Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support Solution

STEP 0: Pre-Calculation Summary
Formula Used
Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia)
δ = (q*(l^4))/(30*E*I)
This formula uses 5 Variables
Variables Used
Deflection of Beam - (Measured in Meter) - Deflection of Beam Deflection is the movement of a beam or node from its original position. It happens due to the forces and loads being applied to the body.
Uniformly Varying Load - (Measured in Newton per Meter) - Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
Elasticity Modulus of Concrete - (Measured in Pascal) - Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.
Area Moment of Inertia - (Measured in Meter⁴) - Area Moment of Inertia is a moment about the centroidal axis without considering mass.
STEP 1: Convert Input(s) to Base Unit
Uniformly Varying Load: 37.5 Kilonewton per Meter --> 37500 Newton per Meter (Check conversion here)
Length of Beam: 5000 Millimeter --> 5 Meter (Check conversion here)
Elasticity Modulus of Concrete: 30000 Megapascal --> 30000000000 Pascal (Check conversion here)
Area Moment of Inertia: 0.0016 Meter⁴ --> 0.0016 Meter⁴ No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
δ = (q*(l^4))/(30*E*I) --> (37500*(5^4))/(30*30000000000*0.0016)
Evaluating ... ...
δ = 0.0162760416666667
STEP 3: Convert Result to Output's Unit
0.0162760416666667 Meter -->16.2760416666667 Millimeter (Check conversion here)
FINAL ANSWER
16.2760416666667 16.27604 Millimeter <-- Deflection of Beam
(Calculation completed in 00.004 seconds)

Credits

Created by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has created this Calculator and 100+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

13 Cantilever Beam Calculators

Deflection at Any Point on Cantilever Beam carrying UDL
Go Deflection of Beam = ((Load per Unit Length*Distance x from Support^2)*(((Distance x from Support^2)+(6*Length of Beam^2)- (4*Distance x from Support*Length of Beam))/(24*Elasticity Modulus of Concrete*Area Moment of Inertia)))
Deflection of Cantilever Beam carrying Point Load at Any Point
Go Deflection of Beam = (Point Load*(Distance from Support A^2)*(3*Length of Beam-Distance from Support A))/(6*Elasticity Modulus of Concrete*Area Moment of Inertia)
Maximum Deflection of Cantilever Beam Carrying UVL with Maximum Intensity at Free End
Go Deflection of Beam = ((11*Uniformly Varying Load*(Length of Beam^4))/(120*Elasticity Modulus of Concrete*Area Moment of Inertia))
Deflection at Any Point on Cantilever Beam carrying Couple Moment at Free End
Go Deflection of Beam = ((Moment of Couple*Distance x from Support^2)/(2*Elasticity Modulus of Concrete *Area Moment of Inertia))
Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support
Go Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia)
Maximum Deflection of Cantilever Beam carrying UDL
Go Deflection of Beam = (Load per Unit Length*(Length of Beam^4))/(8*Elasticity Modulus of Concrete*Area Moment of Inertia)
Slope at Free End of Cantilever Beam Carrying UVL with Maximum Intensity at Fixed End
Go Slope of Beam = ((Uniformly Varying Load*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection of Cantilever Beam with Couple Moment at Free End
Go Deflection of Beam = (Moment of Couple*(Length of Beam^2))/(2*Elasticity Modulus of Concrete*Area Moment of Inertia)
Slope at Free End of Cantilever Beam carrying UDL
Go Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free End of Cantilever Beam Carrying Concentrated Load at Any Point from Fixed End
Go Slope of Beam = ((Point Load*Distance x from Support^2)/(2*Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection of Cantilever Beam carrying Point Load at Free End
Go Deflection of Beam = (Point Load*(Length of Beam^3))/(3*Elasticity Modulus of Concrete*Area Moment of Inertia)
Slope at Free End of Cantilever Beam Carrying Couple at Free End
Go Slope of Beam = ((Moment of Couple*Length of Beam)/(Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free End of Cantilever Beam Carrying Concentrated Load at Free End
Go Slope of Beam = ((Point Load*Length of Beam^2)/(2*Elasticity Modulus of Concrete*Area Moment of Inertia))

Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support Formula

Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia)
δ = (q*(l^4))/(30*E*I)

What is Maximum and Center Deflection of Cantilever Beam carrying Uniformly Varying Load?

The Maximum and Center Deflection of Cantilever Beam carrying Uniformly Varying Load is the maximum degree to which a cantilever beam is displaced under a uniformly varying load

How to Calculate Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support?

Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support calculator uses Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia) to calculate the Deflection of Beam, The Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support formula is defined as (Uniformly Varying Load*(length^4))/(30*Modulus of Elasticity*Area Moment of Inertia). Deflection of Beam is denoted by δ symbol.

How to calculate Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support using this online calculator? To use this online calculator for Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support, enter Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I) and hit the calculate button. Here is how the Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support calculation can be explained with given input values -> 16276.04 = (37500*(5^4))/(30*30000000000*0.0016).

FAQ

What is Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support?
The Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support formula is defined as (Uniformly Varying Load*(length^4))/(30*Modulus of Elasticity*Area Moment of Inertia) and is represented as δ = (q*(l^4))/(30*E*I) or Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia). Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure, Length of Beam is defined as the distance between the supports, Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain & Area Moment of Inertia is a moment about the centroidal axis without considering mass.
How to calculate Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support?
The Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support formula is defined as (Uniformly Varying Load*(length^4))/(30*Modulus of Elasticity*Area Moment of Inertia) is calculated using Deflection of Beam = (Uniformly Varying Load*(Length of Beam^4))/(30*Elasticity Modulus of Concrete*Area Moment of Inertia). To calculate Maximum Deflection of Cantilever Beam carrying UVL with Maximum Intensity at Support, you need Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I). With our tool, you need to enter the respective value for Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Deflection of Beam?
In this formula, Deflection of Beam uses Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia. We can use 7 other way(s) to calculate the same, which is/are as follows -
  • Deflection of Beam = ((Load per Unit Length*Distance x from Support^2)*(((Distance x from Support^2)+(6*Length of Beam^2)- (4*Distance x from Support*Length of Beam))/(24*Elasticity Modulus of Concrete*Area Moment of Inertia)))
  • Deflection of Beam = ((Moment of Couple*Distance x from Support^2)/(2*Elasticity Modulus of Concrete *Area Moment of Inertia))
  • Deflection of Beam = (Point Load*(Distance from Support A^2)*(3*Length of Beam-Distance from Support A))/(6*Elasticity Modulus of Concrete*Area Moment of Inertia)
  • Deflection of Beam = (Point Load*(Length of Beam^3))/(3*Elasticity Modulus of Concrete*Area Moment of Inertia)
  • Deflection of Beam = (Load per Unit Length*(Length of Beam^4))/(8*Elasticity Modulus of Concrete*Area Moment of Inertia)
  • Deflection of Beam = ((11*Uniformly Varying Load*(Length of Beam^4))/(120*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Deflection of Beam = (Moment of Couple*(Length of Beam^2))/(2*Elasticity Modulus of Concrete*Area Moment of Inertia)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!