Length of Cut using Machining Time Calculator

✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate [f]			+10% -10%
✖Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.ⓘ Machining Time [t_m]			+10% -10%
✖Rotational Frequency of Workpiece is defined as the number of rotations the workpiece makes in a unit amount of time.ⓘ Rotational Frequency of Workpiece [n_w]			+10% -10%

✖Length of cut (LOC) is a measurement of the functional cutting depth in the axial direction for a machining process.ⓘ Length of Cut using Machining Time [l_w]

⎘ Copy

👎

Formula

✖

Length of Cut using Machining Time

Formula

`"l"_{"w"} = "f"*"t"_{"m"}*"n"_{"w"}`

Example

`"436.0939mm"="0.70mm/rev"*"62.6224s"*"95rev/min"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Length of Cut using Machining Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece
l_w = f*t_m*n_w
This formula uses 4 Variables

Variables Used

Length of Cut - (Measured in Meter) - Length of cut (LOC) is a measurement of the functional cutting depth in the axial direction for a machining process.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Machining Time - (Measured in Second) - Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.
Rotational Frequency of Workpiece - (Measured in Radian per Second) - Rotational Frequency of Workpiece is defined as the number of rotations the workpiece makes in a unit amount of time.

STEP 1: Convert Input(s) to Base Unit

Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Machining Time: 62.6224 Second --> 62.6224 Second No Conversion Required
Rotational Frequency of Workpiece: 95 Revolution per Minute --> 9.94837673586108 Radian per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l_w = f*t_m*n_w --> 0.0007*62.6224*9.94837673586108

Evaluating ... ...

l_w = 0.436093859112651

STEP 3: Convert Result to Output's Unit

0.436093859112651 Meter -->436.093859112651 Millimeter (Check conversion here)

FINAL ANSWER

436.093859112651 ≈ 436.0939 Millimeter <-- Length of Cut

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Drilling Operation » Length of Cut using Machining Time

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 8 Drilling Operation Calculators

Material Removal Rate during Drilling Operation using Feed

Go Material Removal Rate in Drilling = pi*(Machine Surface Diameter^2)*Feed Rate in Drilling Operation*Rotational Frequency of Tool/4

Material Removal Rate during Drilling Operation when Enlarging Existing Hole

Go Material Removal Rate = pi*((Machine Surface Diameter^2)-(Work Surface Diameter^2))*Feed Speed/4

Diameter of Drill Bit given Length of Approach

Go Diameter of drill bit = 2*Approach Distance/tan((pi/2)-(Drill Point Angle/2))

Material Removal Rate during Drilling Operation

Go Material Removal Rate in Drilling = pi*(Machine Surface Diameter^2)*Feed Speed/4

Machining Time for Drilling Operation

Go Machining Time = Length of Cut/(Feed Rate*Rotational Frequency of Drill-bit)

Length of Cut using Machining Time

Go Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece

Drill Point Angle for given Length of Approach

Go Drill Point Angle = 2*atan(0.5*Diameter of drill bit/Approach Distance)

Length of Approach for Drilling Operation

Go Approach Distance = 0.5*Diameter of drill bit*cot(Drill Point Angle/2)

Length of Cut using Machining Time Formula

Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece
l_w = f*t_m*n_w

Length of Cut and Overall Length

Length of Cut is the actual length the Machining Tool cuts during a single pass in a forward stroke. This is usually equal to the Length of the Workpiece.
Overall length is simply the measurement between the two axial ends of the tool.
Overall Length = Length of Approach + Length of Cut + Over Travel

How to Calculate Length of Cut using Machining Time?

Length of Cut using Machining Time calculator uses Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece to calculate the Length of Cut, The Length of Cut using Machining Time is a method to determine the maximum length that a tool can travel during the Forward Cut in a given time for a definite Feed Rate. Length of Cut is denoted by l_w symbol.

How to calculate Length of Cut using Machining Time using this online calculator? To use this online calculator for Length of Cut using Machining Time, enter Feed Rate (f), Machining Time (t_m) & Rotational Frequency of Workpiece (n_w) and hit the calculate button. Here is how the Length of Cut using Machining Time calculation can be explained with given input values -> 436093.9 = 0.0007*62.6224*9.94837673586108.

FAQ

What is Length of Cut using Machining Time?

The Length of Cut using Machining Time is a method to determine the maximum length that a tool can travel during the Forward Cut in a given time for a definite Feed Rate and is represented as l_w = f*t_m*n_w or Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece. Feed Rate is defined as the tool's distance travelled during one spindle revolution, Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material & Rotational Frequency of Workpiece is defined as the number of rotations the workpiece makes in a unit amount of time.

How to calculate Length of Cut using Machining Time?

The Length of Cut using Machining Time is a method to determine the maximum length that a tool can travel during the Forward Cut in a given time for a definite Feed Rate is calculated using Length of Cut = Feed Rate*Machining Time*Rotational Frequency of Workpiece. To calculate Length of Cut using Machining Time, you need Feed Rate (f), Machining Time (t_m) & Rotational Frequency of Workpiece (n_w). With our tool, you need to enter the respective value for Feed Rate, Machining Time & Rotational Frequency of Workpiece and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search