Radius at Outlet for Work Done on Wheel per Second Calculator

✖Work done by/on a system is energy transferred by/to the system to/from its surroundings.ⓘ Work Done [w]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G]			+10% -10%
✖Weight of Fluid is the weight of fluid in Newtons or Kilo newton.ⓘ Weight of Fluid [w_f]			+10% -10%
✖The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time.ⓘ Angular Velocity [ω]			+10% -10%
✖The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.ⓘ Final Velocity [v_f]			+10% -10%
✖Radius of wheel is a radial line from the focus to any point of a curve.ⓘ Radius of wheel [r]			+10% -10%
✖Velocity of Jet can be described as the movement of the plate in meters per second.ⓘ Velocity of Jet [v]			+10% -10%

✖Radius of Outlet refers to the distance from the center of the outlet to its outer edge.ⓘ Radius at Outlet for Work Done on Wheel per Second [r_O]

⎘ Copy

👎

Formula

✖

Radius at Outlet for Work Done on Wheel per Second

Formula

`"r"_{"O"} = ((("w"*"G")/("w"_{"f"}*"ω"))-("v"_{"f"}*"r"))/"v"`

Example

`"12.66444m"= ((("3.9KJ"*"10")/("12.36N"*"13rad/s"))-("40m/s"*"3m"))/"9.69m/s"`

Calculator

LaTeX

Reset

👍

Download Torque Exerted on a Wheel with Radial Curved Vanes Formulas PDF

Radius at Outlet for Work Done on Wheel per Second Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet
r_O = (((w*G)/(w_f*ω))-(v_f*r))/v
This formula uses 8 Variables

Variables Used

Radius of Outlet - (Measured in Meter) - Radius of Outlet refers to the distance from the center of the outlet to its outer edge.
Work Done - (Measured in Joule) - Work done by/on a system is energy transferred by/to the system to/from its surroundings.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Weight of Fluid - (Measured in Newton) - Weight of Fluid is the weight of fluid in Newtons or Kilo newton.
Angular Velocity - (Measured in Radian per Second) - The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time.
Final Velocity - (Measured in Meter per Second) - The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.
Radius of wheel - (Measured in Meter) - Radius of wheel is a radial line from the focus to any point of a curve.
Velocity of Jet - (Measured in Meter per Second) - Velocity of Jet can be described as the movement of the plate in meters per second.

STEP 1: Convert Input(s) to Base Unit

Work Done: 3.9 Kilojoule --> 3900 Joule (Check conversion here)
Specific Gravity of Fluid: 10 --> No Conversion Required
Weight of Fluid: 12.36 Newton --> 12.36 Newton No Conversion Required
Angular Velocity: 13 Radian per Second --> 13 Radian per Second No Conversion Required
Final Velocity: 40 Meter per Second --> 40 Meter per Second No Conversion Required
Radius of wheel: 3 Meter --> 3 Meter No Conversion Required
Velocity of Jet: 9.69 Meter per Second --> 9.69 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r_O = (((w*G)/(w_f*ω))-(v_f*r))/v --> (((3900*10)/(12.36*13))-(40*3))/9.69

Evaluating ... ...

r_O = 12.6644423737814

STEP 3: Convert Result to Output's Unit

12.6644423737814 Meter --> No Conversion Required

FINAL ANSWER

12.6644423737814 ≈ 12.66444 Meter <-- Radius of Outlet

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Fundamentals of Fluid Flow » Torque Exerted on a Wheel with Radial Curved Vanes » Radius at Outlet for Work Done on Wheel per Second

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< 21 Torque Exerted on a Wheel with Radial Curved Vanes Calculators

Radius at Inlet for Work Done on Wheel per Second

Go Radius of wheel = (((Work Done*Specific Gravity of Fluid)/ (Weight of Fluid*Angular Velocity))-(Velocity of Jet*Radius of Outlet))/Final Velocity

Radius at Outlet for Work Done on Wheel per Second

Go Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet

Angular Velocity for Work Done on Wheel per Second

Go Angular Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet))

Radius at Outlet for Torque Exerted by Fluid

Go Radius of Outlet = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)-(Final Velocity*Radius of wheel))/Velocity of Jet

Radius at Inlet with Known Torque by Fluid

Go Radius of wheel = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Radius of Outlet))/Final Velocity

Torque Exerted by Fluid

Go Torque Exerted on Wheel = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet)

