Average Power for Most Economical Pipe Diameter for Distribution System Calculator

✖Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing.ⓘ Pipe Diameter for Weir [d_pipe]			+10% -10%
✖Cost for Distribution System indicates the price associated with the making of the product.ⓘ Cost for Distribution System [C_ds]			+10% -10%
✖The initial investment is the amount required to start a business or a project.ⓘ Initial Investment [I]			+10% -10%
✖Average Head is defined as level of water flowing in pipe at different points.ⓘ Average Head [h_Avghead]			+10% -10%
✖Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe.ⓘ Discharge for Economical Pipe [Q_ec]			+10% -10%
✖The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels.ⓘ Darcy Friction Factor [f]			+10% -10%
✖Allowable Unit Stress is the maximum load or stress allowed per unit area of the column.ⓘ Allowable Unit Stress [PA]			+10% -10%

✖Hydroelectric Power is electricity generated by the flow of water through turbines, harnessing the energy of falling or flowing water.ⓘ Average Power for Most Economical Pipe Diameter for Distribution System [P]

⎘ Copy

👎

Formula

✖

Average Power for Most Economical Pipe Diameter for Distribution System

Formula

`"P" = (("d"_{"pipe"}^7)*("C"_{"ds"}*"I"*"h"_{"Avghead"}))/(0.215*((("Q"_{"ec"}^3)*"f"*"PA")))`

Example

`"169.9716W"=((("1.01m")^7)*("1223"*"1890"*"1.51m"))/(0.215*(((("0.16m³/s")^3)*"0.5"*"50N/mm²")))`

Calculator

LaTeX

Reset

👍

Download Flow Over Notches and Weirs Formula PDF

Average Power for Most Economical Pipe Diameter for Distribution System Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress)))
P = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*f*PA)))
This formula uses 8 Variables

Variables Used

Hydroelectric Power - (Measured in Watt) - Hydroelectric Power is electricity generated by the flow of water through turbines, harnessing the energy of falling or flowing water.
Pipe Diameter for Weir - (Measured in Meter) - Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing.
Cost for Distribution System - Cost for Distribution System indicates the price associated with the making of the product.
Initial Investment - The initial investment is the amount required to start a business or a project.
Average Head - (Measured in Meter) - Average Head is defined as level of water flowing in pipe at different points.
Discharge for Economical Pipe - (Measured in Cubic Meter per Second) - Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe.
Darcy Friction Factor - The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels.
Allowable Unit Stress - (Measured in Pascal) - Allowable Unit Stress is the maximum load or stress allowed per unit area of the column.

STEP 1: Convert Input(s) to Base Unit

Pipe Diameter for Weir: 1.01 Meter --> 1.01 Meter No Conversion Required
Cost for Distribution System: 1223 --> No Conversion Required
Initial Investment: 1890 --> No Conversion Required
Average Head: 1.51 Meter --> 1.51 Meter No Conversion Required
Discharge for Economical Pipe: 0.16 Cubic Meter per Second --> 0.16 Cubic Meter per Second No Conversion Required
Darcy Friction Factor: 0.5 --> No Conversion Required
Allowable Unit Stress: 50 Newton per Square Millimeter --> 50000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*f*PA))) --> ((1.01^7)*(1223*1890*1.51))/(0.215*(((0.16^3)*0.5*50000000)))

Evaluating ... ...

P = 169.971617938115

STEP 3: Convert Result to Output's Unit

169.971617938115 Watt --> No Conversion Required

FINAL ANSWER

169.971617938115 ≈ 169.9716 Watt <-- Hydroelectric Power

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Most Economical Pipe » Average Power for Most Economical Pipe Diameter for Distribution System

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 8 Most Economical Pipe Calculators

Discharge for Most Economical Pipe Diameter for Distribution System

Go Discharge for Economical Pipe = (((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(((0.215))*((Darcy Friction Factor*Hydroelectric Power*Allowable Unit Stress))))^(1/3)

Darcy Weisbach Friction Factor for Most Economical Pipe Diameter for Distribution System

Go Darcy Friction Factor = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)))

Allowable Unit Stress given Most Economical Pipe Diameter for Distribution System

Go Allowable Unit Stress = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Hydroelectric Power*Darcy Friction Factor)))

