Machining Time for Plunge Grinder Calculator

✖Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.ⓘ Depth of Cut [d_cut]			+10% -10%
✖Feed Rate is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate [f]			+10% -10%
✖Rotational Frequency is defined as the number of rotations per unit time or reciprocal of the time period of one complete rotation.ⓘ Rotational Frequency [ν_rot]			+10% -10%
✖Spark Out Time is the time required in passing the workpiece under the wheel, without resetting the depth of cut.ⓘ Spark Out Time [t_s]			+10% -10%

✖Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.ⓘ Machining Time for Plunge Grinder [t_m]

⎘ Copy

👎

Formula

✖

Machining Time for Plunge Grinder

Formula

`"t"_{"m"} = "d"_{"cut"}/("f"*"ν"_{"rot"})+"t"_{"s"}`

Example

`"8.857143s"="13mm"/("0.70mm/rev"*"10Hz")+"7s"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Machining Time for Plunge Grinder Solution

STEP 0: Pre-Calculation Summary

Formula Used

Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
t_m = d_cut/(f*ν_rot)+t_s
This formula uses 5 Variables

Variables Used

Machining Time - (Measured in Second) - Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.
Depth of Cut - (Measured in Meter) - Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Rotational Frequency - (Measured in Hertz) - Rotational Frequency is defined as the number of rotations per unit time or reciprocal of the time period of one complete rotation.
Spark Out Time - (Measured in Second) - Spark Out Time is the time required in passing the workpiece under the wheel, without resetting the depth of cut.

STEP 1: Convert Input(s) to Base Unit

Depth of Cut: 13 Millimeter --> 0.013 Meter (Check conversion here)
Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Rotational Frequency: 10 Hertz --> 10 Hertz No Conversion Required
Spark Out Time: 7 Second --> 7 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_m = d_cut/(f*ν_rot)+t_s --> 0.013/(0.0007*10)+7

Evaluating ... ...

t_m = 8.85714285714286

STEP 3: Convert Result to Output's Unit

8.85714285714286 Second --> No Conversion Required

FINAL ANSWER

8.85714285714286 ≈ 8.857143 Second <-- Machining Time

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Grinding Time » Machining Time for Plunge Grinder

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 5 Grinding Time Calculators

Spark Out time for Horizontal and Vertical Spindle Surface Grinder given Machining Time

Go Spark Out Time = Machining Time-(Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes))

Machining Time for Horizontal and Vertical Spindle Surface-Grinder

Go Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time

Machining Time for Plunge Grinder

Go Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time

Spark Out time for Cylindrical and Internal Grinder using Machining Time

Go Spark Out Time = Machining Time-(Depth of Cut/Feed Speed)

Machining Time for Cylindrical and Internal Grinder

Go Machining Time = Spark Out Time+Depth of Cut/Feed Speed

Machining Time for Plunge Grinder Formula

Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
t_m = d_cut/(f*ν_rot)+t_s

Plunge Grinding

Plunge Grinding Operation is similar to Cylindrical Grinding Operation except the major difference is that the grinding wheel makes continuous contact with a single point of the object instead of traversing the object.

How to Calculate Machining Time for Plunge Grinder?

Machining Time for Plunge Grinder calculator uses Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time to calculate the Machining Time, Machining Time for Plunge Grinder is the time required to Operate on a Workpiece when grinding operation is down using a single-point cutting tool engagement. Machining Time is denoted by t_m symbol.

How to calculate Machining Time for Plunge Grinder using this online calculator? To use this online calculator for Machining Time for Plunge Grinder, enter Depth of Cut (d_cut), Feed Rate (f), Rotational Frequency (ν_rot) & Spark Out Time (t_s) and hit the calculate button. Here is how the Machining Time for Plunge Grinder calculation can be explained with given input values -> 8.857143 = 0.013/(0.0007*10)+7.

FAQ

What is Machining Time for Plunge Grinder?

Machining Time for Plunge Grinder is the time required to Operate on a Workpiece when grinding operation is down using a single-point cutting tool engagement and is represented as t_m = d_cut/(f*ν_rot)+t_s or Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time. Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction, Feed Rate is defined as the tool's distance travelled during one spindle revolution, Rotational Frequency is defined as the number of rotations per unit time or reciprocal of the time period of one complete rotation & Spark Out Time is the time required in passing the workpiece under the wheel, without resetting the depth of cut.

How to calculate Machining Time for Plunge Grinder?

Machining Time for Plunge Grinder is the time required to Operate on a Workpiece when grinding operation is down using a single-point cutting tool engagement is calculated using Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time. To calculate Machining Time for Plunge Grinder, you need Depth of Cut (d_cut), Feed Rate (f), Rotational Frequency (ν_rot) & Spark Out Time (t_s). With our tool, you need to enter the respective value for Depth of Cut, Feed Rate, Rotational Frequency & Spark Out Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Machining Time?

In this formula, Machining Time uses Depth of Cut, Feed Rate, Rotational Frequency & Spark Out Time. We can use 2 other way(s) to calculate the same, which is/are as follows -

Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time
Machining Time = Spark Out Time+Depth of Cut/Feed Speed

Home

FREE PDFs

🔍 Search