Safe tensile stress given area of base plate and tensile load Calculator

✖Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Load [P_load]			+10% -10%
✖Area of Base Plate is the area of flat supporting plate or frame at the base of a column.ⓘ Area of Base Plate [A_b]			+10% -10%

✖Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Safe tensile stress given area of base plate and tensile load [σ_t]

⎘ Copy

👎

Formula

✖

Safe tensile stress given area of base plate and tensile load

Formula

`"σ"_{"t"} = "P"_{"load"}/"A"_{"b"}`

Example

`"0.001714MPa"="0.012kN"/"7000mm²"`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Safe tensile stress given area of base plate and tensile load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress = Tensile Load/Area of Base Plate
σ_t = P_load/A_b
This formula uses 3 Variables

Variables Used

Tensile Stress - (Measured in Pascal) - Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Tensile Load - (Measured in Newton) - Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.
Area of Base Plate - (Measured in Square Meter) - Area of Base Plate is the area of flat supporting plate or frame at the base of a column.

STEP 1: Convert Input(s) to Base Unit

Tensile Load: 0.012 Kilonewton --> 12 Newton (Check conversion here)
Area of Base Plate: 7000 Square Millimeter --> 0.007 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P_load/A_b --> 12/0.007

Evaluating ... ...

σ_t = 1714.28571428571

STEP 3: Convert Result to Output's Unit

1714.28571428571 Pascal -->0.00171428571428571 Megapascal (Check conversion here)

FINAL ANSWER

0.00171428571428571 ≈ 0.001714 Megapascal <-- Tensile Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure Of A Riveted Joint » Failure Due To Tearing Of The Plate Between Rivets Of A Row » Safe tensile stress given area of base plate and tensile load

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 8 Failure Due To Tearing Of The Plate Between Rivets Of A Row Calculators

Thickness of Plate given safe tensile load that plate can withstand

Go Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter))

Diameter of rivet given safe tensile load that plate can withstand

Go Rivet Diameter = Pitch of Rivet-(Tensile Load/(Tensile Stress*Thickness of Plate))

Pitch of rivet given safe tensile load that plate can withstand

Go Pitch of Rivet = (Tensile Load/(Tensile Stress*Thickness of Plate))+Rivet Diameter

Safe tensile stress in plate

Go Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate)

Safe tensile load that plate can withstand

Go Tensile Load = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate

Area of plate for given safe tensile load that plate can withstand

Go Area of Base Plate = Tensile Load/Tensile Stress

Safe tensile load that plate can withstand given area of plate

Go Tensile Load = Tensile Stress*Area of Base Plate

Safe tensile stress given area of base plate and tensile load

Go Tensile Stress = Tensile Load/Area of Base Plate

Safe tensile stress given area of base plate and tensile load Formula

Tensile Stress = Tensile Load/Area of Base Plate
σ_t = P_load/A_b

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Safe tensile stress given area of base plate and tensile load?

Safe tensile stress given area of base plate and tensile load calculator uses Tensile Stress = Tensile Load/Area of Base Plate to calculate the Tensile Stress, Safe tensile stress given area of base plate and tensile load is defined as the ratio between the strength of the material and the maximum stress in the part. Tensile Stress is denoted by σ_t symbol.

How to calculate Safe tensile stress given area of base plate and tensile load using this online calculator? To use this online calculator for Safe tensile stress given area of base plate and tensile load, enter Tensile Load (P_load) & Area of Base Plate (A_b) and hit the calculate button. Here is how the Safe tensile stress given area of base plate and tensile load calculation can be explained with given input values -> 1.4E-6 = 12/0.007.

FAQ

What is Safe tensile stress given area of base plate and tensile load?

Safe tensile stress given area of base plate and tensile load is defined as the ratio between the strength of the material and the maximum stress in the part and is represented as σ_t = P_load/A_b or Tensile Stress = Tensile Load/Area of Base Plate. Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen & Area of Base Plate is the area of flat supporting plate or frame at the base of a column.

How to calculate Safe tensile stress given area of base plate and tensile load?

Safe tensile stress given area of base plate and tensile load is defined as the ratio between the strength of the material and the maximum stress in the part is calculated using Tensile Stress = Tensile Load/Area of Base Plate. To calculate Safe tensile stress given area of base plate and tensile load, you need Tensile Load (P_load) & Area of Base Plate (A_b). With our tool, you need to enter the respective value for Tensile Load & Area of Base Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress?

In this formula, Tensile Stress uses Tensile Load & Area of Base Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate)

Home

FREE PDFs

🔍 Search