Specific weight for force exerted by jet on vane in x direction Calculator

✖Force Exerted by Fluid Jet in X is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity.ⓘ Force Exerted by Fluid Jet in X [F_x]			+10% -10%
✖The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration due to Gravity [g]			+10% -10%
✖Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area of Jet [A_Jet]			+10% -10%
✖Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.ⓘ Fluid Jet Velocity [v_jet]			+10% -10%
✖Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.ⓘ Theta [θ]			+10% -10%
✖Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.ⓘ Angle between Jet and Plate [∠D]			+10% -10%

✖Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.ⓘ Specific weight for force exerted by jet on vane in x direction [γ_f]

⎘ Copy

👎

Formula

✖

Specific weight for force exerted by jet on vane in x direction

Formula

`"γ"_{"f"} = ("F"_{"x"}*"g")/("A"_{"Jet"}*("v"_{"jet"}^2)*(cos("θ")+cos("∠D")))`

Example

`"9.822273kN/m³"=("320N"*"9.8m/s²")/("1.2m²"*(("12m/s")^2)*(cos("30°")+cos("11°")))`

Calculator

LaTeX

Reset

👍

Download Impact of Free Jets Formula PDF PDF Image

Specific weight for force exerted by jet on vane in x direction Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate)))
γ_f = (F_x*g)/(A_Jet*(v_jet^2)*(cos(θ)+cos(∠D)))
This formula uses 1 Functions, 7 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Specific Weight of Liquid - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.
Force Exerted by Fluid Jet in X - (Measured in Newton) - Force Exerted by Fluid Jet in X is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity.
Acceleration due to Gravity - (Measured in Meter per Square Second) - The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Fluid Jet Velocity - (Measured in Meter per Second) - Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.
Theta - (Measured in Radian) - Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
Angle between Jet and Plate - (Measured in Radian) - Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

STEP 1: Convert Input(s) to Base Unit

Force Exerted by Fluid Jet in X: 320 Newton --> 320 Newton No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Cross Sectional Area of Jet: 1.2 Square Meter --> 1.2 Square Meter No Conversion Required
Fluid Jet Velocity: 12 Meter per Second --> 12 Meter per Second No Conversion Required
Theta: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Angle between Jet and Plate: 11 Degree --> 0.19198621771934 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_f = (F_x*g)/(A_Jet*(v_jet^2)*(cos(θ)+cos(∠D))) --> (320*9.8)/(1.2*(12^2)*(cos(0.5235987755982)+cos(0.19198621771934)))

Evaluating ... ...

γ_f = 9.82227301472033

STEP 3: Convert Result to Output's Unit

9822.27301472033 Newton per Cubic Meter -->9.82227301472033 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

9.82227301472033 ≈ 9.822273 Kilonewton per Cubic Meter <-- Specific Weight of Liquid

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Impact of Free Jets » Force Exerted by Fluid Jet on Stationary Curved Vane » Jet Striking an Unsymmetrical Stationary Curved Vane Tangentially at one of the Tips » Specific weight for force exerted by jet on vane in x direction

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 8 Jet Striking an Unsymmetrical Stationary Curved Vane Tangentially at one of the Tips Calculators

Velocity given Force Exerted by Jet on Vane in Y Direction

Go Fluid Jet Velocity = sqrt((Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*((sin(Theta))-sin(Angle between Jet and Plate))))

Velocity for force exerted by jet on vane in x direction

Go Fluid Jet Velocity = sqrt(Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*(cos(Theta)+cos(Angle between Jet and Plate)))

Specific Weight given Force Exerted by Jet on Vane in Y Direction

Go Specific Weight of Liquid = (Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Cross Sectional Area of Jet*Fluid Jet Velocity^2*((sin(Theta))-sin(Angle between Jet and Plate)))

Specific weight for force exerted by jet on vane in x direction

Go Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate)))

Force exerted by jet on vane in x direction

Go Force Exerted by Fluid Jet in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Fluid Jet Velocity^2))/Acceleration due to Gravity)*(cos(Theta)+cos(Angle between Jet and Plate))

Force Exerted by Jet on Vane in Y-Direction

Go Force Exerted by Fluid Jet in Y = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/Acceleration due to Gravity)*((sin(Theta))-sin(Angle between Jet and Plate))

Area of Cross Section for given Force Exerted by Jet on Vane in Y Direction

Go Cross Sectional Area of Jet = (Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Fluid Jet Velocity^2*(sin(Theta)-sin(Angle between Jet and Plate)))

Area of Cross Section for Force Exerted by Jet on Vane in x Direction

Go Cross Sectional Area of Jet = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Specific Weight of Liquid*Fluid Jet Velocity^2*(cos(Theta)+cos(Angle between Jet and Plate)))

Specific weight for force exerted by jet on vane in x direction Formula

What is meant by Velocity?

The Velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time.

What is impact of jet on vanes?

Turbines rotate due to force exerted by one or more water jets that are directed tangentially onto the turbine's vanes or buckets. The impact of the water on the vanes generates a torque on the wheel, causing it to rotate and to generate electricity.

How to Calculate Specific weight for force exerted by jet on vane in x direction?

Specific weight for force exerted by jet on vane in x direction calculator uses Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate))) to calculate the Specific Weight of Liquid, The Specific weight for force exerted by jet on vane in x direction is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity. Specific Weight of Liquid is denoted by γ_f symbol.

How to calculate Specific weight for force exerted by jet on vane in x direction using this online calculator? To use this online calculator for Specific weight for force exerted by jet on vane in x direction, enter Force Exerted by Fluid Jet in X (F_x), Acceleration due to Gravity (g), Cross Sectional Area of Jet (A_Jet), Fluid Jet Velocity (v_jet), Theta (θ) & Angle between Jet and Plate (∠D) and hit the calculate button. Here is how the Specific weight for force exerted by jet on vane in x direction calculation can be explained with given input values -> 8.2E-6 = (320*9.8)/(1.2*(12^2)*(cos(0.5235987755982)+cos(0.19198621771934))).

FAQ

What is Specific weight for force exerted by jet on vane in x direction?

The Specific weight for force exerted by jet on vane in x direction is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity and is represented as γ_f = (F_x*g)/(A_Jet*(v_jet^2)*(cos(θ)+cos(∠D))) or Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate))). Force Exerted by Fluid Jet in X is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity, The Acceleration due to Gravity is acceleration gained by an object because of gravitational force, Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area, Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint & Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

How to calculate Specific weight for force exerted by jet on vane in x direction?

The Specific weight for force exerted by jet on vane in x direction is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity is calculated using Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate))). To calculate Specific weight for force exerted by jet on vane in x direction, you need Force Exerted by Fluid Jet in X (F_x), Acceleration due to Gravity (g), Cross Sectional Area of Jet (A_Jet), Fluid Jet Velocity (v_jet), Theta (θ) & Angle between Jet and Plate (∠D). With our tool, you need to enter the respective value for Force Exerted by Fluid Jet in X, Acceleration due to Gravity, Cross Sectional Area of Jet, Fluid Jet Velocity, Theta & Angle between Jet and Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Specific Weight of Liquid?

In this formula, Specific Weight of Liquid uses Force Exerted by Fluid Jet in X, Acceleration due to Gravity, Cross Sectional Area of Jet, Fluid Jet Velocity, Theta & Angle between Jet and Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Specific Weight of Liquid = (Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Cross Sectional Area of Jet*Fluid Jet Velocity^2*((sin(Theta))-sin(Angle between Jet and Plate)))

Home

FREE PDFs

🔍 Search