Shear Force using Strain Energy Calculator

✖Strain Energy is the energy adsorption of material due to strain under an applied load. It is also equal to the work done on a specimen by an external force.ⓘ Strain Energy [U]			+10% -10%
✖Area of Cross-section is a cross-sectional area which we obtain when the same object is cut into two pieces. The area of that particular cross-section is known as the cross-sectional area.ⓘ Area of Cross-Section [A]			+10% -10%
✖Modulus of Rigidity is the measure of the rigidity of the body, given by the ratio of shear stress to shear strain. It is often denoted by G.ⓘ Modulus of Rigidity [G_Torsion]			+10% -10%
✖Length of Member is the measurement or extent of member (beam or column) from end to end.ⓘ Length of Member [L]			+10% -10%

✖Shear Force is the force which causes shear deformation to occur in the shear plane.ⓘ Shear Force using Strain Energy [V]

⎘ Copy

👎

Formula

✖

Shear Force using Strain Energy

Formula

`"V" = sqrt(2*"U"*"A"*"G"_{"Torsion"}/"L")`

Example

`"142.5527kN"=sqrt(2*"136.08N*m"*"5600mm²"*"40GPa"/"3000mm")`

Calculator

LaTeX

Reset

👍

Download Strain Energy Formulas PDF PDF Image

Shear Force using Strain Energy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member)
V = sqrt(2*U*A*G_Torsion/L)
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Shear Force - (Measured in Newton) - Shear Force is the force which causes shear deformation to occur in the shear plane.
Strain Energy - (Measured in Joule) - Strain Energy is the energy adsorption of material due to strain under an applied load. It is also equal to the work done on a specimen by an external force.
Area of Cross-Section - (Measured in Square Meter) - Area of Cross-section is a cross-sectional area which we obtain when the same object is cut into two pieces. The area of that particular cross-section is known as the cross-sectional area.
Modulus of Rigidity - (Measured in Pascal) - Modulus of Rigidity is the measure of the rigidity of the body, given by the ratio of shear stress to shear strain. It is often denoted by G.
Length of Member - (Measured in Meter) - Length of Member is the measurement or extent of member (beam or column) from end to end.

STEP 1: Convert Input(s) to Base Unit

Strain Energy: 136.08 Newton Meter --> 136.08 Joule (Check conversion here)
Area of Cross-Section: 5600 Square Millimeter --> 0.0056 Square Meter (Check conversion here)
Modulus of Rigidity: 40 Gigapascal --> 40000000000 Pascal (Check conversion here)
Length of Member: 3000 Millimeter --> 3 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = sqrt(2*U*A*G_Torsion/L) --> sqrt(2*136.08*0.0056*40000000000/3)

Evaluating ... ...

V = 142552.727087208

STEP 3: Convert Result to Output's Unit

142552.727087208 Newton -->142.552727087208 Kilonewton (Check conversion here)

FINAL ANSWER

142.552727087208 ≈ 142.5527 Kilonewton <-- Shear Force

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Strain Energy » Strain Energy in Structural Members » Shear Force using Strain Energy

Credits

Created by Rudrani Tidke

Cummins College of Engineering for Women (CCEW), Pune

Rudrani Tidke has created this Calculator and 100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< 19 Strain Energy in Structural Members Calculators

Strain Energy in Torsion given Angle of Twist

Go Strain Energy = (Polar Moment of Inertia*Modulus of Rigidity*(Angle of Twist*(pi/180))^2)/(2*Length of Member)

Strain Energy for Pure Bending when Beam rotates in One End

Go Strain Energy = (Young's Modulus*Area Moment of Inertia*((Angle of Twist*(pi/180))^2)/(2*Length of Member))

Bending Moment using Strain Energy

Go Bending Moment = sqrt(Strain Energy*(2*Young's Modulus*Area Moment of Inertia)/Length of Member)

Torque given Strain Energy in Torsion

Go Torque SOM = sqrt(2*Strain Energy*Polar Moment of Inertia*Modulus of Rigidity/Length of Member)

Shear Force using Strain Energy

Go Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member)

Strain Energy in Shear given Shear Deformation

Go Strain Energy = (Area of Cross-Section*Modulus of Rigidity*(Shear Deformation^2))/(2*Length of Member)

