Devyaani Garg
Shiv Nadar University (SNU), Greater Noida
Devyaani Garg has created this Calculator and 50+ more calculators!
Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 500+ more calculators!

11 Other formulas that you can solve using the same Inputs

RMS output voltage of single phase semi-converter with highly inductive load
RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO
RMS output voltage of single phase thyristor converter with resistive load
RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO
Average output voltage of single phase thyristor converter with resistive load
Average output voltage=(Peak input voltage/(2*pi))*(1+cos(Delay angle of thyristor)) GO
Average output voltage of a single phase full converter with highly inductive load
Average output voltage=(2*Peak input voltage/(pi))*(cos(Delay angle of thyristor)) GO
Average output voltage of single phase semi-converter with highly inductive load
Average output voltage=(Peak input voltage/pi)*(1+cos(Delay angle of thyristor)) GO
Normalized output voltage of a single phase semi-converter with highly inductive load
Normalized output voltage=0.5*(1+cos(Delay angle of thyristor)) GO
Normalized voltage of a single phase thyristor converter with resistive load
Normalized output voltage=0.5*(1+cos(Delay angle of thyristor)) GO
Normalized output voltage of single phase full converter with highly inductive load
Normalized output voltage=(cos(Delay angle of thyristor)) GO
Maximum output voltage of a single phase semi-converter with highly inductive load
Maximum output voltage=2*Peak input voltage/pi GO
Maximum output voltage of a single phase full converter with highly inductive load
Maximum output voltage=2*Peak input voltage/pi GO
Maximum output voltage of single phase thyristor converter with resistive load
Maximum output voltage=Peak input voltage/pi GO

6 Other formulas that calculate the same Output

RMS output voltage
RMS output voltage=((3)^0.5)*Peak input voltage*((0.75-(3*Delay angle of thyristor/720)+(0.5*(sin(2*Delay angle of thyristor))))^0.5) GO
RMS output voltage of single phase semi-converter with highly inductive load
RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO
RMS output voltage of single phase thyristor converter with resistive load
RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO
RMS output voltage for continuous load current
RMS output voltage=((3)^0.5)*Peak input voltage*(((1/6)+(0.216/pi)*(cos(2*Delay angle of thyristor)))^0.5) GO
RMS output voltage of a single phase full converter with highly inductive load
RMS output voltage=(Peak input voltage/(2^0.5)) GO
RMS output voltage
RMS output voltage=((Input voltage/2)) GO

RMS output voltage Formula

RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5)
V<sub>rms</sub>=((6)^0.5)*V<sub>m</sub>*((0.25+0.65*(cos(2*α))/pi)^0.5)
More formulas
Apparent power for constant load current GO
Real power for constant load current GO
Total power factor for constant load current GO
Displacement power factor for constant load current GO
Total power factor for continuous load current GO
Real power for constant load current in terms of V<sub>m</sub> GO
Apparent power for constant load current in terms of V<sub>m</sub> GO
Fundamental component of source current for constant load current GO
RMS magnitude of fundamental source current for constant load current GO
Displacement power factor for continuous load current GO
Displacement power factor for constant load current GO
Distortion power factor for constant load current GO
Total power factor for constant load current GO
RMS value of source current for constant load current GO
Peak magnitude of source current for constant load current GO
DC output voltage for first converter GO
DC output voltage of second controller GO
Maximum circulating current GO
Average output voltage for continuous load current GO
Maximum output voltage for continuous load current GO
Normalized average output voltage GO
RMS output voltage for continuous load current GO
Average output voltage GO
Maximum average output voltage GO
Normalized average output voltage GO
RMS output voltage GO
Average output current GO
Average output voltage GO
Maximum average output voltage GO
Normalized average output voltage GO

What is meaning of root mean square?

The root mean square value of a quantity is the square root of the mean value of the squared values of the quantity taken over an interval. AC voltages are always given as RMS values because this allows a sensible comparison to be made with steady DC voltages.

How to Calculate RMS output voltage?

RMS output voltage calculator uses RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5) to calculate the RMS output voltage, The RMS output voltage formula is the root mean square value of the average output voltage of the converter. RMS output voltage and is denoted by Vrms symbol.

How to calculate RMS output voltage using this online calculator? To use this online calculator for RMS output voltage, enter Peak input voltage (Vm) and Delay angle of thyristor (α) and hit the calculate button. Here is how the RMS output voltage calculation can be explained with given input values -> 14.56264 = ((6)^0.5)*10*((0.25+0.65*(cos(2*0.5235987755982))/pi)^0.5).

FAQ

What is RMS output voltage?
The RMS output voltage formula is the root mean square value of the average output voltage of the converter and is represented as Vrms=((6)^0.5)*Vm*((0.25+0.65*(cos(2*α))/pi)^0.5) or RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5). Peak input voltage is the peak value of the sinusoidal input voltage Vmsin(wt) to the converter and Delay angle of thyristor is the angle at which thyristors are triggered after zero crossing.
How to calculate RMS output voltage?
The RMS output voltage formula is the root mean square value of the average output voltage of the converter is calculated using RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5). To calculate RMS output voltage, you need Peak input voltage (Vm) and Delay angle of thyristor (α). With our tool, you need to enter the respective value for Peak input voltage and Delay angle of thyristor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate RMS output voltage?
In this formula, RMS output voltage uses Peak input voltage and Delay angle of thyristor. We can use 6 other way(s) to calculate the same, which is/are as follows -
  • RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5
  • RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5
  • RMS output voltage=(Peak input voltage/(2^0.5))
  • RMS output voltage=((3)^0.5)*Peak input voltage*(((1/6)+(0.216/pi)*(cos(2*Delay angle of thyristor)))^0.5)
  • RMS output voltage=((3)^0.5)*Peak input voltage*((0.75-(3*Delay angle of thyristor/720)+(0.5*(sin(2*Delay angle of thyristor))))^0.5)
  • RMS output voltage=((Input voltage/2))
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!