Shear Stress Component given Saturated Unit Weight Calculator

✖Saturated Unit Weight of Soil is the ratio of mass of saturated soil sample to total volume.ⓘ Saturated Unit Weight of Soil [γ_saturated]			+10% -10%
✖Depth of Prism is the length of prism along z direction.ⓘ Depth of Prism [z]			+10% -10%
✖Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.ⓘ Angle of Inclination to Horizontal in Soil [i]			+10% -10%

✖Shear Stress in Soil Mechanics is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress Component given Saturated Unit Weight [ζ_soil]

⎘ Copy

👎

Formula

✖

Shear Stress Component given Saturated Unit Weight

Formula

`"ζ"_{"soil"} = ("γ"_{"saturated"}*"z"*cos(("i"*pi)/180)*sin(("i"*pi)/180))`

Example

`"0.695229kN/m²"=("11.89kN/m³"*"3m"*cos(("64°"*pi)/180)*sin(("64°"*pi)/180))`

Calculator

LaTeX

Reset

👍

Download Seepage Analysis Formulas PDF

Shear Stress Component given Saturated Unit Weight Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180)*sin((Angle of Inclination to Horizontal in Soil*pi)/180))
ζ_soil = (γ_saturated*z*cos((i*pi)/180)*sin((i*pi)/180))
This formula uses 1 Constants, 2 Functions, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Shear Stress in Soil Mechanics - (Measured in Pascal) - Shear Stress in Soil Mechanics is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Saturated Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Saturated Unit Weight of Soil is the ratio of mass of saturated soil sample to total volume.
Depth of Prism - (Measured in Meter) - Depth of Prism is the length of prism along z direction.
Angle of Inclination to Horizontal in Soil - (Measured in Radian) - Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.

STEP 1: Convert Input(s) to Base Unit

Saturated Unit Weight of Soil: 11.89 Kilonewton per Cubic Meter --> 11890 Newton per Cubic Meter (Check conversion here)
Depth of Prism: 3 Meter --> 3 Meter No Conversion Required
Angle of Inclination to Horizontal in Soil: 64 Degree --> 1.11701072127616 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ζ_soil = (γ_saturated*z*cos((i*pi)/180)*sin((i*pi)/180)) --> (11890*3*cos((1.11701072127616*pi)/180)*sin((1.11701072127616*pi)/180))

Evaluating ... ...

ζ_soil = 695.228824589117

STEP 3: Convert Result to Output's Unit

695.228824589117 Pascal -->0.695228824589118 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

0.695228824589118 ≈ 0.695229 Kilonewton per Square Meter <-- Shear Stress in Soil Mechanics

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Seepage Analysis » Steady State Seepage Analysis Along The Slopes » Shear Stress Component given Saturated Unit Weight

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 25 Steady State Seepage Analysis Along The Slopes Calculators

Factor of Safety for Cohesive Soil given Saturated Unit Weight

Go Factor of Safety in Soil Mechanics = (Effective Cohesion+(Submerged Unit Weight*Depth of Prism*tan((Angle of Internal Friction))*(cos((Angle of Inclination to Horizontal in Soil)))^2))/(Saturated Unit Weight in Newton per Cubic Meter*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil))*sin((Angle of Inclination to Horizontal in Soil)))

Shear Strength given Submerged Unit Weight

Go Shear Strength in KN per Cubic Meter = (Shear Stress in Soil Mechanics*Submerged Unit Weight in KN per Cubic Meter*tan((Angle of Internal Friction*pi)/180))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil*pi)/180))

Submerged Unit Weight given Factor of Safety

Go Submerged Unit Weight in KN per Cubic Meter = Factor of Safety in Soil Mechanics/((tan((Angle of Internal Friction of Soil*pi)/180))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil*pi)/180)))

Factor of Safety given Submerged Unit Weight

Go Factor of Safety in Soil Mechanics = (Submerged Unit Weight in KN per Cubic Meter*tan((Angle of Internal Friction of Soil*pi)/180))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil*pi)/180))

Submerged Unit Weight given Shear Strength

Go Submerged Unit Weight in KN per Cubic Meter = (Shear Strength in KN per Cubic Meter/Shear Stress in Soil Mechanics)/((tan((Angle of Internal Friction of Soil)))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil))))

Shear Stress given Submerged Unit Weight

Go Shear Stress in Soil Mechanics = Shear Strength in KN per Cubic Meter/((Submerged Unit Weight in KN per Cubic Meter*tan((Angle of Internal Friction)))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil))))

Shear Stress Component given Saturated Unit Weight

Go Shear Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180)*sin((Angle of Inclination to Horizontal in Soil*pi)/180))

Submerged Unit Weight given Upward Force

Go Submerged Unit Weight in KN per Cubic Meter = (Normal Stress in Soil Mechanics-Upward Force in Seepage Analysis)/(Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Normal Stress Component given Submerged Unit Weight and Depth of Prism

Go Normal Stress in Soil Mechanics = Upward Force in Seepage Analysis+(Submerged Unit Weight in KN per Cubic Meter*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Upward Force due to Seepage Water given Submerged Unit Weight

Go Upward Force in Seepage Analysis = Normal Stress in Soil Mechanics-(Submerged Unit Weight in KN per Cubic Meter*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Effective Normal Stress given Saturated Unit Weight

Go Effective Normal Stress in Soil Mechanics = ((Saturated Unit Weight of Soil-Unit Weight of Water)*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Unit Weight of Water given Effective Normal Stress

