Mean Coil Diameter given Deflection in Spring Solution

STEP 0: Pre-Calculation Summary
Formula Used
Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3)
D = (δ*G*d^4/(8*P*Na))^(1/3)
This formula uses 6 Variables
Variables Used
Mean Coil Diameter of Spring - (Measured in Meter) - The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.
Deflection of Spring - (Measured in Meter) - Deflection of Spring is how much the length of a spring changes when force is applied or released.
Modulus of rigidity of spring wire - (Measured in Pascal) - Modulus of rigidity of spring wire is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is.
Diameter of spring wire - (Measured in Meter) - Diameter of spring wire is the diameter of the wire of which a spring is made.
Axial Spring Force - (Measured in Newton) - Axial Spring Force is the force acting at the ends of a spring trying to compress or expand it in axial direction.
Active Coils in Spring - Active Coils in Spring is the number of coils or turns of a spring that actually contributes to the load-bearing capacity of the spring. All of the coils that aren't on the ends of a spring.
STEP 1: Convert Input(s) to Base Unit
Deflection of Spring: 18.67 Millimeter --> 0.01867 Meter (Check conversion here)
Modulus of rigidity of spring wire: 86400 Newton per Square Millimeter --> 86400000000 Pascal (Check conversion here)
Diameter of spring wire: 4 Millimeter --> 0.004 Meter (Check conversion here)
Axial Spring Force: 138.2 Newton --> 138.2 Newton No Conversion Required
Active Coils in Spring: 10 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
D = (δ*G*d^4/(8*P*Na))^(1/3) --> (0.01867*86400000000*0.004^4/(8*138.2*10))^(1/3)
Evaluating ... ...
D = 0.0334271999037132
STEP 3: Convert Result to Output's Unit
0.0334271999037132 Meter -->33.4271999037132 Millimeter (Check conversion here)
FINAL ANSWER
33.4271999037132 33.4272 Millimeter <-- Mean Coil Diameter of Spring
(Calculation completed in 00.004 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

24 Stress and Deflections in Springs Calculators

Diameter of Spring Wire given Deflection in Spring
Go Diameter of spring wire = ((8*Axial Spring Force*(Mean Coil Diameter of Spring^3)*Active Coils in Spring)/(Modulus of rigidity of spring wire*Deflection of Spring))^(1/4)
Mean Coil Diameter given Deflection in Spring
Go Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3)
Number of Active Coils given Deflection in Spring
Go Active Coils in Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4)/(8*Axial Spring Force*(Mean Coil Diameter of Spring^3))
Modulus of Rigidity given Deflection in Spring
Go Modulus of rigidity of spring wire = (8*Axial Spring Force*(Mean Coil Diameter of Spring^3)*Active Coils in Spring)/(Deflection of Spring*Diameter of spring wire^4)
Deflection of Spring
Go Deflection of Spring = (8*Axial Spring Force*(Mean Coil Diameter of Spring^3)*Active Coils in Spring)/(Modulus of rigidity of spring wire*Diameter of spring wire^4)
Force Applied on Spring given Deflection in Spring
Go Axial Spring Force = Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*(Mean Coil Diameter of Spring^3)*Active Coils in Spring)
Diameter of Spring Wire given Resultant Stress in Spring
Go Diameter of spring wire = ((Wahl Factor of Spring*8*Axial Spring Force*Mean Coil Diameter of Spring)/(pi*Shear Stress in Spring))^(1/3)
Mean Coil Diameter given Resultant Stress in Spring
Go Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of spring wire^3)/(Wahl Factor of Spring*8*Axial Spring Force)
Force acting on Spring given Resultant Stress
Go Axial Spring Force = Shear Stress in Spring*(pi*Diameter of spring wire^3)/(Wahl Factor of Spring*8*Mean Coil Diameter of Spring)
Resultant Stress in Spring
Go Shear Stress in Spring = Wahl Factor of Spring*(8*Axial Spring Force*Mean Coil Diameter of Spring)/(pi*Diameter of spring wire^3)
Diameter of Spring Wire given Rate of Spring
Go Diameter of spring wire = ((Stiffness of Spring*8*Mean Coil Diameter of Spring^3*Active Coils in Spring)/ (Modulus of rigidity of spring wire))^(1/4)
Mean Coil Diameter given Rate of Spring
Go Mean Coil Diameter of Spring = (Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Stiffness of Spring*Active Coils in Spring))^(1/3)
Modulus of Rigidity given Rate of Spring
Go Modulus of rigidity of spring wire = Stiffness of Spring*(8*Mean Coil Diameter of Spring^3*Active Coils in Spring)/Diameter of spring wire^4
Rate of Spring
Go Stiffness of Spring = Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Mean Coil Diameter of Spring^3*Active Coils in Spring)
Stress Factor of Spring
Go Wahl Factor of Spring = ((4*Spring Index-1)/(4*Spring Index-4))+(0.615/Spring Index)
Shear Stress Correction Factor given Diameter of Spring Wire
Go Shear Stress Correction Factor of Spring = (1+(.5*Diameter of spring wire/Mean Coil Diameter of Spring))
Mean Coil diameter given Shear Stress Correction Factor
Go Mean Coil Diameter of Spring = 0.5*Diameter of spring wire/(Shear Stress Correction Factor of Spring-1)
Diameter of Spring Wire given Shear Stress Correction Factor
Go Diameter of spring wire = (Shear Stress Correction Factor of Spring-1)*Mean Coil Diameter of Spring/.5
Strain Energy Stored in Spring
Go Strain energy in spring = .5*Axial Spring Force*Deflection of Spring
Force Applied on Spring given Strain Energy Stored in Spring
Go Axial Spring Force = 2*Strain energy in spring/Deflection of Spring
Deflection of Spring given Strain Energy Stored
Go Deflection of Spring = 2*Strain energy in spring/Axial Spring Force
Rate of Spring given Deflection
Go Stiffness of Spring = Axial Spring Force/Deflection of Spring
Spring Index given Shear Stress Correction Factor
Go Spring Index = (0.5)/(Shear Stress Correction Factor of Spring-1)
Shear Stress Correction Factor
Go Shear Stress Correction Factor of Spring = (1+(.5/Spring Index))

