Surface to Volume Ratio of Toroid Solution

STEP 0: Pre-Calculation Summary
Formula Used
Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid)
RA/V = (PCross Section/ACross Section)
This formula uses 3 Variables
Variables Used
Surface to Volume Ratio of Toroid - (Measured in 1 per Meter) - Surface to Volume Ratio of Toroid is defined as the numerical ratio of the total surface area of a Toroid to the volume of the Toroid.
Cross Sectional Perimeter of Toroid - (Measured in Meter) - Cross Sectional Perimeter of Toroid is the total length of the boundary of the cross-section of the Toroid.
Cross Sectional Area of Toroid - (Measured in Square Meter) - Cross Sectional Area of Toroid is the amount of two-dimensional space occupied by the cross-section of the Toroid.
STEP 1: Convert Input(s) to Base Unit
Cross Sectional Perimeter of Toroid: 30 Meter --> 30 Meter No Conversion Required
Cross Sectional Area of Toroid: 50 Square Meter --> 50 Square Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
RA/V = (PCross Section/ACross Section) --> (30/50)
Evaluating ... ...
RA/V = 0.6
STEP 3: Convert Result to Output's Unit
0.6 1 per Meter --> No Conversion Required
FINAL ANSWER
0.6 1 per Meter <-- Surface to Volume Ratio of Toroid
(Calculation completed in 00.004 seconds)

Credits

Created by Shweta Patil
Walchand College of Engineering (WCE), Sangli
Shweta Patil has created this Calculator and 2500+ more calculators!
Verified by Mona Gladys
St Joseph's College (SJC), Bengaluru
Mona Gladys has verified this Calculator and 1800+ more calculators!

3 Surface to Volume Ratio Calculators

Surface to Volume Ratio of Toroid Sector
Go Surface to Volume Ratio of Toroid Sector = ((2*pi*Radius of Toroid*Cross Sectional Perimeter of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))+(2*Cross Sectional Area of Toroid))/(2*pi*Radius of Toroid*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))
Surface to Volume Ratio of Toroid given Total Surface Area
Go Surface to Volume Ratio of Toroid = (Total Surface Area of Toroid/(2*pi*Radius of Toroid*Cross Sectional Area of Toroid))
Surface to Volume Ratio of Toroid
Go Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid)

Surface to Volume Ratio of Toroid Formula

Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid)
RA/V = (PCross Section/ACross Section)

What is Toroid?

In geometry, a Toroid is a surface of revolution with a hole in the middle. The axis of revolution passes through the hole and so does not intersect the surface. For example, when a rectangle is rotated around an axis parallel to one of its edges, then a hollow rectangle-section ring is produced. If the revolved figure is a circle, then the object is called a torus.

How to Calculate Surface to Volume Ratio of Toroid?

Surface to Volume Ratio of Toroid calculator uses Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid) to calculate the Surface to Volume Ratio of Toroid, Surface to Volume Ratio of Toroid formula is defined as the numerical ratio of the total surface area of a Toroid to the volume of the Toroid. Surface to Volume Ratio of Toroid is denoted by RA/V symbol.

How to calculate Surface to Volume Ratio of Toroid using this online calculator? To use this online calculator for Surface to Volume Ratio of Toroid, enter Cross Sectional Perimeter of Toroid (PCross Section) & Cross Sectional Area of Toroid (ACross Section) and hit the calculate button. Here is how the Surface to Volume Ratio of Toroid calculation can be explained with given input values -> 0.6 = (30/50).

FAQ

What is Surface to Volume Ratio of Toroid?
Surface to Volume Ratio of Toroid formula is defined as the numerical ratio of the total surface area of a Toroid to the volume of the Toroid and is represented as RA/V = (PCross Section/ACross Section) or Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid). Cross Sectional Perimeter of Toroid is the total length of the boundary of the cross-section of the Toroid & Cross Sectional Area of Toroid is the amount of two-dimensional space occupied by the cross-section of the Toroid.
How to calculate Surface to Volume Ratio of Toroid?
Surface to Volume Ratio of Toroid formula is defined as the numerical ratio of the total surface area of a Toroid to the volume of the Toroid is calculated using Surface to Volume Ratio of Toroid = (Cross Sectional Perimeter of Toroid/Cross Sectional Area of Toroid). To calculate Surface to Volume Ratio of Toroid, you need Cross Sectional Perimeter of Toroid (PCross Section) & Cross Sectional Area of Toroid (ACross Section). With our tool, you need to enter the respective value for Cross Sectional Perimeter of Toroid & Cross Sectional Area of Toroid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Surface to Volume Ratio of Toroid?
In this formula, Surface to Volume Ratio of Toroid uses Cross Sectional Perimeter of Toroid & Cross Sectional Area of Toroid. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Surface to Volume Ratio of Toroid = (Total Surface Area of Toroid/(2*pi*Radius of Toroid*Cross Sectional Area of Toroid))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!