Go Unit Weight of Water = Saturated Unit Weight of Soil-(Effective Normal Stress in Soil Mechanics/(Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2))

Inclined Length of Prism given Saturated Unit Weight

Go Inclined Length of Prism = Weight of Prism in Soil Mechanics/(Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180))

Weight of Soil Prism given Saturated Unit Weight

Go Weight of Prism in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*Inclined Length of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180))

Effective Normal Stress given Submerged Unit Weight

Go Effective Normal Stress in Soil Mechanics = (Submerged Unit Weight in KN per Cubic Meter*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Submerged Unit Weight given Effective Normal Stress

Go Submerged Unit Weight in KN per Cubic Meter = Effective Normal Stress in Soil Mechanics/(Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Effective Normal Stress given Factor of Safety

Go Effective Normal Stress in Soil Mechanics = Factor of Safety in Soil Mechanics/((tan((Angle of Internal Friction of Soil*pi)/180))/Shear Stress in Soil Mechanics)

Factor of Safety given Effective Normal Stress

Go Factor of Safety in Soil Mechanics = (Effective Normal Stress in Soil Mechanics*tan((Angle of Internal Friction*pi)/180))/Shear Stress in Soil Mechanics

Vertical Stress on Prism given Saturated Unit Weight

Go Vertical Stress at a Point in Kilopascal = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180))

Normal Stress Component given Saturated Unit Weight

Go Normal Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Unit Weight of Water given Upward Force due to Seepage Water

Go Unit Weight of Water = Upward Force in Seepage Analysis/(Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Upward Force due to Seepage Water

Go Upward Force in Seepage Analysis = (Unit Weight of Water*Depth of Prism*(cos((Angle of Inclination to Horizontal in Soil*pi)/180))^2)

Effective Normal Stress given Upward Force due to Seepage Water

Go Effective Normal Stress in Soil Mechanics = Normal Stress in Soil Mechanics-Upward Force in Seepage Analysis

Upward Force due to Seepage Water given Effective Normal Stress

Go Upward Force in Seepage Analysis = Normal Stress in Soil Mechanics-Effective Normal Stress in Soil Mechanics

Normal Stress Component given Effective Normal Stress

Go Normal Stress in Soil Mechanics = Effective Normal Stress in Soil Mechanics+Upward Force in Seepage Analysis

Shear Stress Component given Saturated Unit Weight Formula

What is Shear Stress?

Shear stress, often denoted by τ (Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. Normal stress, on the other hand.

How to Calculate Shear Stress Component given Saturated Unit Weight?

Shear Stress Component given Saturated Unit Weight calculator uses Shear Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180)*sin((Angle of Inclination to Horizontal in Soil*pi)/180)) to calculate the Shear Stress in Soil Mechanics, The Shear Stress Component given Saturated Unit Weight is defined as the value of shear stress when we have prior information of other parameters used. Shear Stress in Soil Mechanics is denoted by ζ_soil symbol.

How to calculate Shear Stress Component given Saturated Unit Weight using this online calculator? To use this online calculator for Shear Stress Component given Saturated Unit Weight, enter Saturated Unit Weight of Soil (γ_saturated), Depth of Prism (z) & Angle of Inclination to Horizontal in Soil (i) and hit the calculate button. Here is how the Shear Stress Component given Saturated Unit Weight calculation can be explained with given input values -> 0.000695 = (11890*3*cos((1.11701072127616*pi)/180)*sin((1.11701072127616*pi)/180)).

FAQ

What is Shear Stress Component given Saturated Unit Weight?

The Shear Stress Component given Saturated Unit Weight is defined as the value of shear stress when we have prior information of other parameters used and is represented as ζ_soil = (γ_saturated*z*cos((i*pi)/180)*sin((i*pi)/180)) or Shear Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180)*sin((Angle of Inclination to Horizontal in Soil*pi)/180)). Saturated Unit Weight of Soil is the ratio of mass of saturated soil sample to total volume, Depth of Prism is the length of prism along z direction & Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.

How to calculate Shear Stress Component given Saturated Unit Weight?

The Shear Stress Component given Saturated Unit Weight is defined as the value of shear stress when we have prior information of other parameters used is calculated using Shear Stress in Soil Mechanics = (Saturated Unit Weight of Soil*Depth of Prism*cos((Angle of Inclination to Horizontal in Soil*pi)/180)*sin((Angle of Inclination to Horizontal in Soil*pi)/180)). To calculate Shear Stress Component given Saturated Unit Weight, you need Saturated Unit Weight of Soil (γ_saturated), Depth of Prism (z) & Angle of Inclination to Horizontal in Soil (i). With our tool, you need to enter the respective value for Saturated Unit Weight of Soil, Depth of Prism & Angle of Inclination to Horizontal in Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shear Stress in Soil Mechanics?

In this formula, Shear Stress in Soil Mechanics uses Saturated Unit Weight of Soil, Depth of Prism & Angle of Inclination to Horizontal in Soil. We can use 1 other way(s) to calculate the same, which is/are as follows -

Shear Stress in Soil Mechanics = Shear Strength in KN per Cubic Meter/((Submerged Unit Weight in KN per Cubic Meter*tan((Angle of Internal Friction)))/(Saturated Unit Weight of Soil*tan((Angle of Inclination to Horizontal in Soil))))

Home

FREE PDFs

🔍 Search