Peak to Valley Height given Feed and Radius Solution

STEP 0: Pre-Calculation Summary
Formula Used
Peak to Valley Height = (Feed^2)/8*Radius
PVH = (Fcutter^2)/8*rmetal cutting
This formula uses 3 Variables
Variables Used
Peak to Valley Height - (Measured in Meter) - Peak to Valley Height is proposed as a measure for the extent of separation of two chromatographic peaks.
Feed - (Measured in Meter) - Feed is the rate at which a cutter moves through material.
Radius - (Measured in Meter) - Radius is a radial line from the focus to any point of a curve.
STEP 1: Convert Input(s) to Base Unit
Feed: 12 Millimeter --> 0.012 Meter (Check conversion here)
Radius: 6232 Millimeter --> 6.232 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
PVH = (Fcutter^2)/8*rmetal cutting --> (0.012^2)/8*6.232
Evaluating ... ...
PVH = 0.000112176
STEP 3: Convert Result to Output's Unit
0.000112176 Meter -->0.112176 Millimeter (Check conversion here)
FINAL ANSWER
0.112176 Millimeter <-- Peak to Valley Height
(Calculation completed in 00.020 seconds)

Credits

Created by Anirudh Singh
National Institute of Technology (NIT), Jamshedpur
Anirudh Singh has created this Calculator and 300+ more calculators!
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

15 Metal Cutting Calculators

Shear Plane Angle
Go Shear Angle Metal = arctan((Chip Ratio*cos(Rake Angle))/(1-Chip Ratio*sin(Rake Angle)))
Shear Angle
Go Shear Angle Metal = atan(Width*cos(Theta)/(1-Width*sin(Theta)))
Normal Force
Go Normal Force = Centripetal Force*sin(Theta)+Tangential Force*cos(Theta)
Shear Force
Go Shear Force = Centripetal Force*cos(Theta)-Tangential Force*sin(Theta)
Maximum Production Rate
Go Maximum Production Rate = Cost of metal cutting/(((1/Number of Rotations-1)*Tool Changing Time)^Number of Rotations)
Shear Strain in Machining
Go Shear Strain Machining = tan(Shear Angle Plane-Rake Angle)+cos(Shear Angle Plane)
Shear Strain
Go Shear Strain = tan(Shear Angle Metal)+cot(Shear Angle Metal-Rake Angle)
Peak to Valley Height
Go Height = Feed/(tan(Angle A)+cot(Angle B))
Sheer Yield Strength
Go Shear Yield Strength = Width*Feed*cosec(Shear Angle)
Mass Removal Rate
Go Mass Removal Rate = Weight*Current Magnitude/(Valency*96500)
Specific Power Consumption
Go Specific Power Consumption = Force/(Width*Feed)
Cutting Speed given Angular Speed
Go Cutting Speed = pi*Diameter*Angular Speed
Shear Strain given Tangential Displacement and Original Length
Go Shear Strain = Tangential Displacement/Initial Length
Maximum Profit Rate
Go Maximum Profit Rate = 1/(Feed*Rotation Speed)
Peak to Valley Height given Feed and Radius
Go Peak to Valley Height = (Feed^2)/8*Radius

Peak to Valley Height given Feed and Radius Formula

Peak to Valley Height = (Feed^2)/8*Radius
PVH = (Fcutter^2)/8*rmetal cutting

What is peak height of a peakgroup?

If the value of PeakGroup is 1 or 2, the maximum y value of the 1 or 2 points at the point of zero-crossing is taken as the peak height value; if PeakGroup is n is 3 or greater, the average of the next n points is taken as the peak height value.

How to Calculate Peak to Valley Height given Feed and Radius?

Peak to Valley Height given Feed and Radius calculator uses Peak to Valley Height = (Feed^2)/8*Radius to calculate the Peak to Valley Height, Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks. Peak to Valley Height is denoted by PVH symbol.

How to calculate Peak to Valley Height given Feed and Radius using this online calculator? To use this online calculator for Peak to Valley Height given Feed and Radius, enter Feed (Fcutter) & Radius (rmetal cutting) and hit the calculate button. Here is how the Peak to Valley Height given Feed and Radius calculation can be explained with given input values -> 112.176 = (0.012^2)/8*6.232.

FAQ

What is Peak to Valley Height given Feed and Radius?
Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks and is represented as PVH = (Fcutter^2)/8*rmetal cutting or Peak to Valley Height = (Feed^2)/8*Radius. Feed is the rate at which a cutter moves through material & Radius is a radial line from the focus to any point of a curve.
How to calculate Peak to Valley Height given Feed and Radius?
Peak to Valley Height given Feed and Radius is proposed as a measure for the extent of separation of two chromatographic peaks is calculated using Peak to Valley Height = (Feed^2)/8*Radius. To calculate Peak to Valley Height given Feed and Radius, you need Feed (Fcutter) & Radius (rmetal cutting). With our tool, you need to enter the respective value for Feed & Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!