Length over which Deformation takes place using Strain Energy

Go Length of Member = (Strain Energy*(2*Young's Modulus*Area Moment of Inertia)/(Bending Moment^2))

Modulus of Elasticity with given Strain Energy

Go Young's Modulus = (Length of Member*(Bending Moment^2)/(2*Strain Energy*Area Moment of Inertia))

Moment of Inertia using Strain Energy

Go Area Moment of Inertia = Length of Member*((Bending Moment^2)/(2*Strain Energy*Young's Modulus))

Strain Energy in Bending

Go Strain Energy = ((Bending Moment^2)*Length of Member/(2*Young's Modulus*Area Moment of Inertia))

Strain Energy in Torsion given Polar MI and Shear Modulus of Elasticity

Go Strain Energy = (Torque SOM^2)*Length of Member/(2*Polar Moment of Inertia*Modulus of Rigidity)

Shear Modulus of Elasticity given Strain Energy in Torsion

Go Modulus of Rigidity = (Torque SOM^2)*Length of Member/(2*Polar Moment of Inertia*Strain Energy)

Polar Moment of Inertia given Strain Energy in Torsion

Go Polar Moment of Inertia = (Torque SOM^2)*Length of Member/(2*Strain Energy*Modulus of Rigidity)

Shear Modulus of Elasticity given Strain Energy in Shear

Go Modulus of Rigidity = (Shear Force^2)*Length of Member/(2*Area of Cross-Section*Strain Energy)

Shear Area given Strain Energy in Shear

Go Area of Cross-Section = (Shear Force^2)*Length of Member/(2*Strain Energy*Modulus of Rigidity)

Strain Energy in Shear

Go Strain Energy = (Shear Force^2)*Length of Member/(2*Area of Cross-Section*Modulus of Rigidity)

Length over which Deformation takes place given Strain Energy in Torsion

Go Length of Member = (2*Strain Energy*Polar Moment of Inertia*Modulus of Rigidity)/Torque SOM^2

Length over which Deformation takes place given Strain Energy in Shear

Go Length of Member = 2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/(Shear Force^2)

Stress using Hook's Law

Go Direct Stress = Young's Modulus*Lateral Strain

Shear Force using Strain Energy Formula

Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member)
V = sqrt(2*U*A*G_Torsion/L)

What is meant by Shear Load?

Shear loads are defined as forces applied to a specimen tangent to the loading axis, but not through the center of the sample.

How does Shear Deformation take place?

Shearing forces cause shearing deformation. An element subject to shear does not change in length alone but undergoes a change in shape, this is how a shear deformation takes place.

How to Calculate Shear Force using Strain Energy?

Shear Force using Strain Energy calculator uses Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member) to calculate the Shear Force, The Shear Force using Strain Energy formula is defined as a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. Shear Force is denoted by V symbol.

How to calculate Shear Force using Strain Energy using this online calculator? To use this online calculator for Shear Force using Strain Energy, enter Strain Energy (U), Area of Cross-Section (A), Modulus of Rigidity (G_Torsion) & Length of Member (L) and hit the calculate button. Here is how the Shear Force using Strain Energy calculation can be explained with given input values -> 0.142553 = sqrt(2*136.08*0.0056*40000000000/3).

FAQ

What is Shear Force using Strain Energy?

The Shear Force using Strain Energy formula is defined as a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force and is represented as V = sqrt(2*U*A*G_Torsion/L) or Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member). Strain Energy is the energy adsorption of material due to strain under an applied load. It is also equal to the work done on a specimen by an external force, Area of Cross-section is a cross-sectional area which we obtain when the same object is cut into two pieces. The area of that particular cross-section is known as the cross-sectional area, Modulus of Rigidity is the measure of the rigidity of the body, given by the ratio of shear stress to shear strain. It is often denoted by G & Length of Member is the measurement or extent of member (beam or column) from end to end.

How to calculate Shear Force using Strain Energy?

The Shear Force using Strain Energy formula is defined as a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force is calculated using Shear Force = sqrt(2*Strain Energy*Area of Cross-Section*Modulus of Rigidity/Length of Member). To calculate Shear Force using Strain Energy, you need Strain Energy (U), Area of Cross-Section (A), Modulus of Rigidity (G_Torsion) & Length of Member (L). With our tool, you need to enter the respective value for Strain Energy, Area of Cross-Section, Modulus of Rigidity & Length of Member and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search