Temperature given Thermal Voltage and Electric Elementary Charge Solution

STEP 0: Pre-Calculation Summary
Formula Used
Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ])
T = (Vt*e)/([BoltZ])
This formula uses 1 Constants, 3 Variables
Constants Used
[BoltZ] - Boltzmann constant Value Taken As 1.38064852E-23
Variables Used
Temperature of Liquid - (Measured in Kelvin) - The temperature of liquid is the degree or intensity of heat present in a liquid.
Thermal Voltage - (Measured in Volt) - Thermal Voltage is the voltage produced within the p-n junction.
Elementary Charge - (Measured in Coulomb) - The Elementary charge is the electric charge carried out by a single proton or single elctron.
STEP 1: Convert Input(s) to Base Unit
Thermal Voltage: 25.85 Volt --> 25.85 Volt No Conversion Required
Elementary Charge: 4 Coulomb --> 4 Coulomb No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
T = (Vt*e)/([BoltZ]) --> (25.85*4)/([BoltZ])
Evaluating ... ...
T = 7.48923411731177E+24
STEP 3: Convert Result to Output's Unit
7.48923411731177E+24 Kelvin --> No Conversion Required
FINAL ANSWER
7.48923411731177E+24 7.5E+24 Kelvin <-- Temperature of Liquid
(Calculation completed in 00.004 seconds)

Credits

Created by Prashant Singh
K J Somaiya College of science (K J Somaiya), Mumbai
Prashant Singh has created this Calculator and 700+ more calculators!
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

14 Temperature of Concentration Cell Calculators

Temperature of concentration cell with transference given valencies
Go Temperature of Liquid = ((EMF of Cell*Number of Positive and Negative Ions*Valencies of Positive and Negative Ions*[Faraday])/(Transport Number of Anion*Total number of Ions*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)
Temperature of Concentration Cell with Transference given Transport Number of Anion
Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*Transport Number of Anion*[R]))/(ln(Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient))
Temperature of Concentration Cell without Transference given Molalities
Go Temperature of Liquid = (EMF of Cell*([Faraday]/2*[R]))/(ln((Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient)))
Temperature of concentration cell without transference given concentration and fugacity
Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/ln((Cathodic Concentration*Cathodic Fugacity)/(Anodic Concentration*Anodic Fugacity))
Temperature of Concentration Cell with Transference given Activities
Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(Transport Number of Anion*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)
Temperature of concentration cell without transference for dilute solution given concentration
Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/(ln(Cathodic Concentration/Anodic Concentration))
Temperature of Concentration Cell without Transference given Activities
Go Temperature of Liquid = (EMF of Cell*([Faraday]/[R]))/(ln(Cathodic Ionic Activity/Anodic Ionic Activity))
Temperature given Tafel Slope
Go Temperature of Liquid = (Tafel Slope*Charge transfer coefficient*Elementary Charge)/(ln(10)*[BoltZ])
Temperature given Gibbs free entropy
Go Temperature of Liquid = ((Internal Energy+(Pressure*Volume))/(Entropy-Gibbs Free Entropy))
Temperature given Gibbs and Helmholtz free entropy
Go Temperature of Liquid = (Pressure*Volume)/(Helmholtz Free Entropy-Gibbs Free Entropy)
Temperature given internal energy and Helmholtz free entropy
Go Temperature of Liquid = Internal Energy/(Entropy-Helmholtz Free Entropy)
Temperature given Thermal Voltage and Electric Elementary Charge
Go Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ])
Temperature given Helmholtz free energy and Helmholtz free entropy
Go Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy)
Temperature given Gibbs free energy and Gibbs free entropy
Go Temperature of Liquid = -(Gibbs Free Energy/Gibbs Free Entropy)

Temperature given Thermal Voltage and Electric Elementary Charge Formula

Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ])
T = (Vt*e)/([BoltZ])

What is Tafel equation?

The Tafel equation is an equation in electrochemical kinetics relating the rate of an electrochemical reaction to the overpotential. The Tafel equation was first deduced experimentally and was later shown to have a theoretical justification. The equation is named after Swiss chemist Julius Tafel.
" It describes how the electrical current through an electrode depends on the voltage difference between the electrode and the bulk electrolyte for a simple, unimolecular redox reaction ".

How to Calculate Temperature given Thermal Voltage and Electric Elementary Charge?

Temperature given Thermal Voltage and Electric Elementary Charge calculator uses Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ]) to calculate the Temperature of Liquid, The Temperature given thermal voltage and electric elementary charge formula is defined as the direct proportion to the product of thermal voltage and elementary charge. Temperature of Liquid is denoted by T symbol.

How to calculate Temperature given Thermal Voltage and Electric Elementary Charge using this online calculator? To use this online calculator for Temperature given Thermal Voltage and Electric Elementary Charge, enter Thermal Voltage (Vt) & Elementary Charge (e) and hit the calculate button. Here is how the Temperature given Thermal Voltage and Electric Elementary Charge calculation can be explained with given input values -> 7.5E+24 = (25.85*4)/([BoltZ]).

FAQ

What is Temperature given Thermal Voltage and Electric Elementary Charge?
The Temperature given thermal voltage and electric elementary charge formula is defined as the direct proportion to the product of thermal voltage and elementary charge and is represented as T = (Vt*e)/([BoltZ]) or Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ]). Thermal Voltage is the voltage produced within the p-n junction & The Elementary charge is the electric charge carried out by a single proton or single elctron.
How to calculate Temperature given Thermal Voltage and Electric Elementary Charge?
The Temperature given thermal voltage and electric elementary charge formula is defined as the direct proportion to the product of thermal voltage and elementary charge is calculated using Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ]). To calculate Temperature given Thermal Voltage and Electric Elementary Charge, you need Thermal Voltage (Vt) & Elementary Charge (e). With our tool, you need to enter the respective value for Thermal Voltage & Elementary Charge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Temperature of Liquid?
In this formula, Temperature of Liquid uses Thermal Voltage & Elementary Charge. We can use 13 other way(s) to calculate the same, which is/are as follows -
  • Temperature of Liquid = Internal Energy/(Entropy-Helmholtz Free Entropy)
  • Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy)
  • Temperature of Liquid = ((Internal Energy+(Pressure*Volume))/(Entropy-Gibbs Free Entropy))
  • Temperature of Liquid = (Pressure*Volume)/(Helmholtz Free Entropy-Gibbs Free Entropy)
  • Temperature of Liquid = -(Gibbs Free Energy/Gibbs Free Entropy)
  • Temperature of Liquid = (Tafel Slope*Charge transfer coefficient*Elementary Charge)/(ln(10)*[BoltZ])
  • Temperature of Liquid = (EMF of Cell*([Faraday]/[R]))/(ln(Cathodic Ionic Activity/Anodic Ionic Activity))
  • Temperature of Liquid = (EMF of Cell*([Faraday]/2*[R]))/(ln((Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient)))
  • Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/ln((Cathodic Concentration*Cathodic Fugacity)/(Anodic Concentration*Anodic Fugacity))
  • Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/(ln(Cathodic Concentration/Anodic Concentration))
  • Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*Transport Number of Anion*[R]))/(ln(Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient))
  • Temperature of Liquid = ((EMF of Cell*[Faraday])/(Transport Number of Anion*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)
  • Temperature of Liquid = ((EMF of Cell*Number of Positive and Negative Ions*Valencies of Positive and Negative Ions*[Faraday])/(Transport Number of Anion*Total number of Ions*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!