Sparking Time from Frequency of Cutting Solution

STEP 0: Pre-Calculation Summary
Formula Used
Sparking Time = 1/Frequency of Cutting-Charging Time
ts = 1/fcut-tc
This formula uses 3 Variables
Variables Used
Sparking Time - (Measured in Second) - Sparking time is defined as the time for which a spark is sustained.
Frequency of Cutting - (Measured in Hertz) - Frequency of Cutting refers to how often a machine or tool is engaged to trim, shape, or remove material from a workpiece during the production process.
Charging Time - (Measured in Second) - Charging time is the time required to charge a particular device.
STEP 1: Convert Input(s) to Base Unit
Frequency of Cutting: 0.005 Cycle per Second --> 0.005 Hertz (Check conversion here)
Charging Time: 199.8 Second --> 199.8 Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ts = 1/fcut-tc --> 1/0.005-199.8
Evaluating ... ...
ts = 0.199999999999989
STEP 3: Convert Result to Output's Unit
0.199999999999989 Second --> No Conversion Required
FINAL ANSWER
0.199999999999989 0.2 Second <-- Sparking Time
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has verified this Calculator and 200+ more calculators!

6 Frequency of cutting Calculators

Frequency of Cutting from Capacitance and Inductance
Go Frequency of Cutting = 0.03/sqrt(Inductance*Capacitance)
Inductance of Circuit from Cutting Frequency
Go Inductance = ((0.03/Frequency of Cutting)^2)/Capacitance
Capacitance of Circuit
Go Capacitance = ((0.03/Frequency of Cutting)^2)/Inductance
Frequency of Cutting using Charging and Sparking Time
Go Frequency of Cutting = 1/(Sparking Time+Charging Time)
Sparking Time from Frequency of Cutting
Go Sparking Time = 1/Frequency of Cutting-Charging Time
Charging Time from Cutting Frequency
Go Charging Time = 1/Frequency of Cutting-Sparking Time

Sparking Time from Frequency of Cutting Formula

Sparking Time = 1/Frequency of Cutting-Charging Time
ts = 1/fcut-tc

How the spark is produced in Electric Discharge Machining ?

A typical circuit used for supplying the power to an EDM machine is named as the relaxation circuit. The circuit consists of a DC power source, which charges the capacitor ‘C’ across a resistance ‘Rc’. Initially when the capacitor is in the uncharged condition, when the power supply is on with a voltage of Vo, a heavy current, ic, will flow in the circuit as shown to charge the capacitor.The relaxation circuit as explained above was used in the early EDM machines. They are limited to the low material removal rates for fine finish, which limits its application. This can be explained from the fact that the time spent on charging the capacitor is quite large during which time, no machining can actually take place. Thus the material removal rates are low.

How to Calculate Sparking Time from Frequency of Cutting?

Sparking Time from Frequency of Cutting calculator uses Sparking Time = 1/Frequency of Cutting-Charging Time to calculate the Sparking Time, Sparking time from frequency of cutting formula is defined as the time for which a spark can be sustained before breaking and generation of a new spark. Sparking Time is denoted by ts symbol.

How to calculate Sparking Time from Frequency of Cutting using this online calculator? To use this online calculator for Sparking Time from Frequency of Cutting, enter Frequency of Cutting (fcut) & Charging Time (tc) and hit the calculate button. Here is how the Sparking Time from Frequency of Cutting calculation can be explained with given input values -> 199.9 = 1/0.005-199.8.

FAQ

What is Sparking Time from Frequency of Cutting?
Sparking time from frequency of cutting formula is defined as the time for which a spark can be sustained before breaking and generation of a new spark and is represented as ts = 1/fcut-tc or Sparking Time = 1/Frequency of Cutting-Charging Time. Frequency of Cutting refers to how often a machine or tool is engaged to trim, shape, or remove material from a workpiece during the production process & Charging time is the time required to charge a particular device.
How to calculate Sparking Time from Frequency of Cutting?
Sparking time from frequency of cutting formula is defined as the time for which a spark can be sustained before breaking and generation of a new spark is calculated using Sparking Time = 1/Frequency of Cutting-Charging Time. To calculate Sparking Time from Frequency of Cutting, you need Frequency of Cutting (fcut) & Charging Time (tc). With our tool, you need to enter the respective value for Frequency of Cutting & Charging Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!