Perimeter of Cut given Stripper Force Solution

STEP 0: Pre-Calculation Summary
Formula Used
Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness)
Lcut = Ps/(K*t)
This formula uses 4 Variables
Variables Used
Perimeter of Cut - (Measured in Meter) - Perimeter of Cut is the perimeter of the punched product.
Stripper Force - (Measured in Newton) - Stripper force is used to separate the punch from the stock.
Stripping Constant - Stripping constant is the empirical constant used to calculate stripping force.
Stock Thickness - (Measured in Meter) - Stock Thickness generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.
STEP 1: Convert Input(s) to Base Unit
Stripper Force: 0.000111 Newton --> 0.000111 Newton No Conversion Required
Stripping Constant: 0.02 --> No Conversion Required
Stock Thickness: 8.99 Millimeter --> 0.00899 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Lcut = Ps/(K*t) --> 0.000111/(0.02*0.00899)
Evaluating ... ...
Lcut = 0.617352614015573
STEP 3: Convert Result to Output's Unit
0.617352614015573 Meter -->617.352614015573 Millimeter (Check conversion here)
FINAL ANSWER
617.352614015573 617.3526 Millimeter <-- Perimeter of Cut
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

3 Stripping Operation Calculators

Thickness of Stock given Stripper Force
Go Stock Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut)
Perimeter of Cut given Stripper Force
Go Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness)
Stripping Force
Go Stripper Force = Stripping Constant*Perimeter of Cut*Stock Thickness

Perimeter of Cut given Stripper Force Formula

Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness)
Lcut = Ps/(K*t)

What is stripping ?

Due to the release of the stored elastic energy in the stock left on the die, the stock tends to grip the punch as the punch moves upward. This necessitates the use of a stripper to separate the punch from the stock. The force required for stripping depends, besides the material, on other factors such as the position and size of the punched hole.

How to Calculate Perimeter of Cut given Stripper Force?

Perimeter of Cut given Stripper Force calculator uses Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness) to calculate the Perimeter of Cut, The Perimeter of cut given stripper force formula is defined as the perimeter of stock which requires the use of stripping force on the die. Perimeter of Cut is denoted by Lcut symbol.

How to calculate Perimeter of Cut given Stripper Force using this online calculator? To use this online calculator for Perimeter of Cut given Stripper Force, enter Stripper Force (Ps), Stripping Constant (K) & Stock Thickness (t) and hit the calculate button. Here is how the Perimeter of Cut given Stripper Force calculation can be explained with given input values -> 616666.7 = 0.000111/(0.02*0.00899).

FAQ

What is Perimeter of Cut given Stripper Force?
The Perimeter of cut given stripper force formula is defined as the perimeter of stock which requires the use of stripping force on the die and is represented as Lcut = Ps/(K*t) or Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness). Stripper force is used to separate the punch from the stock, Stripping constant is the empirical constant used to calculate stripping force & Stock Thickness generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.
How to calculate Perimeter of Cut given Stripper Force?
The Perimeter of cut given stripper force formula is defined as the perimeter of stock which requires the use of stripping force on the die is calculated using Perimeter of Cut = Stripper Force/(Stripping Constant*Stock Thickness). To calculate Perimeter of Cut given Stripper Force, you need Stripper Force (Ps), Stripping Constant (K) & Stock Thickness (t). With our tool, you need to enter the respective value for Stripper Force, Stripping Constant & Stock Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!