Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
STEP 1: Convert Input(s) to Base Unit
Thrust of Abutments: 63.55 Newton --> 63.55 Newton No Conversion Required
Horizontal Thickness of an Arch: 1.2 Meter --> 1.2 Meter No Conversion Required
Moment acting on Arch Dam: 54.5 Newton Meter --> 54.5 Joule (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
S = (F/t)+(6*Mt/(t^2)) --> (63.55/1.2)+(6*54.5/(1.2^2))
Evaluating ... ...
S = 280.041666666667
STEP 3: Convert Result to Output's Unit
280.041666666667 Pascal -->280.041666666667 Newton per Square Meter (Check conversion here)
FINAL ANSWER
280.041666666667 280.0417 Newton per Square Meter <-- Intrados Stresses
(Calculation completed in 00.020 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

9 Arch Dams Calculators

Angle between Crown and Abutments given Thrust at Abutments of Arch Dam
Go Theta = acos((Thrust from Water-Radial Pressure*Radius to Center Line of Arch)/(-Radial Pressure*Radius to Center Line of Arch+Thrust of Abutments))
Radius to centerline given Thrust at Abutments of Arch Dam
Go Radius to Center Line of Arch = ((Thrust from Water-Thrust of Abutments*cos(Theta))/(1-cos(Theta)))/Radial Pressure
Rotation due to Moment on Arch Dam
Go Angle of Rotation = Moment acting on Arch Dam*Constant K1/(Elastic Modulus of Rock*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch)
Intrados Stresses on Arch Dam
Go Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2))
Extrados Stresses on Arch Dam
Go Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)-(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2))
Rotation due to Twist on Arch Dam
Go Angle of Rotation = Cantilever Twisting Moment*Constant K4/(Elastic Modulus of Rock*Horizontal Thickness of an Arch^2)
Shear Force given Rotation due to Shear on Arch Dam
Go Shear Force = Angle of Rotation*(Elastic Modulus of Rock*Horizontal Thickness of an Arch)/Constant K5
Rotation due to Shear on Arch Dam
Go Angle of Rotation = Shear Force*Constant K5/(Elastic Modulus of Rock*Horizontal Thickness of an Arch)
Shear Force given Deflection due to Shear on Arch Dam
Go Shear Force = Deflection due to Moments on Arch Dam*Elastic Modulus of Rock/Constant K3

Intrados Stresses on Arch Dam Formula

Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2))
S = (F/t)+(6*Mt/(t^2))

What are Intrados Stress ?

The changes in geometry as the pressure or fluid moves around the bend cause the changes in stress. The hoop stresses on the outside (extrados) become lower, and the inside (intrados) stresses intensify.

How to Calculate Intrados Stresses on Arch Dam?

Intrados Stresses on Arch Dam calculator uses Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2)) to calculate the Intrados Stresses, Intrados Stresses on Arch Dam is defined as stress on inner wall of arch dam, due to curvature of dam. Intrados Stresses is denoted by S symbol.

How to calculate Intrados Stresses on Arch Dam using this online calculator? To use this online calculator for Intrados Stresses on Arch Dam, enter Thrust of Abutments (F), Horizontal Thickness of an Arch (t) & Moment acting on Arch Dam (Mt) and hit the calculate button. Here is how the Intrados Stresses on Arch Dam calculation can be explained with given input values -> 280.0417 = (63.55/1.2)+(6*54.5/(1.2^2)).

FAQ

What is Intrados Stresses on Arch Dam?
Intrados Stresses on Arch Dam is defined as stress on inner wall of arch dam, due to curvature of dam and is represented as S = (F/t)+(6*Mt/(t^2)) or Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2)). Thrust of Abutments refers to the horizontal force exerted by an arch, vault, or similar structure against its supporting abutments, Horizontal Thickness of an Arch, also known as the arch thickness or arch rise, refers to the distance between the intrados and the extrados along the horizontal axis & Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
How to calculate Intrados Stresses on Arch Dam?
Intrados Stresses on Arch Dam is defined as stress on inner wall of arch dam, due to curvature of dam is calculated using Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)+(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2)). To calculate Intrados Stresses on Arch Dam, you need Thrust of Abutments (F), Horizontal Thickness of an Arch (t) & Moment acting on Arch Dam (Mt). With our tool, you need to enter the respective value for Thrust of Abutments, Horizontal Thickness of an Arch & Moment acting on Arch Dam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Intrados Stresses?
In this formula, Intrados Stresses uses Thrust of Abutments, Horizontal Thickness of an Arch & Moment acting on Arch Dam. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Intrados Stresses = (Thrust of Abutments/Horizontal Thickness of an Arch)-(6*Moment acting on Arch Dam/(Horizontal Thickness of an Arch^2))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!