Length of Inclined Manometer Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle))
L = Pa/(γ1*sin(Θ))
This formula uses 1 Functions, 4 Variables
Functions Used
sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
Variables Used
Length of Inclined Manometer - (Measured in Meter) - Length of inclined manometer is defined as the length of the liquid present in the manometer wing.
Pressure a - (Measured in Pascal) - Pressure a is pressure at a point a.
Specific Weight 1 - (Measured in Newton per Cubic Meter) - Specific weight 1 is the specific weight of the fluid 1.
Angle - (Measured in Radian) - Angle between the inclined manometer tube and surface.
STEP 1: Convert Input(s) to Base Unit
Pressure a: 6 Pascal --> 6 Pascal No Conversion Required
Specific Weight 1: 1342 Newton per Cubic Meter --> 1342 Newton per Cubic Meter No Conversion Required
Angle: 35 Degree --> 0.610865238197901 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
L = Pa/(γ1*sin(Θ)) --> 6/(1342*sin(0.610865238197901))
Evaluating ... ...
L = 0.00779484409368726
STEP 3: Convert Result to Output's Unit
0.00779484409368726 Meter -->0.779484409368726 Centimeter (Check conversion here)
FINAL ANSWER
0.779484409368726 0.779484 Centimeter <-- Length of Inclined Manometer
(Calculation completed in 00.020 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

25 Pressure Relations Calculators

Depth of Centroid given Center of Pressure
Go Depth of Centroid = (Center of Pressure*Surface area+sqrt((Center of Pressure*Surface area)^2+4*Surface area*Moment of Inertia))/(2*Surface area)
Center of Pressure on Inclined Plane
Go Center of Pressure = Depth of Centroid+(Moment of Inertia*sin(Angle)*sin(Angle))/(Wet Surface Area*Depth of Centroid)
Differential Pressure-Differential Manometer
Go Pressure Changes = Specific weight 2*Height of Column 2+Specific Weight of Manometer liquid*Height of Manometer Liquid-Specific Weight 1*Height of Column 1
Area of Surface Wetted given Center of Pressure
Go Wet Surface Area = Moment of Inertia/((Center of Pressure-Depth of Centroid)*Depth of Centroid)
Height of Fluid 1 given Differential Pressure between Two Points
Go Height of Column 1 = (Pressure Changes+Specific weight 2*Height of Column 2)/Specific Weight 1
Height of Fluid 2 given Differential Pressure between Two Points
Go Height of Column 2 = (Specific Weight 1*Height of Column 1-Pressure Changes)/Specific weight 2
Moment of Inertia of Centroid given Center of Pressure
Go Moment of Inertia = (Center of Pressure-Depth of Centroid)*Wet Surface Area*Depth of Centroid
Center of Pressure
Go Center of Pressure = Depth of Centroid+Moment of Inertia/(Wet Surface Area*Depth of Centroid)
Differential Pressure between Two Points
Go Pressure Changes = Specific Weight 1*Height of Column 1-Specific weight 2*Height of Column 2
Angle of Inclined Manometer given Pressure at Point
Go Angle = asin(Pressure on Point/Specific Weight 1*Length of Inclined Manometer)
Length of Inclined Manometer
Go Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle))
Pressure using Inclined Manometer
Go Pressure a = Specific Weight 1*Length of Inclined Manometer*sin(Angle)
Absolute Pressure at Height h
Go Absolute pressure = Atmospheric pressure+Specific weight of liquids*Height Absolute
Height of Liquid given its Absolute Pressure
Go Height Absolute = (Absolute pressure-Atmospheric pressure)/Specific Weight
Pressure Wave Velocity in Fluids
Go Velocity of pressure wave = sqrt(Bulk Modulus/Mass Density)
Velocity of Fluid given Dynamic Pressure
Go Fluid Velocity = sqrt(Dynamic Pressure*2/Liquid Density)
Dynamic Pressure Head-Pitot Tube
Go Dynamic Pressure Head = (Fluid Velocity^(2))/(2*Acceleration Due To Gravity)
Diameter of Soap Bubble
Go Diameter of Droplet = (8*Surface Tensions)/Pressure Changes
Surface Tension of Liquid Drop given Change in Pressure
Go Surface Tensions = Pressure Changes*Diameter of Droplet/4
Diameter of Droplet given Change in Pressure
Go Diameter of Droplet = 4*Surface Tensions/Pressure Changes
Mass Density given Velocity of Pressure Wave
Go Mass Density = Bulk Modulus/(Velocity of pressure wave^2)
Surface Tension of Soap Bubble
Go Surface Tensions = Pressure Changes*Diameter of Droplet/8
Dynamic Pressure of Fluid
Go Dynamic Pressure = (Liquid Density*Fluid Velocity^(2))/2
Bulk Modulus given Velocity of Pressure Wave
Go Bulk Modulus = Velocity of pressure wave^2*Mass Density
Density of Liquid given Dynamic Pressure
Go Liquid Density = 2*Dynamic Pressure/(Fluid Velocity^2)

Length of Inclined Manometer Formula

Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle))
L = Pa/(γ1*sin(Θ))

Features of an Inclined Manometer?

An inclined manometer is a slightly curved tube with a liquid inside, typically a form of oil mixture. Along the tube's middle portion are graduations. The graduations are commonly hundredths of an inch, depending on the manometer's manufacturer. A user places the manometer in a gas draft flow. The pressure exerted by the flow presses against the internal liquid. The amount of liquid displacement is viewed and measured through the tube's graduations, producing a pressure value.

How to Calculate Length of Inclined Manometer?

Length of Inclined Manometer calculator uses Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle)) to calculate the Length of Inclined Manometer, The Length of Inclined Manometer formula is defined as the length of the Inclined Manometer wing in which the Manometer liquid is present. Length of Inclined Manometer is denoted by L symbol.

How to calculate Length of Inclined Manometer using this online calculator? To use this online calculator for Length of Inclined Manometer, enter Pressure a (Pa), Specific Weight 1 1) & Angle (Θ) and hit the calculate button. Here is how the Length of Inclined Manometer calculation can be explained with given input values -> 77.94844 = 6/(1342*sin(0.610865238197901)).

FAQ

What is Length of Inclined Manometer?
The Length of Inclined Manometer formula is defined as the length of the Inclined Manometer wing in which the Manometer liquid is present and is represented as L = Pa/(γ1*sin(Θ)) or Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle)). Pressure a is pressure at a point a, Specific weight 1 is the specific weight of the fluid 1 & Angle between the inclined manometer tube and surface.
How to calculate Length of Inclined Manometer?
The Length of Inclined Manometer formula is defined as the length of the Inclined Manometer wing in which the Manometer liquid is present is calculated using Length of Inclined Manometer = Pressure a/(Specific Weight 1*sin(Angle)). To calculate Length of Inclined Manometer, you need Pressure a (Pa), Specific Weight 1 1) & Angle (Θ). With our tool, you need to enter the respective value for Pressure a, Specific Weight 1 & Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!