Mass of Fluid Striking Vane per Seconds Calculator

✖Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.ⓘ Specific Weight of Liquid [γ_f]			+10% -10%
✖Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area of Jet [A_Jet]			+10% -10%
✖Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller.ⓘ Absolute Velocity of Issuing Jet [V_absolute]			+10% -10%
✖Velocity of Jet can be described as the movement of the plate in meters per second.ⓘ Velocity of Jet [v]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G]			+10% -10%

✖Fluid Mass is both a property of the fluid and a measure of its resistance to acceleration when a net force is applied.ⓘ Mass of Fluid Striking Vane per Seconds [m_f]

⎘ Copy

👎

Formula

✖

Mass of Fluid Striking Vane per Seconds

Formula

`"m"_{"f"} = ("γ"_{"f"}*"A"_{"Jet"}*("V"_{"absolute"}-"v"))/"G"`

Example

`"0.482652kg"= ("9.81kN/m³"*"1.2m²"*("10.1m/s"-"9.69m/s"))/"10"`

Calculator

LaTeX

Reset

👍

Download Force Exerted by Fluid Jet on Moving Curved Vane Formulas PDF

Mass of Fluid Striking Vane per Seconds Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid
m_f = (γ_f*A_Jet*(V_absolute-v))/G
This formula uses 6 Variables

Variables Used

Fluid Mass - (Measured in Kilogram) - Fluid Mass is both a property of the fluid and a measure of its resistance to acceleration when a net force is applied.
Specific Weight of Liquid - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.
Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Absolute Velocity of Issuing Jet - (Measured in Meter per Second) - Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller.
Velocity of Jet - (Measured in Meter per Second) - Velocity of Jet can be described as the movement of the plate in meters per second.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.

STEP 1: Convert Input(s) to Base Unit

Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Cross Sectional Area of Jet: 1.2 Square Meter --> 1.2 Square Meter No Conversion Required
Absolute Velocity of Issuing Jet: 10.1 Meter per Second --> 10.1 Meter per Second No Conversion Required
Velocity of Jet: 9.69 Meter per Second --> 9.69 Meter per Second No Conversion Required
Specific Gravity of Fluid: 10 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m_f = (γ_f*A_Jet*(V_absolute-v))/G --> (9.81*1.2*(10.1-9.69))/10

Evaluating ... ...

m_f = 0.482652

STEP 3: Convert Result to Output's Unit

0.482652 Kilogram --> No Conversion Required

FINAL ANSWER

0.482652 Kilogram <-- Fluid Mass

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Impact of Free Jets » Force Exerted by Fluid Jet on Moving Curved Vane » Jet Striking a Symmetrical Moving Curved Vane at Centre » Mass of Fluid Striking Vane per Seconds

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< 10+ Jet Striking a Symmetrical Moving Curved Vane at Centre Calculators

Velocity of Vane given Exerted Force by Jet

Go Velocity of Jet = -(sqrt((Force exerted by Jet*Specific Gravity of Fluid)/ (Specific Weight of Liquid*Cross Sectional Area of Jet*(1+cos(Theta))))-Absolute Velocity of Issuing Jet)

Work Done by Jet on Vane per Second

Go Work Done = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet)^2)/ Specific Gravity of Fluid)*(1+cos(Theta))*Velocity of Jet

Absolute Velocity for Force Exerted by Jet in Direction of Flow of Incoming Jet

Go Absolute Velocity of Issuing Jet = (sqrt(Force exerted by Jet*Specific Gravity of Fluid)/(Specific Weight of Liquid*Cross Sectional Area of Jet*(1+cos(Theta))))+Velocity of Jet

Efficiency of Jet

Go Efficiency of Jet = ((2*Velocity of Jet)*(Absolute Velocity of Issuing Jet-Velocity of Jet)^2*(1+cos(Theta)))*100/(Absolute Velocity of Issuing Jet^3)

Velocity of Vane for given Mass of Fluid

Go Velocity of Jet = Absolute Velocity of Issuing Jet-((Fluid Mass*Specific Gravity of Fluid)/(Specific Weight of Liquid*Cross Sectional Area of Jet))

Absolute Velocity for Mass of Fluid Striking Vane per Second

Go Absolute Velocity of Issuing Jet = ((Fluid Mass*Specific Gravity of Fluid)/(Specific Weight of Liquid*Cross Sectional Area of Jet))+Velocity of Jet

Mass of Fluid Striking Vane per Seconds

Go Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid

Kinetic Energy of Jet per Second

Go Kinetic Energy = (Cross Sectional Area of Jet*Fluid Jet Velocity^3)/(2)

Work Done per Second given Efficiency of Wheel

Go Work Done = Efficiency of Jet*Kinetic Energy

Maximum Efficiency

Go Maximum Efficiency = (1/2)*(1+cos(Theta))

Mass of Fluid Striking Vane per Seconds Formula

Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid
m_f = (γ_f*A_Jet*(V_absolute-v))/G

What is meant by Velocity?

The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time.

How to Calculate Mass of Fluid Striking Vane per Seconds?

Mass of Fluid Striking Vane per Seconds calculator uses Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid to calculate the Fluid Mass, The Mass of Fluid Striking Vane per Seconds is defined as ratio of mass of fluid to its volume of fluid. Fluid Mass is denoted by m_f symbol.

How to calculate Mass of Fluid Striking Vane per Seconds using this online calculator? To use this online calculator for Mass of Fluid Striking Vane per Seconds, enter Specific Weight of Liquid (γ_f), Cross Sectional Area of Jet (A_Jet), Absolute Velocity of Issuing Jet (V_absolute), Velocity of Jet (v) & Specific Gravity of Fluid (G) and hit the calculate button. Here is how the Mass of Fluid Striking Vane per Seconds calculation can be explained with given input values -> 0.364932 = (9810*1.2*(10.1-9.69))/10.

FAQ

What is Mass of Fluid Striking Vane per Seconds?

The Mass of Fluid Striking Vane per Seconds is defined as ratio of mass of fluid to its volume of fluid and is represented as m_f = (γ_f*A_Jet*(V_absolute-v))/G or Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid. Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid, Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller, Velocity of Jet can be described as the movement of the plate in meters per second & Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.

How to calculate Mass of Fluid Striking Vane per Seconds?

The Mass of Fluid Striking Vane per Seconds is defined as ratio of mass of fluid to its volume of fluid is calculated using Fluid Mass = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid. To calculate Mass of Fluid Striking Vane per Seconds, you need Specific Weight of Liquid (γ_f), Cross Sectional Area of Jet (A_Jet), Absolute Velocity of Issuing Jet (V_absolute), Velocity of Jet (v) & Specific Gravity of Fluid (G). With our tool, you need to enter the respective value for Specific Weight of Liquid, Cross Sectional Area of Jet, Absolute Velocity of Issuing Jet, Velocity of Jet & Specific Gravity of Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search