Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 Calculator

✖Radial Distance at Observation Well 1 is the value of radial distance from well 1 when we have prior information of other parameters used.ⓘ Radial Distance at Observation Well 1 [r₁]			+10% -10%
✖Coefficient of Permeability of Soil Particle describes how easily a liquid will move through the soil.ⓘ Coefficient of Permeability of Soil Particle [K_soil]			+10% -10%
✖Depth of water 2 means the depth of the water in 2nd well.ⓘ Depth of Water 2 [h₂]			+10% -10%
✖Depth of water 1 is the depth of water in the 1st considered well.ⓘ Depth of Water 1 [h₁]			+10% -10%
✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%

✖Radial Distance at Well 2 is the value of radial distance from well 2 when we have prior information of other parameters used.ⓘ Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 [R₂]

⎘ Copy

👎

Formula

✖

Radial Distance of Well 2 based on Discharge from Two Wells with Base 10

Formula

`"R"_{"2"} = "r"_{"1"}*10^((1.36*"K"_{"soil"}*("h"_{"2"}^2-"h"_{"1"}^2))/"Q")`

Example

`"1.070017m"="1.07m"*10^((1.36*"0.001cm/s"*(("17.8644m")^2-("17.85m")^2))/"1.01m³/s")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radial Distance at Well 2 = Radial Distance at Observation Well 1*10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)
R₂ = r₁*10^((1.36*K_soil*(h₂^2-h₁^2))/Q)
This formula uses 6 Variables

Variables Used

Radial Distance at Well 2 - (Measured in Meter) - Radial Distance at Well 2 is the value of radial distance from well 2 when we have prior information of other parameters used.
Radial Distance at Observation Well 1 - (Measured in Meter) - Radial Distance at Observation Well 1 is the value of radial distance from well 1 when we have prior information of other parameters used.
Coefficient of Permeability of Soil Particle - (Measured in Meter per Second) - Coefficient of Permeability of Soil Particle describes how easily a liquid will move through the soil.
Depth of Water 2 - (Measured in Meter) - Depth of water 2 means the depth of the water in 2nd well.
Depth of Water 1 - (Measured in Meter) - Depth of water 1 is the depth of water in the 1st considered well.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.

STEP 1: Convert Input(s) to Base Unit

Radial Distance at Observation Well 1: 1.07 Meter --> 1.07 Meter No Conversion Required
Coefficient of Permeability of Soil Particle: 0.001 Centimeter per Second --> 1E-05 Meter per Second (Check conversion here)
Depth of Water 2: 17.8644 Meter --> 17.8644 Meter No Conversion Required
Depth of Water 1: 17.85 Meter --> 17.85 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R₂ = r₁*10^((1.36*K_soil*(h₂^2-h₁^2))/Q) --> 1.07*10^((1.36*1E-05*(17.8644^2-17.85^2))/1.01)

Evaluating ... ...

R₂ = 1.07001706185764

STEP 3: Convert Result to Output's Unit

1.07001706185764 Meter --> No Conversion Required

FINAL ANSWER

1.07001706185764 ≈ 1.070017 Meter <-- Radial Distance at Well 2

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources : Ground Water » Well Hydraulics » Unconfined Aquifer » Radial Distance and Radius of well » Radial Distance of Well 2 based on Discharge from Two Wells with Base 10

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 7 Radial Distance and Radius of well Calculators

Radial Distance of Well 2 based on Discharge of Two Wells under Consideration

Go Radial Distance at Well 2 = Radial Distance at Observation Well 1*exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radial Distance of Well 1 based on Discharge of Two Wells under Consideration

Go Radial Distance 1 = Radial Distance at Observation Well 2/exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of well based on Discharge in Unconfined Aquifer

Go Radius of well = Radius of Influence/exp((pi*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Radius of Well given Discharge and Length of Strainer

Go Radius of well = Radius of Influence/(10^((2.72*Coefficient of Permeability of Soil Particle*Total Drawdown in Well*(Length of strainer+(Total Drawdown in Well/2)))/Discharge))

Radial Distance of Well 2 based on Discharge from Two Wells with Base 10

Go Radial Distance at Well 2 = Radial Distance at Observation Well 1*10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radial Distance of Well 1 based on Discharge from Two Wells with Base 10

Go Radial Distance 1 = Radial Distance at Observation Well 2/10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of well based on Discharge in Unconfined Aquifer with Base 10

Go Radius of well = Radius of Influence/10^((1.36*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 Formula

What is Radial Distance?

The radial distance is also called the radius or radial coordinate. The polar angle may be called colatitude, zenith angle, normal angle, or inclination angle.

How to Calculate Radial Distance of Well 2 based on Discharge from Two Wells with Base 10?

Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 calculator uses Radial Distance at Well 2 = Radial Distance at Observation Well 1*10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge) to calculate the Radial Distance at Well 2, The Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 is defined the value of radial distance of well 2nd when we have prior information of other parameters used. Radial Distance at Well 2 is denoted by R₂ symbol.

How to calculate Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 using this online calculator? To use this online calculator for Radial Distance of Well 2 based on Discharge from Two Wells with Base 10, enter Radial Distance at Observation Well 1 (r₁), Coefficient of Permeability of Soil Particle (K_soil), Depth of Water 2 (h₂), Depth of Water 1 (h₁) & Discharge (Q) and hit the calculate button. Here is how the Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 calculation can be explained with given input values -> 1.070017 = 1.07*10^((1.36*1E-05*(17.8644^2-17.85^2))/1.01).

FAQ

What is Radial Distance of Well 2 based on Discharge from Two Wells with Base 10?

The Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 is defined the value of radial distance of well 2nd when we have prior information of other parameters used and is represented as R₂ = r₁*10^((1.36*K_soil*(h₂^2-h₁^2))/Q) or Radial Distance at Well 2 = Radial Distance at Observation Well 1*10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge). Radial Distance at Observation Well 1 is the value of radial distance from well 1 when we have prior information of other parameters used, Coefficient of Permeability of Soil Particle describes how easily a liquid will move through the soil, Depth of water 2 means the depth of the water in 2nd well, Depth of water 1 is the depth of water in the 1st considered well & Discharge is the rate of flow of a liquid.

How to calculate Radial Distance of Well 2 based on Discharge from Two Wells with Base 10?

The Radial Distance of Well 2 based on Discharge from Two Wells with Base 10 is defined the value of radial distance of well 2nd when we have prior information of other parameters used is calculated using Radial Distance at Well 2 = Radial Distance at Observation Well 1*10^((1.36*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge). To calculate Radial Distance of Well 2 based on Discharge from Two Wells with Base 10, you need Radial Distance at Observation Well 1 (r₁), Coefficient of Permeability of Soil Particle (K_soil), Depth of Water 2 (h₂), Depth of Water 1 (h₁) & Discharge (Q). With our tool, you need to enter the respective value for Radial Distance at Observation Well 1, Coefficient of Permeability of Soil Particle, Depth of Water 2, Depth of Water 1 & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Radial Distance at Well 2?

In this formula, Radial Distance at Well 2 uses Radial Distance at Observation Well 1, Coefficient of Permeability of Soil Particle, Depth of Water 2, Depth of Water 1 & Discharge. We can use 1 other way(s) to calculate the same, which is/are as follows -

Radial Distance at Well 2 = Radial Distance at Observation Well 1*exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Home

FREE PDFs

🔍 Search