Average Power for Most Economical Pipe Diameter for Distribution System

Go Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress)))

Initial Investment for Most Economical Pipe Diameter of Distribution System

Go Initial Investment = (0.215)*((Darcy Friction Factor*(Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)/(Cost for Distribution System*(Pipe Diameter for Weir^7)*Average Head))

Average Head for Most Economical Pipe Diameter of Distribution System

Go Average Head = (0.215)*((Darcy Friction Factor*(Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)/(Cost for Distribution System*(Pipe Diameter for Weir^7)*Initial Investment))

Most Economical Pipe Diameter for Distribution System of Water

Go Pipe Diameter for Weir = 0.215*((Darcy Friction Factor*(Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)/(Cost for Distribution System*Initial Investment*Average Head))^(1/7)

Cost given Most Economical Pipe Diameter of Distribution System

Go Cost for Distribution System = 0.215*((Darcy Friction Factor*(Discharge for Economical Pipe^3)*Hydroelectric Power*Allowable Unit Stress)/(Initial Investment*(Pipe Diameter for Weir^7)*Average Head))

Average Power for Most Economical Pipe Diameter for Distribution System Formula

What is Economical Section of Pipe ?

A most economical section, the discharge slope of bed and resistance co-efficient is maximum, but in case of circular channels, the area of flow cannot be maintained constant, with change of flow in circular channels of any radios, the wetted area and wetted perimeter changes.

How to Calculate Average Power for Most Economical Pipe Diameter for Distribution System?

Average Power for Most Economical Pipe Diameter for Distribution System calculator uses Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress))) to calculate the Hydroelectric Power, Average Power for Most economical pipe diameter for distribution system is defined as power applied at end to flow. Hydroelectric Power is denoted by P symbol.

How to calculate Average Power for Most Economical Pipe Diameter for Distribution System using this online calculator? To use this online calculator for Average Power for Most Economical Pipe Diameter for Distribution System, enter Pipe Diameter for Weir (d_pipe), Cost for Distribution System (C_ds), Initial Investment (I), Average Head (h_Avghead), Discharge for Economical Pipe (Q_ec), Darcy Friction Factor (f) & Allowable Unit Stress (PA) and hit the calculate button. Here is how the Average Power for Most Economical Pipe Diameter for Distribution System calculation can be explained with given input values -> 179.8641 = ((1.01^7)*(1223*1890*1.51))/(0.215*(((0.16^3)*0.5*50000000))).

FAQ

What is Average Power for Most Economical Pipe Diameter for Distribution System?

Average Power for Most economical pipe diameter for distribution system is defined as power applied at end to flow and is represented as P = ((d_pipe^7)*(C_ds*I*h_Avghead))/(0.215*(((Q_ec^3)*f*PA))) or Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress))). Pipe Diameter for Weiris the diameter of the pipe in which the liquid is flowing, Cost for Distribution System indicates the price associated with the making of the product, The initial investment is the amount required to start a business or a project, Average Head is defined as level of water flowing in pipe at different points, Discharge for Economical Pipe is the discharge calculated from the most Economical Pipe, The Darcy Friction Factor is a dimensionless parameter used to describe the resistance to fluid flow in pipes or channels & Allowable Unit Stress is the maximum load or stress allowed per unit area of the column.

How to calculate Average Power for Most Economical Pipe Diameter for Distribution System?

Average Power for Most economical pipe diameter for distribution system is defined as power applied at end to flow is calculated using Hydroelectric Power = ((Pipe Diameter for Weir^7)*(Cost for Distribution System*Initial Investment*Average Head))/(0.215*(((Discharge for Economical Pipe^3)*Darcy Friction Factor*Allowable Unit Stress))). To calculate Average Power for Most Economical Pipe Diameter for Distribution System, you need Pipe Diameter for Weir (d_pipe), Cost for Distribution System (C_ds), Initial Investment (I), Average Head (h_Avghead), Discharge for Economical Pipe (Q_ec), Darcy Friction Factor (f) & Allowable Unit Stress (PA). With our tool, you need to enter the respective value for Pipe Diameter for Weir, Cost for Distribution System, Initial Investment, Average Head, Discharge for Economical Pipe, Darcy Friction Factor & Allowable Unit Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search