Slope at Free Ends of Simply Supported Beam carrying UDL Solution

STEP 0: Pre-Calculation Summary
Formula Used
Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
θ = ((w'*l^3)/(24*E*I))
This formula uses 5 Variables
Variables Used
Slope of Beam - (Measured in Radian) - The Slope of Beam is the angle between deflected beam to the actual beam at the same point.
Load per Unit Length - (Measured in Newton per Meter) - Load per Unit Length is the load distributed per unit meter.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
Elasticity Modulus of Concrete - (Measured in Pascal) - Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.
Area Moment of Inertia - (Measured in Meter⁴) - Area Moment of Inertia is a moment about the centroidal axis without considering mass.
STEP 1: Convert Input(s) to Base Unit
Load per Unit Length: 24 Kilonewton per Meter --> 24000 Newton per Meter (Check conversion here)
Length of Beam: 5000 Millimeter --> 5 Meter (Check conversion here)
Elasticity Modulus of Concrete: 30000 Megapascal --> 30000000000 Pascal (Check conversion here)
Area Moment of Inertia: 0.0016 Meter⁴ --> 0.0016 Meter⁴ No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
θ = ((w'*l^3)/(24*E*I)) --> ((24000*5^3)/(24*30000000000*0.0016))
Evaluating ... ...
θ = 0.00260416666666667
STEP 3: Convert Result to Output's Unit
0.00260416666666667 Radian --> No Conversion Required
FINAL ANSWER
0.00260416666666667 0.002604 Radian <-- Slope of Beam
(Calculation completed in 00.004 seconds)

Credits

Acharya Nagarjuna University College of Engg & Technology (ANU), Guntur
krupa sheela pattapu has created this Calculator and 25+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

15 Simply Supported Beam Calculators

Deflection at Any Point on Simply Supported Beam carrying UDL
Go Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))
Deflection at Any Point on Simply Supported carrying Couple Moment at Right End
Go Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))
Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support
Go Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support
Go Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection of Simply Supported Beam carrying Triangular Load with Max Intensity at Center
Go Deflection of Beam = (((Uniformly Varying Load*(Length of Beam^4))/(120*Elasticity Modulus of Concrete*Area Moment of Inertia)))
Maximum and Center Deflection of Simply Supported Beam carrying UDL over its Entire Length
Go Deflection of Beam = (5*Load per Unit Length*(Length of Beam^4))/(384*Elasticity Modulus of Concrete*Area Moment of Inertia)
Maximum Deflection of Simply Supported Beam carrying Couple Moment at Right End
Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(15.5884*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Left End of Simply Supported Beam carrying UVL with Maximum Intensity at Right End
Go Slope of Beam = ((7*Uniformly Varying Load*Length of Beam^3)/(360*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Right End of Simply Supported Beam carrying UVL with Maximum Intensity at Right End
Go Slope of Beam = ((Uniformly Varying Load*Length of Beam^3)/(45*Elasticity Modulus of Concrete*Area Moment of Inertia))
Center Deflection of Simply Supported Beam carrying Couple Moment at Right End
Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free Ends of Simply Supported Beam carrying UDL
Go Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum and Center Deflection of Simply Supported Beam carrying Point Load at Center
Go Deflection of Beam = (Point Load*(Length of Beam^3))/(48*Elasticity Modulus of Concrete*Area Moment of Inertia)
Slope at Right End of Simply Supported Beam carrying Couple at Right End
Go Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Left End of Simply Supported Beam carrying Couple at Right End
Go Slope of Beam = ((Moment of Couple*Length of Beam)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free Ends of Simply Supported Beam carrying Concentrated Load at Center
Go Slope of Beam = ((Point Load*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))

Slope at Free Ends of Simply Supported Beam carrying UDL Formula

Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
θ = ((w'*l^3)/(24*E*I))

What is Slope of a Beam?

The Slope at any section in a deflected beam is defined as the angle in radians which the tangent at the section makes with the original axis of the beam.

What is Deflection of A Beam?

The Deflection at any point on the axis of the beam is the distance between its position before and after loading.

How to Calculate Slope at Free Ends of Simply Supported Beam carrying UDL?

Slope at Free Ends of Simply Supported Beam carrying UDL calculator uses Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia)) to calculate the Slope of Beam, The Slope at Free Ends of Simply Supported Beam carrying UDL formula is defined as angle between deflected beam to the actual beam at the same point due to UDL. Slope of Beam is denoted by θ symbol.

How to calculate Slope at Free Ends of Simply Supported Beam carrying UDL using this online calculator? To use this online calculator for Slope at Free Ends of Simply Supported Beam carrying UDL, enter Load per Unit Length (w'), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I) and hit the calculate button. Here is how the Slope at Free Ends of Simply Supported Beam carrying UDL calculation can be explained with given input values -> 0.002604 = ((24000*5^3)/(24*30000000000*0.0016)).

FAQ

What is Slope at Free Ends of Simply Supported Beam carrying UDL?
The Slope at Free Ends of Simply Supported Beam carrying UDL formula is defined as angle between deflected beam to the actual beam at the same point due to UDL and is represented as θ = ((w'*l^3)/(24*E*I)) or Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia)). Load per Unit Length is the load distributed per unit meter, Length of Beam is defined as the distance between the supports, Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain & Area Moment of Inertia is a moment about the centroidal axis without considering mass.
How to calculate Slope at Free Ends of Simply Supported Beam carrying UDL?
The Slope at Free Ends of Simply Supported Beam carrying UDL formula is defined as angle between deflected beam to the actual beam at the same point due to UDL is calculated using Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia)). To calculate Slope at Free Ends of Simply Supported Beam carrying UDL, you need Load per Unit Length (w'), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I). With our tool, you need to enter the respective value for Load per Unit Length, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Slope of Beam?
In this formula, Slope of Beam uses Load per Unit Length, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Slope of Beam = ((Point Load*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Slope of Beam = ((Moment of Couple*Length of Beam)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Slope of Beam = ((7*Uniformly Varying Load*Length of Beam^3)/(360*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Slope of Beam = ((Uniformly Varying Load*Length of Beam^3)/(45*Elasticity Modulus of Concrete*Area Moment of Inertia))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!