Shear Stress given Velocity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance)
𝜏 = (μviscosity*Vmean/D)-dp|dr*(0.5*D-R)
This formula uses 6 Variables
Variables Used
Shear Stress - (Measured in Pascal) - Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.
Mean Velocity - (Measured in Meter per Second) - Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.
Distance between plates - Distance between plates is the length of the space between two points.
Pressure Gradient - (Measured in Newton per Cubic Meter) - Pressure Gradient is the change in pressure with respect to radial distance of element.
Horizontal Distance - (Measured in Meter) - Horizontal Distance denotes the instantaneous horizontal distance cover by an object in a projectile motion.
STEP 1: Convert Input(s) to Base Unit
Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)
Mean Velocity: 10.1 Meter per Second --> 10.1 Meter per Second No Conversion Required
Distance between plates: 2.9 --> No Conversion Required
Pressure Gradient: 17 Newton per Cubic Meter --> 17 Newton per Cubic Meter No Conversion Required
Horizontal Distance: 4 Meter --> 4 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
𝜏 = (μviscosity*Vmean/D)-dp|dr*(0.5*D-R) --> (1.02*10.1/2.9)-17*(0.5*2.9-4)
Evaluating ... ...
𝜏 = 46.9024137931034
STEP 3: Convert Result to Output's Unit
46.9024137931034 Pascal --> No Conversion Required
FINAL ANSWER
46.9024137931034 46.90241 Pascal <-- Shear Stress
(Calculation completed in 00.004 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

12 Laminar Flow between Parallel Flat Plates, one plate moving and other at rest, Couette Flow Calculators

Dynamic Viscosity given Flow Velocity
Go Dynamic Viscosity = ((0.5*Pressure Gradient*(Distance between plates*Horizontal Distance-Horizontal Distance^2)))/((Mean Velocity*Horizontal Distance/Width)-Flow velocity)
Flow Velocity of Section
Go Flow velocity = (Mean Velocity*Horizontal Distance/Width)-(0.5*Pressure Gradient*(Distance between plates*Horizontal Distance-Horizontal Distance^2))/Dynamic Viscosity
Pressure Gradient given Flow Velocity
Go Pressure Gradient = ((Mean Velocity*Horizontal Distance/Width)-Flow velocity)/(((0.5*(Width*Horizontal Distance-Horizontal Distance^2))/Dynamic Viscosity))
Mean Velocity of Flow given Flow Velocity
Go Flow velocity = (Mean Velocity*Horizontal Distance/Width)-(0.5*Pressure Gradient*(Width*Horizontal Distance-Horizontal Distance^2))/Dynamic Viscosity
Mean Velocity of Flow given Shear Stress
Go Mean Velocity = (Shear Stress+Pressure Gradient*(0.5*Distance between plates-Horizontal Distance))*(Distance between plates/Dynamic Viscosity)
Pressure Gradient given Shear Stress
Go Pressure Gradient = ((Dynamic Viscosity*Mean Velocity/Distance between plates)-Shear Stress)/(0.5*Distance between plates-Horizontal Distance)
Shear Stress given Velocity
Go Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance)
Dynamic Viscosity given Stress
Go Dynamic Viscosity = (Shear Stress+Pressure Gradient*(0.5*Distance between plates-Horizontal Distance))*(Width/Mean Velocity)
Distance between Plates given Flow Velocity with No Pressure Gradient
Go Distance between plates = Mean Velocity*Horizontal Distance/Flow velocity
Horizontal Distance given Flow Velocity with No Pressure Gradient
Go Horizontal Distance = Flow velocity*Width/Mean Velocity
Mean Velocity of Flow given Flow Velocity with No Pressure Gradient
Go Mean Velocity = Distance between plates*Horizontal Distance
Flow Velocity given No Pressure Gradient
Go Flow velocity = (Mean Velocity*Horizontal Distance)

Shear Stress given Velocity Formula

Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance)
𝜏 = (μviscosity*Vmean/D)-dp|dr*(0.5*D-R)

What is Pressure Gradient?

Pressure gradient is a physical quantity that describes in which direction and at what rate the pressure increases the most rapidly around a particular location. The pressure gradient is a dimensional quantity expressed in units of pascals per metre.

How to Calculate Shear Stress given Velocity?

Shear Stress given Velocity calculator uses Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance) to calculate the Shear Stress, The Shear Stress given Velocity is defined as the resistance developed due to motion of fluid on to near the boundary of the pipe. Shear Stress is denoted by 𝜏 symbol.

How to calculate Shear Stress given Velocity using this online calculator? To use this online calculator for Shear Stress given Velocity, enter Dynamic Viscosity viscosity), Mean Velocity (Vmean), Distance between plates (D), Pressure Gradient (dp|dr) & Horizontal Distance (R) and hit the calculate button. Here is how the Shear Stress given Velocity calculation can be explained with given input values -> 46.90241 = (1.02*10.1/2.9)-17*(0.5*2.9-4).

FAQ

What is Shear Stress given Velocity?
The Shear Stress given Velocity is defined as the resistance developed due to motion of fluid on to near the boundary of the pipe and is represented as 𝜏 = (μviscosity*Vmean/D)-dp|dr*(0.5*D-R) or Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance). The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied, Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T, Distance between plates is the length of the space between two points, Pressure Gradient is the change in pressure with respect to radial distance of element & Horizontal Distance denotes the instantaneous horizontal distance cover by an object in a projectile motion.
How to calculate Shear Stress given Velocity?
The Shear Stress given Velocity is defined as the resistance developed due to motion of fluid on to near the boundary of the pipe is calculated using Shear Stress = (Dynamic Viscosity*Mean Velocity/Distance between plates)-Pressure Gradient*(0.5*Distance between plates-Horizontal Distance). To calculate Shear Stress given Velocity, you need Dynamic Viscosity viscosity), Mean Velocity (Vmean), Distance between plates (D), Pressure Gradient (dp|dr) & Horizontal Distance (R). With our tool, you need to enter the respective value for Dynamic Viscosity, Mean Velocity, Distance between plates, Pressure Gradient & Horizontal Distance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!