Mean Coil Diameter given Deflection in Spring Formula

Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3)
D = (δ*G*d^4/(8*P*Na))^(1/3)

Define a Mechanical Spring?

A metal wire spring that functions in a spring mechanism that compresses, extends,rotates, slides, pulls and exerts force when an equal or greater force is applied. A spring mechanism can exert pressure, rotational force or pulling strength in a variety of ways.

How to Calculate Mean Coil Diameter given Deflection in Spring?

Mean Coil Diameter given Deflection in Spring calculator uses Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3) to calculate the Mean Coil Diameter of Spring, The Mean Coil Diameter given Deflection in Spring formula is defined as the average of the inner diameter of the spring and the outer diameter of the spring. Mean Coil Diameter of Spring is denoted by D symbol.

How to calculate Mean Coil Diameter given Deflection in Spring using this online calculator? To use this online calculator for Mean Coil Diameter given Deflection in Spring, enter Deflection of Spring (δ), Modulus of rigidity of spring wire (G), Diameter of spring wire (d), Axial Spring Force (P) & Active Coils in Spring (Na) and hit the calculate button. Here is how the Mean Coil Diameter given Deflection in Spring calculation can be explained with given input values -> 33427.2 = (0.01867*86400000000*0.004^4/(8*138.2*10))^(1/3).

FAQ

What is Mean Coil Diameter given Deflection in Spring?
The Mean Coil Diameter given Deflection in Spring formula is defined as the average of the inner diameter of the spring and the outer diameter of the spring and is represented as D = (δ*G*d^4/(8*P*Na))^(1/3) or Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3). Deflection of Spring is how much the length of a spring changes when force is applied or released, Modulus of rigidity of spring wire is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is, Diameter of spring wire is the diameter of the wire of which a spring is made, Axial Spring Force is the force acting at the ends of a spring trying to compress or expand it in axial direction & Active Coils in Spring is the number of coils or turns of a spring that actually contributes to the load-bearing capacity of the spring. All of the coils that aren't on the ends of a spring.
How to calculate Mean Coil Diameter given Deflection in Spring?
The Mean Coil Diameter given Deflection in Spring formula is defined as the average of the inner diameter of the spring and the outer diameter of the spring is calculated using Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3). To calculate Mean Coil Diameter given Deflection in Spring, you need Deflection of Spring (δ), Modulus of rigidity of spring wire (G), Diameter of spring wire (d), Axial Spring Force (P) & Active Coils in Spring (Na). With our tool, you need to enter the respective value for Deflection of Spring, Modulus of rigidity of spring wire, Diameter of spring wire, Axial Spring Force & Active Coils in Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Mean Coil Diameter of Spring?
In this formula, Mean Coil Diameter of Spring uses Deflection of Spring, Modulus of rigidity of spring wire, Diameter of spring wire, Axial Spring Force & Active Coils in Spring. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of spring wire^3)/(Wahl Factor of Spring*8*Axial Spring Force)
  • Mean Coil Diameter of Spring = 0.5*Diameter of spring wire/(Shear Stress Correction Factor of Spring-1)
  • Mean Coil Diameter of Spring = (Modulus of rigidity of spring wire*Diameter of spring wire^4/(8*Stiffness of Spring*Active Coils in Spring))^(1/3)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!