Length of Weld given Maximum Shear Stress-induced in Plane Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld)
L = 1.21*P/(hl*๐œmax)
This formula uses 4 Variables
Variables Used
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Load on Weld - (Measured in Newton) - The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Maximum Shear Stress in Transverse Fillet Weld - (Measured in Pascal) - Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.
STEP 1: Convert Input(s) to Base Unit
Load on Weld: 268.7 Kilonewton --> 268700 Newton (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
Maximum Shear Stress in Transverse Fillet Weld: 79 Newton per Square Millimeter --> 79000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
L = 1.21*P/(hl*๐œmax) --> 1.21*268700/(0.0212*79000000)
Evaluating ... ...
L = 0.194128851206114
STEP 3: Convert Result to Output's Unit
0.194128851206114 Meter -->194.128851206114 Millimeter (Check conversion here)
FINAL ANSWER
194.128851206114 โ‰ˆ 194.1289 Millimeter <-- Length of Weld
(Calculation completed in 00.020 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

16 Transverse Fillet Weld Calculators

Force Acting given Shear Stress-induced in Plane that is Inclined at angle theta
Go Load on Double Transverse Fillet Weld = (Shear Stress in Transverse Fillet Weld*Leg of Weld*Length of Weld)/(sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle)))
Length of Weld given Shear Stress-induced in Plane that is inclined at Angle theta
Go Length of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Leg of Weld)
Shear Stress-Induced in Plane that is inclined at Angle theta to Horizontal
Go Shear Stress in Transverse Fillet Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Leg of Weld*Length of Weld)
Leg of Weld given Shear Stress-induced in Plane
Go Leg of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Length of Weld)
Thickness of Plate given Tensile Stress in Transverse Fillet Weld
Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)
Length of weld given Tensile Stress in Transverse Fillet Weld
Go Length of Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Tensile Stress in Transverse Fillet Weld)
Tensile Stress in Transverse Fillet Weld given Leg of Weld
Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)
Tensile Stress in Transverse Fillet Weld
Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)
Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld
Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld
Permissible Tensile Strength for Double Transverse Fillet Joint
Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Fillet Weld*Length of Weld)
Maximum Shear Stress-induced in Plane that is Inclined at Angle theta
Go Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld)
Length of Weld given Maximum Shear Stress-induced in Plane
Go Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld)
Maximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld
Go Maximum Shear Stress in Transverse Fillet Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Leg of Weld)
Leg of Weld given Allowable Lod per mm Length of Transverse Fillet Weld
Go Leg of Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Maximum Shear Stress in Transverse Fillet Weld)
Leg of Weld given Maximum Shear Stress-induced in Plane
Go Leg of Weld = 1.21*Load per Unit Length in Transverse Fillet Weld/(Maximum Shear Stress in Transverse Fillet Weld)
Allowable Load per mm Length of Transverse Fillet Weld
Go Load per Unit Length in Transverse Fillet Weld = 0.8284*Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld

Length of Weld given Maximum Shear Stress-induced in Plane Formula

Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld)
L = 1.21*P/(hl*๐œmax)

Define Length of Weld?

The leg length is usually designated as the size of the weld. The throat of the weld is the distance from the center of the face to the root of the weld. Typically the depth of the throat should be at least as thick as the thickness of metal you are welding.

How to Calculate Length of Weld given Maximum Shear Stress-induced in Plane?

Length of Weld given Maximum Shear Stress-induced in Plane calculator uses Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld) to calculate the Length of Weld, The length of Weld given Maximum Shear Stress-induced in Plane formula is defined as the size of the weld. The throat of the weld is the distance from the center of the face to the root of the weld. Length of Weld is denoted by L symbol.

How to calculate Length of Weld given Maximum Shear Stress-induced in Plane using this online calculator? To use this online calculator for Length of Weld given Maximum Shear Stress-induced in Plane, enter Load on Weld (P), Leg of Weld (hl) & Maximum Shear Stress in Transverse Fillet Weld (๐œmax) and hit the calculate button. Here is how the Length of Weld given Maximum Shear Stress-induced in Plane calculation can be explained with given input values -> 19412.89 = 1.21*268700/(0.0212*79000000).

FAQ

What is Length of Weld given Maximum Shear Stress-induced in Plane?
The length of Weld given Maximum Shear Stress-induced in Plane formula is defined as the size of the weld. The throat of the weld is the distance from the center of the face to the root of the weld and is represented as L = 1.21*P/(hl*๐œmax) or Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld). The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use, The Leg of Weld is the distance from the joint root to the toe of the weld & Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.
How to calculate Length of Weld given Maximum Shear Stress-induced in Plane?
The length of Weld given Maximum Shear Stress-induced in Plane formula is defined as the size of the weld. The throat of the weld is the distance from the center of the face to the root of the weld is calculated using Length of Weld = 1.21*Load on Weld/(Leg of Weld*Maximum Shear Stress in Transverse Fillet Weld). To calculate Length of Weld given Maximum Shear Stress-induced in Plane, you need Load on Weld (P), Leg of Weld (hl) & Maximum Shear Stress in Transverse Fillet Weld (๐œmax). With our tool, you need to enter the respective value for Load on Weld, Leg of Weld & Maximum Shear Stress in Transverse Fillet Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Length of Weld?
In this formula, Length of Weld uses Load on Weld, Leg of Weld & Maximum Shear Stress in Transverse Fillet Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Length of Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Tensile Stress in Transverse Fillet Weld)
  • Length of Weld = Load on Double Transverse Fillet Weld*sin(Weld Cut Angle)*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Shear Stress in Transverse Fillet Weld*Leg of Weld)
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!