Initial Velocity for Work Done if Jet leaves in Motion of Wheel

Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Final Velocity))/Final Velocity

Power Delivered to Wheel

Go Power Delivered = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Initial Velocity+Velocity of Jet*Final Velocity)

Initial Velocity given Power Delivered to Wheel

Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity))-(Velocity of Jet))

Velocity for Work Done if there is no Loss of Energy

Go Final Velocity = sqrt(((Work Done*2*Specific Gravity of Fluid)/Weight of Fluid)+Velocity of Jet^2)

Angular Momentum at Outlet

Go Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel

Velocity given Angular Momentum at Outlet

Go Velocity of Jet = (Tangential Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)

Velocity given Angular Momentum at Inlet

Go Final Velocity = (Angular Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)

Angular Momentum at Inlet

Go Angular Momentum = ((Weight of Fluid*Final Velocity)/Specific Gravity of Fluid)*Radius of wheel

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero

Go Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity)

Speed of Wheel given Tangential Velocity at Outlet Tip of Vane

Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of Outlet)

Speed of Wheel given Tangential Velocity at Inlet Tip of Vane

Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of wheel)

Velocity at Point given Efficiency of System

Go Velocity of Jet = sqrt(1-Efficiency of Jet)*Final Velocity

Velocity given Efficiency of System

Go Final Velocity = Velocity of Jet/sqrt(1-Efficiency of Jet)

Efficiency of System

Go Efficiency of Jet = (1-(Velocity of Jet/Final Velocity)^2)

Mass of Fluid Striking Vane per Second

Go Fluid Mass = Weight of Fluid/Specific Gravity of Fluid

Radius at Outlet for Work Done on Wheel per Second Formula

Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet
r_O = (((w*G)/(w_f*ω))-(v_f*r))/v

What is meant by Angular Velocity?

The amount of change of angular displacement of the particle at a given period of time is called angular velocity.

How to Calculate Radius at Outlet for Work Done on Wheel per Second?

Radius at Outlet for Work Done on Wheel per Second calculator uses Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet to calculate the Radius of Outlet, The Radius at Outlet for work done on wheel per second is a straight line extending from the center of a circle or sphere to the circumference or surface. Radius of Outlet is denoted by r_O symbol.

How to calculate Radius at Outlet for Work Done on Wheel per Second using this online calculator? To use this online calculator for Radius at Outlet for Work Done on Wheel per Second, enter Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f), Angular Velocity (ω), Final Velocity (v_f), Radius of wheel (r) & Velocity of Jet (v) and hit the calculate button. Here is how the Radius at Outlet for Work Done on Wheel per Second calculation can be explained with given input values -> 69.02321 = (((3900*10)/(12.36*13))-(40*3))/9.69.

FAQ

What is Radius at Outlet for Work Done on Wheel per Second?

The Radius at Outlet for work done on wheel per second is a straight line extending from the center of a circle or sphere to the circumference or surface and is represented as r_O = (((w*G)/(w_f*ω))-(v_f*r))/v or Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet. Work done by/on a system is energy transferred by/to the system to/from its surroundings, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid, Weight of Fluid is the weight of fluid in Newtons or Kilo newton, The Angular Velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time, The Final Velocity is the speed of a moving body after it has reached its maximum acceleration, Radius of wheel is a radial line from the focus to any point of a curve & Velocity of Jet can be described as the movement of the plate in meters per second.

How to calculate Radius at Outlet for Work Done on Wheel per Second?

The Radius at Outlet for work done on wheel per second is a straight line extending from the center of a circle or sphere to the circumference or surface is calculated using Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet. To calculate Radius at Outlet for Work Done on Wheel per Second, you need Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f), Angular Velocity (ω), Final Velocity (v_f), Radius of wheel (r) & Velocity of Jet (v). With our tool, you need to enter the respective value for Work Done, Specific Gravity of Fluid, Weight of Fluid, Angular Velocity, Final Velocity, Radius of wheel & Velocity of Jet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Radius of Outlet?

In this formula, Radius of Outlet uses Work Done, Specific Gravity of Fluid, Weight of Fluid, Angular Velocity, Final Velocity, Radius of wheel & Velocity of Jet. We can use 1 other way(s) to calculate the same, which is/are as follows -

Radius of Outlet = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)-(Final Velocity*Radius of wheel))/Velocity of Jet

Home

FREE PDFs

🔍 Search