Storage at End of Time Interval in Modified Pul's Method Calculator

✖Inflow at the Beginning of Time Interval is the amount of water entering a body of water at the start of the time.ⓘ Inflow at the Beginning of Time Interval [I₁]			+10% -10%
✖Inflow at the End of Time Interval is the amount of water entering a body of water at the end of the time.ⓘ Inflow at the End of Time Interval [I₂]			+10% -10%
✖Time Interval is the amount of time required for the change from the initial to the final state.ⓘ Time Interval [Δt]			+10% -10%
✖Storage at the Beginning of Time Interval is the amount of water stored in reservoirs within the system of the hydrological cycle at the start of the time. Make Validation type greater than zero.ⓘ Storage at the Beginning of Time Interval [S₁]			+10% -10%
✖Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.ⓘ Outflow at the Beginning of Time Interval [Q₁]			+10% -10%
✖Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.ⓘ Outflow at the End of Time Interval [Q₂]			+10% -10%

✖Storage at the End of Time Interval is the amount of water stored in reservoirs within the system of hydrological cycle at the end of the time.ⓘ Storage at End of Time Interval in Modified Pul's Method [S₂]

⎘ Copy

👎

Formula

✖

Storage at End of Time Interval in Modified Pul's Method

Formula

`"S"_{"2"} = (("I"_{"1"}+"I"_{"2"})/2)*"Δt"+("S"_{"1"}-("Q"_{"1"}*"Δt"/2))-("Q"_{"2"}*"Δt"/2)`

Example

`"35"=(("55m³/s"+"65m³/s")/2)*"5s"+("15"-("48m³/s"*"5s"/2))-("64m³/s"*"5s"/2)`

Calculator

LaTeX

Reset

👍

Download Hydrologic Routing Formulas PDF

Storage at End of Time Interval in Modified Pul's Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2)
S₂ = ((I₁+I₂)/2)*Δt+(S₁-(Q₁*Δt/2))-(Q₂*Δt/2)
This formula uses 7 Variables

Variables Used

Storage at the End of Time Interval - Storage at the End of Time Interval is the amount of water stored in reservoirs within the system of hydrological cycle at the end of the time.
Inflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Inflow at the Beginning of Time Interval is the amount of water entering a body of water at the start of the time.
Inflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Inflow at the End of Time Interval is the amount of water entering a body of water at the end of the time.
Time Interval - (Measured in Second) - Time Interval is the amount of time required for the change from the initial to the final state.
Storage at the Beginning of Time Interval - Storage at the Beginning of Time Interval is the amount of water stored in reservoirs within the system of the hydrological cycle at the start of the time. Make Validation type greater than zero.
Outflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.
Outflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.

STEP 1: Convert Input(s) to Base Unit

Inflow at the Beginning of Time Interval: 55 Cubic Meter per Second --> 55 Cubic Meter per Second No Conversion Required
Inflow at the End of Time Interval: 65 Cubic Meter per Second --> 65 Cubic Meter per Second No Conversion Required
Time Interval: 5 Second --> 5 Second No Conversion Required
Storage at the Beginning of Time Interval: 15 --> No Conversion Required
Outflow at the Beginning of Time Interval: 48 Cubic Meter per Second --> 48 Cubic Meter per Second No Conversion Required
Outflow at the End of Time Interval: 64 Cubic Meter per Second --> 64 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S₂ = ((I₁+I₂)/2)*Δt+(S₁-(Q₁*Δt/2))-(Q₂*Δt/2) --> ((55+65)/2)*5+(15-(48*5/2))-(64*5/2)

Evaluating ... ...

S₂ = 35

STEP 3: Convert Result to Output's Unit

35 --> No Conversion Required

FINAL ANSWER

35 <-- Storage at the End of Time Interval

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Flood Routing » Hydrologic Routing » Hydrologic Storage Routing » Modified Pul's Method » Storage at End of Time Interval in Modified Pul's Method

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 2 Modified Pul's Method Calculators

Storage at Beginning of Time Interval in Modified Pul's Method

Go Storage at the Beginning of Time Interval = (Storage at the End of Time Interval+(Outflow at the End of Time Interval*Time Interval/2))-((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Outflow at the Beginning of Time Interval*Time Interval/2)

Storage at End of Time Interval in Modified Pul's Method

Go Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2)

Storage at End of Time Interval in Modified Pul's Method Formula

What is Spillway?

A Spillway is a structure used to provide the controlled release of flows from a dam or levee into a downstream area, typically the riverbed of the dammed river itself.

How to Calculate Storage at End of Time Interval in Modified Pul's Method?

Storage at End of Time Interval in Modified Pul's Method calculator uses Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2) to calculate the Storage at the End of Time Interval, The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another. Storage at the End of Time Interval is denoted by S₂ symbol.

How to calculate Storage at End of Time Interval in Modified Pul's Method using this online calculator? To use this online calculator for Storage at End of Time Interval in Modified Pul's Method, enter Inflow at the Beginning of Time Interval (I₁), Inflow at the End of Time Interval (I₂), Time Interval (Δt), Storage at the Beginning of Time Interval (S₁), Outflow at the Beginning of Time Interval (Q₁) & Outflow at the End of Time Interval (Q₂) and hit the calculate button. Here is how the Storage at End of Time Interval in Modified Pul's Method calculation can be explained with given input values -> 35 = ((55+65)/2)*5+(15-(48*5/2))-(64*5/2).

FAQ

What is Storage at End of Time Interval in Modified Pul's Method?

The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another and is represented as S₂ = ((I₁+I₂)/2)*Δt+(S₁-(Q₁*Δt/2))-(Q₂*Δt/2) or Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2). Inflow at the Beginning of Time Interval is the amount of water entering a body of water at the start of the time, Inflow at the End of Time Interval is the amount of water entering a body of water at the end of the time, Time Interval is the amount of time required for the change from the initial to the final state, Storage at the Beginning of Time Interval is the amount of water stored in reservoirs within the system of the hydrological cycle at the start of the time. Make Validation type greater than zero, Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time & Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.

How to calculate Storage at End of Time Interval in Modified Pul's Method?

The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another is calculated using Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2). To calculate Storage at End of Time Interval in Modified Pul's Method, you need Inflow at the Beginning of Time Interval (I₁), Inflow at the End of Time Interval (I₂), Time Interval (Δt), Storage at the Beginning of Time Interval (S₁), Outflow at the Beginning of Time Interval (Q₁) & Outflow at the End of Time Interval (Q₂). With our tool, you need to enter the respective value for Inflow at the Beginning of Time Interval, Inflow at the End of Time Interval, Time Interval, Storage at the Beginning of Time Interval, Outflow at the Beginning of Time Interval & Outflow at the End of Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search